Disclaimer
How to change front window regulator on VW Lupo 6X1 – replacement guide
downloads:
12
Views:
171
Important!
This replacement procedure can be used for:
VW Lupo (6X1, 6E1) 1.0, VW Lupo (6X1, 6E1) 1.4 16V, VW Lupo (6X1, 6E1) 1.7 SDI, VW Lupo (6X1, 6E1) 1.4 TDI, VW Lupo (6X1, 6E1) 1.4 FSI, VW Lupo (6X1, 6E1) 1.4, VW Lupo (6X1, 6E1) 1.0 … View more
The steps may slightly vary depending on the car design.
VW Lupo (6X1, 6E1) 1.0, VW Lupo (6X1, 6E1) 1.4 16V, VW Lupo (6X1, 6E1) 1.7 SDI, VW Lupo (6X1, 6E1) 1.4 TDI, VW Lupo (6X1, 6E1) 1.4 FSI, VW Lupo (6X1, 6E1) 1.4, VW Lupo (6X1, 6E1) 1.0 … View more
The steps may slightly vary depending on the car design.
How to change window regulator VW LUPO 6x1 [TUTORIAL AUTODOC]

All the parts you need to replace – Window Regulator for Lupo (6X1, 6E1) and other VW models
Alternative products

Electronic spray
Torque wrench
Drive socket # 10
Ratchet wrench
Phillips Screwdriver
Plastic trim tool
Replacement: window regulator – VW Lupo 6X1. AUTODOC experts recommend:
- All work should be done with the engine stopped.
Replacement: window regulator – VW Lupo 6X1. Use the following procedure:
- Step 1
Open the car door. - Step 2
Unscrew the fasteners of the lower door card. Use a Phillips screwdriver. - Step 3
Detach the lower door card. - Step 4
Remove the power window switch module. Use a plastic trim tool. - Step 5
Detach the power window connectors from the control unit. - Step 6
Detach the door handle trim panel. Use a plastic trim tool. - Step 7
Unscrew the door handle fastener. Use a Phillips screwdriver. - Step 8
Detach the door card. - Step 9
Remove the handle-to-lock cable. - Step 10
Remove the door card. - Step 11
Attach the power window connectors to the control unit. - Step 12
Lower the glass so that you can see the fasteners that connect it to the window regulator mechanism. - Step 13
Unscrew the window glass fasteners. Use a drive socket #10. Use a ratchet wrench. - Step 14Disconnect the glass from the window regulator mechanism.Step 15
Lift the glass up fully and secure it.Replacement: window regulator – VW Lupo 6X1. AUTODOC experts recommend:To avoid injury, hold the glass when raising it. - Step 16
Detach the power window connectors from the control unit. - Step 17
Unscrew the fasteners of the window regulator assembly. Use a drive socket #10. Use a ratchet wrench. - Step 18
Detach the connector from the power window motor. - Step 19
Remove the window regulator mechanism. - Step 20
Unscrew the power window motor fasteners. Use a Phillips screwdriver. - Step 21
Remove the power window motor. - Step 22
Install and screw in the motor fasteners on the new window regulator mechanism. Use a Phillips screwdriver. - Step 23
Treat the power window motor connector. Use dielectric grease. - Step 24
Install the new window regulator mechanism. - Step 25
Screw in the fasteners of the window regulator mechanism. Use a drive socket #10. Use a ratchet wrench.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the VW Lupo / Lupo 3L (6X1, 6E1) model
Popular maintenance tutorials for VW Lupo 6x1
Complete guides for changing the Window mechanism on different VW LUPO models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your VW Lupo (6X1, 6E1)
View more
5 more brake repair mistakes | Stop making these brake repair mistakes
How to tell if a tie rod is faulty
Why does it burn oil? The main cause of oil consumption in EA888 Gen 1
Top 5 reasons why your car squeals | AUTODOC Tips
Most commonly replaced car parts on VW LUPO
ОЕ number
Time to replace parts? Get even better deals in our Shop app.

SCAN ME






























