
Disclaimer
How to change front window regulator on Citroën Berlingo M – replacement guide
downloads:
6
Views:
406
Important!
This replacement procedure can be used for:
CITROËN Berlingo / Berlingo First Van (M_) 1.1 i (MAHDZ, MBHDZ, MBHFX), CITROËN Berlingo / Berlingo First Van (M_) 1.4 i (MBKFX, MBKFW), CITROËN Berlingo / Berlingo First Van (M_) 1.8 D (MBA9A, MCA9A), CITROËN Berlingo / Berlingo First Van (M_) 1.9 D 70 (MBWJZ, MCWJZ), CITROËN Berlingo / Berlingo First Van (M_) 1.9 D 70 4WD (MBWJZ, MCWJZ), CITROËN Berlingo / Berlingo First Van (M_) 2.0 HDI, CITROËN Berlingo / Berlingo First Van (M_) 1.4 i bivalent (MBKFW), CITROËN Berlingo / Berlingo First Van (M_) 1.4 bivalent, CITROËN Berlingo / Berlingo First Van (M_) 2.0 HDI 4WD, CITROËN Berlingo / Berlingo First Van (M_) 1.6 16V (MBNFU), CITROËN Berlingo / Berlingo First Van (M_) 1.6 HDI, CITROËN Berlingo / Berlingo First Van (M_) Electric, CITROËN Berlingo / Berlingo First Van (M_) 1.6 HDI, CITROËN Berlingo / Berlingo First Van (M_) 1.6 16V, CITROËN Berlingo / Berlingo First Van (M_) 1.9 D (MBDJY), CITROËN Berlingo / Berlingo First Van (M_) 1.6 HDI … View more
The steps may slightly vary depending on the car design.
CITROËN Berlingo / Berlingo First Van (M_) 1.1 i (MAHDZ, MBHDZ, MBHFX), CITROËN Berlingo / Berlingo First Van (M_) 1.4 i (MBKFX, MBKFW), CITROËN Berlingo / Berlingo First Van (M_) 1.8 D (MBA9A, MCA9A), CITROËN Berlingo / Berlingo First Van (M_) 1.9 D 70 (MBWJZ, MCWJZ), CITROËN Berlingo / Berlingo First Van (M_) 1.9 D 70 4WD (MBWJZ, MCWJZ), CITROËN Berlingo / Berlingo First Van (M_) 2.0 HDI, CITROËN Berlingo / Berlingo First Van (M_) 1.4 i bivalent (MBKFW), CITROËN Berlingo / Berlingo First Van (M_) 1.4 bivalent, CITROËN Berlingo / Berlingo First Van (M_) 2.0 HDI 4WD, CITROËN Berlingo / Berlingo First Van (M_) 1.6 16V (MBNFU), CITROËN Berlingo / Berlingo First Van (M_) 1.6 HDI, CITROËN Berlingo / Berlingo First Van (M_) Electric, CITROËN Berlingo / Berlingo First Van (M_) 1.6 HDI, CITROËN Berlingo / Berlingo First Van (M_) 1.6 16V, CITROËN Berlingo / Berlingo First Van (M_) 1.9 D (MBDJY), CITROËN Berlingo / Berlingo First Van (M_) 1.6 HDI … View more
The steps may slightly vary depending on the car design.
How to change window regulator CITROËN BERLINGO M [TUTORIAL AUTODOC]

All the parts you need to replace – Window Regulator for Berlingo / Berlingo First Van (M_) and other CITROËN models
Window regulator
Alternative products

Threadlocker
Torque wrench
Drive socket # 10
Torx bit T20
Torx bit T30
Ratchet wrench
Plastic trim tool
Replacement: window regulator – Citroën Berlingo M. Tip from AUTODOC:
- All work should be done with the engine stopped.
Replacement: window regulator – Citroën Berlingo M. Use the following procedure:
- Step 1Open the car door.
- Step 2Detach the window regulator handle. Use a plastic trim tool.AUTODOC recommends:Replacement: window regulator – Citroën Berlingo M. Do not use excessive force when removing the part as this may damage it.
- Step 3Detach the door handle trim panel. Use a plastic trim tool.AUTODOC recommends:Do not apply excessive force when removing the part. Otherwise you may damage it.
- Step 4Remove the door handle frame. Use a plastic trim tool.AUTODOC recommends:Replacement: window regulator – Citroën Berlingo M. To avoid damaging the part when removing it, do not use excessive force.
- Step 5Unscrew the lower fasteners of the door card. Use Torx T20.
- Step 6Unscrew the door handle fastener. Use Torx T30.
- Step 7Detach the door card.AUTODOC recommends:Do not apply excessive force when removing the part. Otherwise you may damage it.
- Step 8Remove the upper rubber seal.
- Step 9Remove the door card.
- Step 10Detach the door panel sound insulation.
- Step 11Remove the door handle.
- Step 12Attach the window regulator handle.
- Step 13Lower the glass so that you can see the fasteners that connect it to the window regulator mechanism.
- Step 14Detach the window regulator handle.
- Step 15Detach the glass fasteners. Use a plastic trim tool.
- Step 16Raise the glass a little and remove it.AUTODOC recommends:To avoid injury, hold the glass when raising it.Replacement: window regulator – Citroën Berlingo M. Do not use excessive force during installation. This may damage the part.
- Step 17Unscrew the fasteners of the window regulator assembly. Use a drive socket #10. Use a ratchet wrench.
- Step 18Remove the window regulator mechanism.
- Step 19Install the new window regulator mechanism.
- Step 20Treat the thread of the window regulator fasteners. Use threadlocker.
- Step 21Tighten the fasteners of the window regulator assembly. Use a drive socket #10. Use a torque wrench. Tighten it to 12 Nm torque.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the CITROËN Berlingo / Berlingo First I Van (M) model
Popular maintenance tutorials for Citroën Berlingo M
Complete guides for changing the Window mechanism on different CITROËN BERLINGO models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your CITROËN Berlingo / Berlingo First Van (M_)
View more
- Understanding Airbag Light Warnings | Essential Tips for Car Safety
- How to Get the Best Deals on Car Parts | Save Money with AUTODOC
- Which Coolant is Best? Comparison Test | AUTODOC
- 5 most common causes of oil leaks | AUTODOC tips
Most commonly replaced car parts on CITROËN BERLINGO
Time to replace parts? Get even better deals in our Shop app.

SCAN ME