How to carry out replacement: Strut Mount 1.8 Nissan Almera Tino
Disclaimer
Change Nissan Almera Tino 2.0 Strut Mount yourself – manuals and video tutorials

How to change front strut mount on NISSAN ALMERA TINO (V10) – replacement guide

downloads: 5
Views: 62
Download your free tutorial and fix NISSAN ALMERA TINO (V10) 2.2 dCi problems yourself Download for free 1.74 MB Strut Mount for Nissan Almera Tino Shop now
Leave a comment Open in a new tab
Important!
This replacement procedure can be used for:
NISSAN ALMERA TINO (V10) 1.8, NISSAN ALMERA TINO (V10) 2.0, NISSAN ALMERA TINO (V10) 2.2 dCi, NISSAN ALMERA TINO (V10) 2.2 dCi, NISSAN ALMERA TINO (V10) 2.2 dCi, NISSAN ALMERA TINO (V10) 1.8 … View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Strut Mount for ALMERA TINO (V10) and other NISSAN models
Alternative products
How to change Top strut mount on Nissan Almera Tino 1.8 – step-by-step instructions for straightforward car repair Top strut mount
Tools
Replacement: strut mount – NISSAN ALMERA TINO (V10). Tools you'll need:
Wire brush
WD-40 spray
Brake cleaner
Copper grease
Combination spanner #11
Combination spanner #17
Drive socket # 19
Wheel impact socket #21
Ratchet wrench
Torque wrench
Hammer
Flat Screwdriver
Crow bar
Pliers
Hydraulic strut spring compressor
Fender cover
Wheel chock
Buy tools
Replacement: strut mount – NISSAN ALMERA TINO (V10). Tip from AUTODOC:
  • All mounts of the front shock struts should be replaced simultaneously.
  • The replacement procedure is identical for the mounts of the left and right shock struts of the front suspension.
  • Be sure to replace all self-locking nuts and bolts during installation.
  • All work should be done with the engine stopped.
Replacement: strut mount – NISSAN ALMERA TINO (V10). Recommended sequence of steps:
  1. Step 1
    How to change Strut Mount on Nissan Almera Tino 1998 - free PDF and video manuals
    Secure the wheels with chocks.
  2. Step 2
    How to replace NISSAN ALMERA TINO (V10) 1.8 1999 Strut Mount - step-by-step manuals and video guides
    Loosen the wheel mounting bolts. Use wheel impact socket #21.
  3. Step 3
    Raise the front of the car and secure on supports.
    Step 4
    Nissan Almera Tino 2.2 dCi 2000 Strut Mount replacement: free workshop manuals
    Unscrew the wheel bolts.
    Replacement: strut mount – NISSAN ALMERA TINO (V10). Tip:
    To avoid injury, hold up the wheel when unscrewing the bolts.
  4. Step 5
    Changing Strut Mount on NISSAN ALMERA TINO (V10) 1.8 2001 by yourself
    Remove the wheel.
  5. Step 6
    How to remove NISSAN ALMERA 2.2 dCi 2002 Strut Mount - online easy-to-follow instructions
    Disconnect the brake hose holder from the shock absorber strut. Use pliers.
  6. Step 7
    How to replace Strut Mount on NISSAN ALMERA TINO (V10) 2003: download PDF manuals and video instructions
    Disconnect the wiring and the brake hose from the bracket on the shock strut. Use a flat screwdriver.
  7. Step 8
    Clean the fasteners connecting the shock strut to the steering knuckle. Use a wire brush. Use WD-40 spray.
    Step 9
    How hard is it to do yourself: Strut Mount replacement on Nissan Almera Tino 1.8 2004 - download illustrated guide
    Unscrew the lower fastener connecting the shock strut to the steering knuckle. Use a combination spanner #17. Use a drive socket #19. Use a ratchet wrench.
  8. Step 10
    Remove the fastening bolts. Disconnect the steering knuckle from the shock absorber strut.
    Step 11
    Lower the car. Open the hood.
    Step 12
    Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
    Step 13
    Clean the fasteners of the shock strut upper mount. Use a wire brush. Use WD-40 spray.
    Step 14
    Need to know how to renew Strut Mount on NISSAN ALMERA 2005? This free workshop manual will help you to do it yourself
    Unscrew the top fastening of the shock strut mount. Use a combination spanner #11.
    AUTODOC recommends:
    Important! Hold the suspension strut while unscrewing the fastening bolts. NISSAN ALMERA TINO (V10)
  9. Step 15
    Changing of Strut Mount on Nissan Almera Tino 2006 won't be an issue if you follow this illustrated step-by-step guide
    Remove the suspension strut.
  10. Step 16
    NISSAN ALMERA 2.0 Strut Mount replacement: online guides and video tutorials
    Set the shock absorber strut on the spring compressor tool.
    Replacement: strut mount – NISSAN ALMERA TINO (V10). Tip:
    Note that when using a spring compressor, spring coils need to be securely gripped, compressing the spring on the opposite sides.Ensure the correct position of the spring in the retainer.Make sure that the spring coils tightly entered the lock handles.
  11. Step 17
    Compress the spring.
    Step 18
    Replacing Strut Mount on Nissan Almera Tino 1999 1.8 by yourself
    Treat the shock strut rod. Use a wire brush. Use WD-40 spray.
  12. Step 19
    ALMERA TINO (V10) 2.2 dCi 2000 Strut Mount DIY replacement workshop manual
    Remove the strut piston rod nut. Use a combination spanner #17.
  13. Step 20
    How to change Strut Mount on NISSAN ALMERA TINO (V10) 2001 - tips and tricks
    Remove the top strut mount. Use a crowbar.
    Replacement: strut mount – NISSAN ALMERA TINO (V10). AUTODOC recommends:
    Examine the shock absorber dust cap and the bump stop. Replace them if necessary.
  14. Step 21
    Step-by-step recommendations for DIY replacement Nissan Almera Tino 2002 2.2 dCi Strut Mount
    Install the upper strut mount and the strut mount bearing.
  15. Step 22
    DIY replacement of Strut Mount on NISSAN ALMERA TINO (V10) 2.0 2003 is not an issue anymore with our step-by-step tutorial
    Tighten the shock strut piston rod nut. Use a combination spanner #17. Use a torque wrench. Tighten it to 60 Nm torque.
    Replacement: strut mount – NISSAN ALMERA TINO (V10). Tip from AUTODOC:
    Check to make sure the spring is positioned correctly. Avoid its misalignment.
  16. Step 23
    How to change Strut Mount on Nissan Almera Tino 1998 - free PDF and video manuals
    Treat the shock strut rod. Use copper grease.
  17. Step 24
    How to replace NISSAN ALMERA TINO (V10) 1.8 1999 Strut Mount - step-by-step manuals and video guides
    Decompress the spring. Remove the assembled shock strut.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the NISSAN Almera Tino (V10) model

