Important!
This replacement procedure can be used for:
MERCEDES-BENZ C-Class Saloon (W202) C 250 D (202.125) View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Control Arm for C-Class Saloon (W202) and other MERCEDES-BENZ models
Tools
Replacement: front lower arm – MERCEDES-BENZ C-CLASS (W202). List of the tools you'll need:
Wire brush
WD-40 spray
Brake cleaner
Ceramic grease
Copper grease
Torque wrench
Combination spanner #21
Combination spanner #22
Torx bit E20
Wheel impact socket #17
Ratchet wrench
Ball joint puller
Hydraulic transmission jack
Wheel chock
Replacement: front lower arm – MERCEDES-BENZ C-CLASS (W202). Tip from AUTODOC experts:
  • The replacement procedure is identical for the left and right lower control arms.
  • Please note: all work on the car – MERCEDES-BENZ C-CLASS (W202) – should be done with the engine switched off.
Carry out replacement in the following order:
  1. Step 1
    Secure the wheels with chocks.
    Step 2
    How to change Control Arm on W202 1993 - free PDF and video manuals
    Loosen the wheel mounting bolts. Use wheel impact socket #17.
  2. Step 3
    Raise the car.
    Replacement: front lower arm – MERCEDES-BENZ C-CLASS (W202). AUTODOC recommends:
    If you are using a jack, make sure it rests on a flat surface without any unevenness.Be sure to additionally secure the car with jack stands.
    Step 4
    How to replace MERCEDES-BENZ C-Class Saloon (W202) C 180 1.8 (202.018) 1994 Control Arm - step-by-step manuals and video guides
    Unscrew the wheel bolts.
    AUTODOC recommends:
    Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. MERCEDES-BENZ C-CLASS (W202)
  3. Step 5
    W202 C 250 2.5 Turbo Diesel (202.128) 1995 Control Arm replacement: free workshop manuals
    Remove the wheel.
  4. Step 6
    Changing Control Arm on MERCEDES-BENZ C-Class Saloon (W202) C 220 CDI 2.2 (202.133) 1996 by yourself
    Clean all joints of the arm. Use a wire brush. Use WD-40 spray.
  5. Step 7
    How to remove MERCEDES-BENZ C-CLASS C 200 2.0 (202.020) 1997 Control Arm - online easy-to-follow instructions
    Unscrew the fastener connecting the control arm to the subframe. Use a combination spanner #21. Use Torx E20. Use a ratchet wrench.
  6. Step 8
    How to replace Control Arm on MERCEDES-BENZ C-Class Saloon (W202) 1998: download PDF manuals and video instructions
    Unscrew the ball joint fastening to the steering knuckle. Use a combination spanner #21.
  7. Step 9
    How hard is it to do yourself: Control Arm replacement on W202 C 250 D 2.5 (202.125) 1999 - download illustrated guide
    Prop up the steering knuckle. Use a hydraulic transmission jack.
  8. Step 10
    Need to know how to renew Control Arm on MERCEDES-BENZ C-CLASS 2000? This free workshop manual will help you to do it yourself
    Disconnect the ball joint from the steering knuckle. Use a ball joint puller.
  9. Step 11
    Changing of Control Arm on W202 1993 won't be an issue if you follow this illustrated step-by-step guide
    Remove the support from under the steering knuckle.
    AUTODOC recommends:
    Replacement: front lower arm – MERCEDES-BENZ C-CLASS (W202). Lower the transmission jack smoothly, without jerks, to avoid damaging components and mechanisms.
  10. Step 12
    MERCEDES-BENZ C-CLASS C 220 2.2 (202.022) Control Arm replacement: online guides and video tutorials
    Remove the fastening bolt.
  11. Step 13
    Replacing Control Arm on W202 1995 C 180 1.8 (202.018) by yourself
    Remove the arm.
  12. Step 14
    C-Class Saloon (W202) C 200 2.0 (202.020) 1996 Control Arm DIY replacement workshop manual
    Clean the suspension arm mounting seats. Use a wire brush. Use WD-40 spray.
  13. Step 15
    How to change Control Arm on MERCEDES-BENZ C-Class Saloon (W202) 1997 - tips and tricks
    Install a new arm.
    Replacement: front lower arm – MERCEDES-BENZ C-CLASS (W202). Tip from AUTODOC:
    During the installation process, use only new bolts and nuts.
  14. Step 16
    Step-by-step recommendations for DIY replacement W202 1998 C 200 2.0 (202.020) Control Arm
    Install the fastening bolt.
  15. Step 17
    DIY replacement of Control Arm on MERCEDES-BENZ C-Class Saloon (W202) C 220 D 2.2 (202.121) 1999 is not an issue anymore with our step-by-step tutorial
    Connect the ball joint to the steering knuckle.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the MERCEDES-BENZ C-Class Saloon (W202) model.

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
MERCEDES-BENZ C-Class Saloon (W202) Control Arm replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY MERCEDES-BENZ C-Class Saloon (W202) Control Arm replacement - online guide
Tips & tricks for your MERCEDES-BENZ C-Class Saloon (W202)
View more
  • How to change Control arm on MERCEDES-BENZ C-Class Saloon (W202) C 220 D 2.2 (202.121) - replacement tricks
    5 most common causes of oil leaks | AUTODOC tips
  • Changing Wishbone W202 C 180 1.8 (202.018) - Replacement Tips
    Top 5 mistakes when working in the engine bay | AUTODOC tips
  • Maintenance Hacks - MERCEDES-BENZ C-Class Saloon (W202) C 250 2.5 Turbo Diesel (202.128) Control arms replacement guide
    How to paint a brake caliper | AUTODOC tips
  • Replace Trailing arm on W202 - free video tips
    5 car interior cleaning mistakes | AUTODOC tips