When to replace the Brake Pads on your AUDI 100
Recommended replacement interval for the part category Brake pad set : 30000 km
Important!
This replacement procedure can be used for:
AUDI 100 Saloon (44, 44Q, C3) 1.8 quattro, AUDI 100 Saloon (44, 44Q, C3) 2.3 quattro, AUDI 100 Saloon (44, 44Q, C3) 2.3 E quattro, AUDI 100 Saloon (44, 44Q, C3) 2.2 E Turbo quattro, AUDI 100 Saloon (44, 44Q, C3) 1.8 Cat quattro, AUDI 100 Saloon (44, 44Q, C3) 1.8 quattro View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

Tools
Replacement: brake pads – AUDI 100 (44, 44Q, C3). List of the tools you'll need:
Wire brush
WD-40 spray
Brake cleaner
Copper grease
Anti-squeal paste
High-temperature ceramic grease
Torque wrench
Combination spanner #15
Drive socket # 13
Wheel impact socket #17
Brake caliper wind back tool
Ratchet wrench
Crow bar
Wheel chock
Replacement: brake pads – AUDI 100 (44, 44Q, C3). Tip from AUTODOC experts:
  • Perform the replacement of brake pads in complete set for each axis. This provides effective braking.
  • The replacement procedure is identical for all brake pads on the same axle.
  • All work should be done with the engine stopped.
Replacement: brake pads – AUDI 100 (44, 44Q, C3). Use the following procedure:
  1. Step 1
    Open the bonnet. Unscrew the brake fluid reservoir cap.
    Step 2
    How to change Brake Pads on Audi 100 C3 1982 - free PDF and video manuals
    Secure the wheels with chocks.
  2. Step 3
    How to replace AUDI 100 Saloon (44, 44Q, C3) 2.3 E 1983 Brake Pads - step-by-step manuals and video guides
    Loosen the wheel mounting bolts. Use wheel impact socket #17.
  3. Step 4
    Raise the front of the car and secure on supports.
    Step 5
    Audi 100 C3 2.3 E quattro 1984 Brake Pads replacement: free workshop manuals
    Unscrew the wheel bolts.
    AUTODOC recommends:
    Important! Hold the wheel while unscrewing the fastening bolts. AUDI 100 (44, 44Q, C3)
  4. Step 6
    Changing Brake Pads on AUDI 100 Saloon (44, 44Q, C3) 1.8 Cat 1985 by yourself
    Remove the wheel.
  5. Step 7
    Clean the brake caliper fasteners. Use a wire brush. Use a brake cleaner.
    Step 8
    How to remove AUDI 100 2.2 1986 Brake Pads - online easy-to-follow instructions
    Unscrew the brake caliper fastening. Use a combination spanner #15. Use a drive socket #13. Use a ratchet wrench.
  6. Step 9
    How to replace Brake Pads on AUDI 100 Saloon (44, 44Q, C3) 1987: download PDF manuals and video instructions
    Spread the brake pads. Use a crowbar.
  7. Step 10
    How hard is it to do yourself: Brake Pads replacement on Audi 100 C3 2.2 E Turbo quattro 1988 - download illustrated guide
    Remove the brake caliper. Use a crowbar.
    Replacement: brake pads – AUDI 100 (44, 44Q, C3). AUTODOC recommends:
    Tie the caliper to the suspension or to the body with a wire without disconnecting from the brake hose to prevent depressurization of the brake system.Make sure that the brake caliper is not hanging on the brake hose.Don't press the brake pedal after the brake caliper has been removed. As a result, the piston can fall out from the brake cylinder, and brake fluid leakage and depressurization of the system may occur. Check the brake caliper bracket, brake caliper guide pins and boots. Clean them. Replace, if necessary.
  8. Step 11
    Need to know how to renew Brake Pads on AUDI 100 1989? This free workshop manual will help you to do it yourself
    Remove the brake pads.
    Replacement: brake pads – AUDI 100 (44, 44Q, C3). AUTODOC recommends:
    Measure the brake disc thickness. Upon reaching the wear limit the part must be replaced.
  9. Step 12
    Changing of Brake Pads on Audi 100 C3 1990 won't be an issue if you follow this illustrated step-by-step guide
    Treat the brake caliper piston. Use a brake cleaner.
  10. Step 13
    AUDI 100 2.3 E Brake Pads replacement: online guides and video tutorials
    Press in the brake caliper piston. Use brake caliper wind back tool.
  11. Step 14
    Replacing Brake Pads on Audi 100 C3 1982 2.3 E by yourself
    Clean the brake caliper bracket from dirt and dust. Use a wire brush. Use a brake cleaner.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the AUDI 100 C3 Saloon (44, 44Q) model.

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
AUDI 100 Saloon (44, 44Q, C3) Brake Pads replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY AUDI 100 Saloon (44, 44Q, C3) Brake Pads replacement - online guide
Tips & tricks for your AUDI 100 Saloon (44, 44Q, C3)
View more
  • How to change Brake pad set on AUDI 100 Saloon (44, 44Q, C3) 2.0 Cat - replacement tricks
    How to restore wheel rims | AUTODOC tips
  • Changing Disc pads Audi 100 C3 2.3 E - Replacement Tips
    What to do if your car heater isn't working | AUTODOC tips
  • Maintenance Hacks - AUDI 100 Saloon (44, 44Q, C3) 2.3 E quattro Brake pad kit replacement guide
    How to check your head gasket | AUTODOC
  • Replace Disc brake pads on Audi 100 C3 - free video tips
    How to replace a wheel stud | AUTODOC tips

Professional manuals for the most common AUDI models