Nissan Almera Tino tyre size

Popular maintenance tutorials for Nissan Almera Tino

More manuals for Nissan Almera Tino

Complete guides for changing the Strut mount on different NISSAN ALMERA models

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY NISSAN ALMERA TINO (V10) Strut Mount replacement - online guide
Tips & tricks for your NISSAN ALMERA TINO (V10)
View more
  • How to change Strut mount on NISSAN ALMERA TINO (V10) 2.0 - replacement tricks
    How to Fix P0401 ✅ error code Insufficient EGR flow
    7K views
    Published on: 08/05/2025
  • Changing Top mount Nissan Almera Tino 1.8 - Replacement Tips
    Top 5 Mistakes to Avoid for Safe Engine Bay Repairs | AUTODOC Tips
    9K views
    Published on: 04/08/2023
  • Maintenance Hacks - NISSAN ALMERA TINO (V10) 2.2 dCi Top strut mount replacement guide
    How to align the timing marks correctly on an EA888 engine
    6K views
    Published on: 31/07/2025
  • Replace Top mounts on Nissan Almera Tino - free video tips
    Top 5 reasons why your car squeals | AUTODOC Tips
    10K views
    Published on: 26/10/2023

Most commonly replaced car parts on NISSAN ALMERA

Professional manuals for the most common NISSAN models

ОЕ number
Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
NISSAN ALMERA TINO (V10) Strut Mount replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME