Recommended replacement interval for the part category Brake Hose : 50000 km

Important!

This replacement procedure can be used for:
BMW 3 Touring (E46) 318 d, BMW 3 Touring (E46) 320 i, BMW 3 Touring (E46) 320 d, BMW 3 Touring (E46) 330 i, BMW 3 Touring (E46) 320 i, BMW 3 Touring (E46) 325 i, BMW 3 Touring (E46) 316 i, BMW 3 Touring (E46) 318 d, BMW 3 Touring (E46) 318 i, BMW 3 Touring (E46) 328 i, BMW 3 Touring (E46) 320 d, BMW 3 Touring (E46) 320 i, BMW 3 Touring (E46) 318 i, BMW 3 Touring (E46) 318 i, BMW 3 Touring (E46) 330 d … View more

The steps may slightly vary depending on the car design.

How to change brake hose on BMW 3 (E46) [TUTORIAL AUTODOC]

All the parts you need to replace – Brake Hose for 3 Touring (E46) and other BMW models

Brake Hose

Holding Bracket, brake hose

        Brake Hose for BMW 3 Touring (E46) 318 d Diesel (115 hp)
      
        Brake Hose for BMW 3 Touring (E46) 320 i Petrol (170 hp)
      
        Brake Hose for BMW 3 Touring (E46) 320 i Petrol (150 hp)
      
        Brake Hose for BMW 3 Touring (E46) 330 d Diesel (204 hp)
      
        Brake Hose for BMW 3 Touring (E46) 325 i Petrol (192 hp)
      
        Brake Hose for BMW 3 Touring (E46) 318 i Petrol (118 hp)
      
        Brake Hose for BMW 3 Touring (E46) 318 d Diesel (116 hp)
      
        Brake Hose for BMW 3 Touring (E46) 320 d Diesel (150 hp)
      
        Brake Hose for BMW 3 Touring (E46) 328 i Petrol (193 hp)

Replacement: brake hose – BMW E46 touring. Tools you need:

                        Wire brush
                      
                        WD-40 spray
                      
                        Brake cleaner 
                      
                        Copper grease 
                      
                        Combination spanner #9
                      
                        Combination spanner #10
                      
                        Combination spanner #14
                      
                        Wheel impact socket #17
                      
                        Ratchet wrench
                      
                        Torque wrench
                      
                        Brake bleeder kit
                      
                        Fluid container
                      
                        Wheel chock

Buy tools

Replacement: brake hose – BMW E46 touring. AUTODOC recommends:

The replacement procedure is identical for the right and left brake hoses on the same axle.
All work should be done with the engine stopped.

Replacement: brake hose – BMW E46 touring. Take the following steps:

Step 1

Open the bonnet.Unscrew the brake fluid reservoir cap.
Step 2

Secure the wheels with chocks.
Step 3

Loosen the wheel mounting bolts.Use wheel impact socket #17.
Step 4

Raise the front of the car and secure on supports.
Step 5

Unscrew the wheel bolts.

AUTODOC recommends:

Important! Hold the wheel while unscrewing the fastening bolts. BMW E46 touring
Step 6

Remove the wheel.
Step 7.1

Clean the area where the brake hose is connected to the brake caliper and to the brake circuit pipe.

Step 7.2

Use a wire brush.Use WD-40 spray.
Step 8

Put a container for gathering brake fluid beneath.
Step 9

Unscrew the fastener connecting the brake hose to the brake circuit pipe. Use a combination spanner #10.
Step 10

Detach the brake hose from the shock strut.
Step 11

Loosen the brake hose fastening.Use a combination spanner #14.
Step 12

Unscrew the brake hose from the brake caliper.
Step 13

Screw the new brake hose onto the brake caliper.
Step 14

Tighten the fastener connecting the brake pipe to the brake caliper.Use a combination spanner #14.Use a torque wrench.Tighten it to 22 Nm torque.
Step 15

Clean the brake hose mounting seat on the brake circuit pipe.Use a brake cleaner.

Replacement: brake hose – BMW E46 touring. AUTODOC experts recommend:

After applying the spray, wait a few minutes.
Step 16

Tighten the fastener connecting the brake hose to the brake circuit pipe. Use a combination spanner #10.Use a torque wrench.Tighten it to 14 Nm torque.
Step 17

Clean the area where the brake hose is connected to the brake caliper and to the brake circuit pipe.Use a brake cleaner.

AUTODOC recommends:

Replacement: brake hose – BMW E46 touring. After applying the spray, wait a few minutes.
Step 18

Fasten the brake hose on the strut.
Step 19

Connect the brake bleeder kit to the brake bleeder screw.
Step 20

Undo the brake bleeder screw.Use a combination spanner #9.
Step 21

Press the brake pedal several times to remove any air from the system.
Step 22

Tighten the brake bleeder screw.Use a combination spanner #9.
Step 23

Disconnect the brake bleeder kit.
Step 24

Clean dirt from the brake hose bolt.Use a brake cleaner.

Replacement: brake hose – BMW E46 touring. Tip:

After applying the spray, wait a few minutes.
Step 25

Clean the brake disk surface.Use a wire brush.Treat the surface where the brake disc contacts the wheel rim. Use copper grease.
Step 26

Install the wheel.

AUTODOC recommends:

To avoid injury, hold up the wheel when screwing in the fastening bolts.
Step 27

Screw in the wheel bolts.Use wheel impact socket #17.
Step 28

Lower the car and working in a cross order, tighten the wheel bolts.Use a torque wrench.Tighten it to 120 Nm torque.
Step 29

Remove the jacks and chocks.
Step 30

Check the brake fluid level in the expansion tank and refill if necessary.
Step 31

Tighten the brake fluid reservoir cap. Close the hood.

Comment

Was this manual helpful?

Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.

How to change rear brake pad wear sensor on BMW E46 Touring – replacement guide

Free download PDF

2.14 MB
How to change front brake pad wear sensor on BMW E46 Touring – replacement guide

Free download PDF

2.15 MB
How to change rear brake discs on BMW E46 touring – replacement guide

Free download PDF

3.12 MB
How to change rear brake pads on BMW E46 touring – replacement guide

Free download PDF

2.59 MB
How to change front brake pads on BMW E46 touring – replacement guide

Free download PDF

2.49 MB
How to change front brake discs on BMW E46 touring – replacement guide

Free download PDF

2.91 MB

How to change front brake hose on BMW 3 Coupe (E46) – replacement guide

Free download PDF

2.73 MB
How to change front brake hose on BMW 3 Saloon (E46) – replacement guide

Free download PDF

2.73 MB
How to change front brake hose on BMW E46 convertible – replacement guide

Free download PDF

2.78 MB
How to change front brake hose on BMW 3 Compact (E46) – replacement guide

Free download PDF

2.72 MB
How to change front brake hose on BMW Z4 Roadster (E85) – replacement guide

Free download PDF

2.72 MB
How to change front brake hose on BMW Z4 Coupe (E86) – replacement guide

Free download PDF

2.72 MB

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!

Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.

Scan

To download the app:

- scan the QR code
- download from App Store
- download from Google Play

Tips & tricks for your BMW 3 Touring (E46)

Checking the starter without removing it | AUTODOC tips

7K views

Published on: 01/12/2020
What to check when buying a used car | AUTODOC tips

4K views

Published on: 24/10/2020
TOP 6 WD-40 lifehacks | AUTODOC tips

10K views

Published on: 15/07/2021
How to easily repair a punctured tyre | AUTODOC tips

3K views

Published on: 25/02/2021