How to carry out replacement: Strut Mount 1.8 G60 VW Corrado 53i
Disclaimer
Change VW Corrado 53i 2.0 i 16V Strut Mount yourself – manuals and video tutorials

How to change front strut mount on VW Corrado (53i) – replacement guide

downloads: 4
Views: 97
Download your free tutorial and fix VW CORRADO (53I) 2.9 VR6 problems yourself Download for free 2.49 MB Strut Mount for VW Corrado 53i Shop now
Leave a comment Open in a new tab
Important!
This replacement procedure can be used for:
VW CORRADO (53I) 2.0 i 16V, VW CORRADO (53I) 2.9 VR6, VW CORRADO (53I) 2.0 i … View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Strut Mount for CORRADO (53I) and other VW models
How to change Top strut mount on VW Corrado 53i 1.8 G60 – step-by-step instructions for straightforward car repair Top strut mount
How to change Top strut mount on Corrado (53i) – tips for proper car maintenance
Top strut mount for Corrado (53i) Petrol (136 hp)
Simple DIY car repair steps – Replacing Top strut mount on Corrado (53i)
Top strut mount for Corrado (53i) Petrol (190 hp)
Easy tricks to help you to replace Top strut mount on Corrado (53i)
Top strut mount for Corrado (53i) Petrol (115 hp)
Tools
Replacement: strut mount – VW CORRADO (53I). Tools you'll need:
Wire brush
WD-40 spray
Brake cleaner
Copper grease
Torque wrench
Combination spanner #18
Combination spanner #21
Drive socket # 10
14.5-mm strut nut socket
Drive socket # 18
Drive socket # 21
HEX bit No.H6.
Wheel impact socket #17
Ratchet wrench
Tap wrench
Hydraulic strut spring compressor
Hydraulic transmission jack
Fender cover
Wheel chock
Buy tools
Replacement: strut mount – VW CORRADO (53I). Professionals recommend:
  • The replacement procedure is identical for the mounts of the left and right shock struts of the front suspension.
  • All mounts of the front shock struts should be replaced simultaneously.
  • Please note: all work on the car – VW CORRADO (53I) – should be done with the engine switched off.
Carry out replacement in the following order:
  1. Step 1
    Open the bonnet.
    Step 2
    Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
    Step 3
    How to change Strut Mount on VW Corrado 53i 1987 - free PDF and video manuals
    Clean the fasteners of the shock strut upper mount. Use a wire brush. Use WD-40 spray.
  2. Step 4
    How to replace VW CORRADO (53I) 1.8 G60 1988 Strut Mount - step-by-step manuals and video guides
    Loosen the upper fastener of the shock strut mount. Use HEX No.H6. Use a drive socket #21. Use a ratchet wrench.
  3. Step 5
    VW Corrado 53i 2.9 VR6 1989 Strut Mount replacement: free workshop manuals
    Secure the wheels with chocks.
  4. Step 6
    Changing Strut Mount on VW CORRADO (53I) 1.8 16V 1990 by yourself
    Loosen the wheel mounting bolts. Use wheel impact socket #17.
  5. Step 7
    Raise the front of the car and secure on supports.
    Step 8
    How to remove VW CORRADO 2.0 i 1991 Strut Mount - online easy-to-follow instructions
    Unscrew the wheel bolts.
    Replacement: strut mount – VW CORRADO (53I). Tip from AUTODOC experts:
    To avoid injury, hold up the wheel when unscrewing the bolts.
  6. Step 9
    How to replace Strut Mount on VW CORRADO (53I) 1992: download PDF manuals and video instructions
    Remove the wheel.
  7. Step 10
    Clean the fastener of the bracket that connects the brake hose to the shock strut.
    Step 11
    How hard is it to do yourself: Strut Mount replacement on VW Corrado 53i 1.8 G60 1993 - download illustrated guide
    Clean the fasteners connecting the shock strut to the steering knuckle. Use a wire brush. Use WD-40 spray.
  8. Step 12
    Need to know how to renew Strut Mount on VW CORRADO 1994? This free workshop manual will help you to do it yourself
    Unscrew the brake hose fastening bracket from the shock strut. Use a drive socket #10. Use a ratchet wrench.
  9. Step 13
    Changing of Strut Mount on VW Corrado 53i 1995 won't be an issue if you follow this illustrated step-by-step guide
    Disconnect the brake hose mounting bracket.
  10. Step 14
    VW CORRADO 2.0 i 16V Strut Mount replacement: online guides and video tutorials
    Unscrew the fasteners connecting the suspension strut to the steering knuckle. Use a combination spanner #18. Use a drive socket #18. Use a ratchet wrench.
  11. Step 15
    Replacing Strut Mount on VW Corrado 53i 1988 1.8 G60 by yourself
    Support the arm. Use a hydraulic transmission jack.
  12. Step 16
    CORRADO (53I) 2.0 i 1989 Strut Mount DIY replacement workshop manual
