Disclaimer
How to change front window regulator on Audi A4 B7 – replacement guide
downloads:
11
Views:
359
Important!
This replacement procedure can be used for:
AUDI A4 Saloon (8EC, B7) 2.0 TFSI quattro, AUDI A4 Saloon (8EC, B7) 3.2 FSI, AUDI A4 Saloon (8EC, B7) 3.2 FSI quattro, AUDI A4 Saloon (8EC, B7) 2.0 TDI, AUDI A4 Saloon (8EC, B7) 2.0 TDI 16V, AUDI A4 Saloon (8EC, B7) 3.0 TDI quattro, AUDI A4 Saloon (8EC, B7) 1.8 T, AUDI A4 Saloon (8EC, B7) 1.8 T quattro, AUDI A4 Saloon (8EC, B7) 2.0, AUDI A4 Saloon (8EC, B7) 1.6, AUDI A4 Saloon (8EC, B7) 1.9 TDI, AUDI A4 Saloon (8EC, B7) 2.5 TDI, AUDI A4 Saloon (8EC, B7) 2.0 TFSI, AUDI A4 Saloon (8EC, B7) 2.0 TFSI quattro, AUDI A4 Saloon (8EC, B7) 2.0 TDI quattro, AUDI A4 Saloon (8EC, B7) 2.0 TDI, AUDI A4 Saloon (8EC, B7) 2.0 TDI quattro, AUDI A4 Saloon (8EC, B7) 2.7 TDI, AUDI A4 Saloon (8EC, B7) 3.0 TDI quattro, AUDI A4 Saloon (8EC, B7) 2.0 TDI, AUDI A4 Saloon (8EC, B7) 2.0 TFSI, AUDI A4 Saloon (8EC, B7) 3.0 quattro, AUDI A4 Saloon (8EC, B7) 2.0 TDI, AUDI A4 Saloon (8EC, B7) 2.7 TDI … View more
The steps may slightly vary depending on the car design.
AUDI A4 Saloon (8EC, B7) 2.0 TFSI quattro, AUDI A4 Saloon (8EC, B7) 3.2 FSI, AUDI A4 Saloon (8EC, B7) 3.2 FSI quattro, AUDI A4 Saloon (8EC, B7) 2.0 TDI, AUDI A4 Saloon (8EC, B7) 2.0 TDI 16V, AUDI A4 Saloon (8EC, B7) 3.0 TDI quattro, AUDI A4 Saloon (8EC, B7) 1.8 T, AUDI A4 Saloon (8EC, B7) 1.8 T quattro, AUDI A4 Saloon (8EC, B7) 2.0, AUDI A4 Saloon (8EC, B7) 1.6, AUDI A4 Saloon (8EC, B7) 1.9 TDI, AUDI A4 Saloon (8EC, B7) 2.5 TDI, AUDI A4 Saloon (8EC, B7) 2.0 TFSI, AUDI A4 Saloon (8EC, B7) 2.0 TFSI quattro, AUDI A4 Saloon (8EC, B7) 2.0 TDI quattro, AUDI A4 Saloon (8EC, B7) 2.0 TDI, AUDI A4 Saloon (8EC, B7) 2.0 TDI quattro, AUDI A4 Saloon (8EC, B7) 2.7 TDI, AUDI A4 Saloon (8EC, B7) 3.0 TDI quattro, AUDI A4 Saloon (8EC, B7) 2.0 TDI, AUDI A4 Saloon (8EC, B7) 2.0 TFSI, AUDI A4 Saloon (8EC, B7) 3.0 quattro, AUDI A4 Saloon (8EC, B7) 2.0 TDI, AUDI A4 Saloon (8EC, B7) 2.7 TDI … View more
The steps may slightly vary depending on the car design.
How to change window regulator AUDI A4 (B7) [TUTORIAL AUTODOC]

All the parts you need to replace – Window Regulator for A4 Saloon (8EC, B7) and other AUDI models
Alternative products