    Remove the fastening bolts.
  13. Step 17
    How to change Strut Mount on VW CORRADO (53I) 1990 - tips and tricks
    Disconnect the steering knuckle from the shock absorber strut.
  14. Step 18
    Step-by-step recommendations for DIY replacement VW Corrado 53i 1991 2.0 i Strut Mount
    Unscrew the top fastening of the shock strut mount.
    Replacement: strut mount – VW CORRADO (53I). AUTODOC recommends:
    To avoid injuries, hold the shock strut when undoing the fastening bolts.
  15. Step 19
    DIY replacement of Strut Mount on VW CORRADO (53I) 2.0 i 16V 1992 is not an issue anymore with our step-by-step tutorial
    Remove the suspension strut.
  16. Step 20
    How to change Strut Mount on VW Corrado 53i 1987 - free PDF and video manuals
    Set the shock absorber strut on the spring compressor tool.
    Replacement: strut mount – VW CORRADO (53I). Tip:
    Note that when using a spring compressor, spring coils need to be securely gripped, compressing the spring on the opposite sides.Ensure the correct position of the spring in the retainer.Make sure that the spring coils tightly entered the lock handles.
  17. Step 21
    How to replace VW CORRADO (53I) 1.8 G60 1988 Strut Mount - step-by-step manuals and video guides
    Treat the shock strut rod. Use a wire brush. Use WD-40 spray.
  18. Step 22
    VW Corrado 53i 2.9 VR6 1989 Strut Mount replacement: free workshop manuals
    Compress the spring.
  19. Step 23
    Changing Strut Mount on VW CORRADO (53I) 1.8 16V 1990 by yourself
    Remove the strut piston rod nut. Use a combination spanner #21. Use a 14.5-mm strut nut socket. Use a ratchet wrench.
  20. Step 24
    How to remove VW CORRADO 2.0 i 1991 Strut Mount - online easy-to-follow instructions
    Remove the top strut mount.
    Replacement: strut mount – VW CORRADO (53I). Tip from AUTODOC:
    Examine the shock absorber dust cap and the bump stop. Replace them if necessary.
  21. Step 25
    How to replace Strut Mount on VW CORRADO (53I) 1992: download PDF manuals and video instructions
    Install the upper strut mount and the strut mount bearing.
  22. Step 26
    How hard is it to do yourself: Strut Mount replacement on VW Corrado 53i 1.8 G60 1993 - download illustrated guide
    Tighten the shock strut piston rod nut. Use a combination spanner #21. Use a 14.5-mm strut nut socket. Use a torque wrench. Tighten it to 60 Nm torque.
    Replacement: strut mount – VW CORRADO (53I). Tip:
    Check to make sure the spring is positioned correctly. Avoid its misalignment.
  23. Step 27
    Need to know how to renew Strut Mount on VW CORRADO 1994? This free workshop manual will help you to do it yourself
    Treat the shock strut rod. Use copper grease.
  24. Step 28
    Changing of Strut Mount on VW Corrado 53i 1995 won't be an issue if you follow this illustrated step-by-step guide
    Decompress the spring.
  25. Step 29
    Remove the assembled shock strut.
    Step 30
    VW CORRADO 2.0 i 16V Strut Mount replacement: online guides and video tutorials
    Clean the mounting seats of the shock strut. Use a wire brush. Use WD-40 spray.
  26. Step 31
    Replacing Strut Mount on VW Corrado 53i 1988 1.8 G60 by yourself
    Install the shock strut into the wheel arch.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the VW Corrado (53i) model.

Browse tyres

Popular maintenance tutorials for VW Corrado 53i

More manuals for VW Corrado 53i

Complete guides for changing the Strut mount on different VW CORRADO models

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
VW CORRADO (53I) Strut Mount replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY VW CORRADO (53I) Strut Mount replacement - online guide
Tips & tricks for your VW CORRADO (53I)
View more
  • How to change Strut mount on VW CORRADO (53I) 2.0 i 16V - replacement tricks
    DIY alternator repair | AUTODOC tips
    1M views
    Published on: 30/11/2022
  • Changing Top mount VW Corrado 53i 1.8 G60 - Replacement Tips
    Coolant comparison test | AUTODOC
    4K views
    Published on: 13/10/2022
  • Maintenance Hacks - VW CORRADO (53I) 2.9 VR6 Top strut mount replacement guide
    4 reasons why your CHECK ENGINE light is on | AUTODOC tips
    6K views
    Published on: 30/03/2022
  • Replace Top mounts on VW Corrado 53i - free video tips
    How to unlock your car without a key | AUTODOC tips
    847K views
    Published on: 15/09/2022

Most commonly replaced car parts on VW CORRADO

Professional manuals for the most common VW models