Torque wrench
Drive socket # 10
Torx bit T20
Torx bit T25
Torx bit T27
Torx bit T30
Torx bit T45
Ratchet wrench
Phillips screwdriver
Round-nose pliers
Clip removal tool
Plastic trim tool
Fender cover
Replacement: window regulator – Audi A4 B7. AUTODOC recommends:
- Please note: all work on the car – Audi A4 B7 saloon – should be done with the engine switched off.
Replacement: window regulator – Audi A4 B7. Use the following procedure:
- Step 1
Open the hood. - Step 2Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.Step 3
Unscrew the fasteners of the car battery terminals. Use a drive socket #10. Use a ratchet wrench. - Step 4Remove the battery terminals.Step 5
Open the car door. - Step 6
Remove the door card trim panel. Use a plastic trim tool. - Step 7
Unscrew the upper fasteners of the door card. Use a Phillips screwdriver. - Step 8
Remove the door handle screw. Use a Phillips screwdriver. - Step 9
Unscrew the lower fasteners of the door card. Use a Phillips screwdriver. - Step 10
Detach the door card. Use a plastic trim tool.AUTODOC recommends:Replacement: window regulator – Audi A4 B7. Do not use excessive force when removing the part as this may damage it. - Step 11
Detach the door lock actuator cable. - Step 12
Detach the speaker connector. - Step 13
Detach the power window connectors from the control unit. Use a plastic trim tool. - Step 14
Remove the door card. - Step 15
Detach the power window connector from the door panel. - Step 16
Unscrew the fasteners of the power window motor. Use Torx T27. Use a ratchet wrench. - Step 17
Remove the power window motor. - Step 18
Detach the door panel sound insulation. - Step 19
Detach the speaker connector. - Step 20
Unscrew the fasteners of the speakers. Use Torx T25. Use a ratchet wrench. - Step 21
Remove the speakers. - Step 22
Unscrew the lower fasteners of the window regulator mechanism. Use Torx T25. Use a ratchet wrench. - Step 23
Squeeze the clips and detach the window regulator drive gear. Use round-nose pliers. - Step 24
Detach the side mirror trim panel. Use a plastic trim tool. - Step 25
Remove the wing mirror screws. Use Torx T30. Use a ratchet wrench. - Step 26
Remove the wing mirror. - Step 27
Unscrew the car door frame fasteners. Use Torx T45. Use a ratchet wrench. - Step 28
Remove the door frame fastener cap. Use a plastic trim tool. - Step 29
Unscrew the car door frame fasteners. Use Torx T45. Use a ratchet wrench. - Step 30
Detach the door weather strip. Use a plastic trim tool. - Step 31
Remove the glass together with the door trim frame.Replacement: window regulator – Audi A4 B7. Tip from AUTODOC:Do not apply excessive force when removing the part. Otherwise you may damage it. - Step 32
Disconnect the wiring of the wing mirror. Use a clip removal tool.Replacement: window regulator – Audi A4 B7. Tip:Be careful! Do not damage the wiring of the wing mirror. - Step 33
Unscrew the window glass fasteners. Use Torx T20. Use a ratchet wrench. - Step 34
Turn the window regulator drive gear. This is how you release the glass from the window regulator drive. Use round-nose pliers. - Step 35
Unscrew the fasteners of the window regulator drive gear. Use Torx T25. Use a ratchet wrench. - Step 36
Remove the window regulator mechanism. - Step 37
Install the new window regulator mechanism. - Step 38
Screw in the fasteners of the window regulator drive gear. Use Torx T25. Use a ratchet wrench. - Step 39
Reinstall the glass into the window regulator drive.AUTODOC recommends:Replacement: window regulator – Audi A4 B7. To avoid damaging the part during installation, do not use excessive force. - Step 40
Screw in the window glass fasteners. Use Torx T20. Use a ratchet wrench. - Step 41
Turn the window regulator drive gear. This way you will return the glass to its standard position. Use round-nose pliers. - Step 42
Tighten the window glass fasteners. Use Torx T20. Use a torque wrench. Tighten it to 11 Nm torque. - Step 43
Install the glass together with the door trim frame. - Step 44Сonnect the wiring of the wing mirror.Step 45
Install the side mirror. - Step 46
Screw in the side mirror fastener. Use Torx T30. Use a ratchet wrench.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 1
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the AUDI A4 B7 Saloon (8EC) model
Popular maintenance tutorials for Audi A4 B7
Complete guides for changing the Window mechanism on different AUDI A4 models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your AUDI A4 Saloon (8EC, B7)
View more
Drive with Care: 8 Common Bad Driving Habits Explained | AUTODOC
7 signs of faulty fuel injectors | AUTODOC tips
How to get your motorcycle ready for spring
How to Order Car Parts Online: Avoid These 5 Common Pitfalls
Most commonly replaced car parts on AUDI A4
Time to replace parts? Get even better deals in our Shop app.

SCAN ME











































