Disclaimer
How to change front brake discs on Renault Clio 3 – replacement guide
downloads:
17
Views:
267
Recommended replacement interval for the part category Brake disc : 50000 km
Important!
This replacement procedure can be used for:
RENAULT Clio III Hatchback (BR0/1, CR0/1) 1.2 16V, RENAULT Clio III Hatchback (BR0/1, CR0/1) 1.2 16V (BR02, BR0J, BR11, CR02, CR0J, CR11), RENAULT Clio III Hatchback (BR0/1, CR0/1) 1.2 16V, RENAULT Clio III Hatchback (BR0/1, CR0/1) 1.2 16V (BR0R, BR1D, BR1L, CR0R), RENAULT Clio III Hatchback (BR0/1, CR0/1) 1.6 16V (BR09, BR0T, CR09, CR0T), RENAULT Clio III Hatchback (BR0/1, CR0/1) 1.6 16V (BR05, BR0B, BR0Y, BR15, BR1J, BR1M, BR1Y, CR0B,..., RENAULT Clio III Hatchback (BR0/1, CR0/1) 1.4 16V, RENAULT Clio III Hatchback (BR0/1, CR0/1) 1.5 dCi (C/BR0G, C/BR1G), RENAULT Clio III Hatchback (BR0/1, CR0/1) 1.5 dCi (BR17, CR17), RENAULT Clio III Hatchback (BR0/1, CR0/1) 1.5 dCi (BR0H, CR0H, CR1S, BR1S), RENAULT Clio III Hatchback (BR0/1, CR0/1) 1.5 dCi (BR1C, CR1C), RENAULT Clio III Hatchback (BR0/1, CR0/1) 2.0 16V (BR0C, BR0K, CR0C, CR0K), RENAULT Clio III Hatchback (BR0/1, CR0/1) 1.2 16V (BR0P, CR0P), RENAULT Clio III Hatchback (BR0/1, CR0/1) 1.2 (BR01, BR03, BR0E, CR0E), RENAULT Clio III Hatchback (BR0/1, CR0/1) 1.5 dCi, RENAULT Clio III Hatchback (BR0/1, CR0/1) 1.2 16V, RENAULT Clio III Hatchback (BR0/1, CR0/1) 1.5 dCi, RENAULT Clio III Hatchback (BR0/1, CR0/1) 1.2 16V Hi-Flex (BR1U, CR1U), RENAULT Clio III Hatchback (BR0/1, CR0/1) 1.5 dCi, RENAULT Clio III Hatchback (BR0/1, CR0/1) 1.6 16V GT (BR10, CR10), RENAULT Clio III Hatchback (BR0/1, CR0/1) 1.5 dCi, RENAULT Clio III Hatchback (BR0/1, CR0/1) 1.2 Ethanol (CR1U, BR1U) … View more
The steps may slightly vary depending on the car design.
RENAULT Clio III Hatchback (BR0/1, CR0/1) 1.2 16V, RENAULT Clio III Hatchback (BR0/1, CR0/1) 1.2 16V (BR02, BR0J, BR11, CR02, CR0J, CR11), RENAULT Clio III Hatchback (BR0/1, CR0/1) 1.2 16V, RENAULT Clio III Hatchback (BR0/1, CR0/1) 1.2 16V (BR0R, BR1D, BR1L, CR0R), RENAULT Clio III Hatchback (BR0/1, CR0/1) 1.6 16V (BR09, BR0T, CR09, CR0T), RENAULT Clio III Hatchback (BR0/1, CR0/1) 1.6 16V (BR05, BR0B, BR0Y, BR15, BR1J, BR1M, BR1Y, CR0B,..., RENAULT Clio III Hatchback (BR0/1, CR0/1) 1.4 16V, RENAULT Clio III Hatchback (BR0/1, CR0/1) 1.5 dCi (C/BR0G, C/BR1G), RENAULT Clio III Hatchback (BR0/1, CR0/1) 1.5 dCi (BR17, CR17), RENAULT Clio III Hatchback (BR0/1, CR0/1) 1.5 dCi (BR0H, CR0H, CR1S, BR1S), RENAULT Clio III Hatchback (BR0/1, CR0/1) 1.5 dCi (BR1C, CR1C), RENAULT Clio III Hatchback (BR0/1, CR0/1) 2.0 16V (BR0C, BR0K, CR0C, CR0K), RENAULT Clio III Hatchback (BR0/1, CR0/1) 1.2 16V (BR0P, CR0P), RENAULT Clio III Hatchback (BR0/1, CR0/1) 1.2 (BR01, BR03, BR0E, CR0E), RENAULT Clio III Hatchback (BR0/1, CR0/1) 1.5 dCi, RENAULT Clio III Hatchback (BR0/1, CR0/1) 1.2 16V, RENAULT Clio III Hatchback (BR0/1, CR0/1) 1.5 dCi, RENAULT Clio III Hatchback (BR0/1, CR0/1) 1.2 16V Hi-Flex (BR1U, CR1U), RENAULT Clio III Hatchback (BR0/1, CR0/1) 1.5 dCi, RENAULT Clio III Hatchback (BR0/1, CR0/1) 1.6 16V GT (BR10, CR10), RENAULT Clio III Hatchback (BR0/1, CR0/1) 1.5 dCi, RENAULT Clio III Hatchback (BR0/1, CR0/1) 1.2 Ethanol (CR1U, BR1U) … View more
The steps may slightly vary depending on the car design.
How to change front brake discs on RENAULT CLIO 3 [TUTORIAL AUTODOC]

All the parts you need to replace – Brake Discs for Clio III Hatchback (BR0/1, CR0/1) and other RENAULT models
Alternative products

Wire brush
Nylon cleaning brush
WD-40 spray
Brake cleaner
Anti-squeal paste
Copper grease
Torque wrench
Torx bit T30
Combination spanner #13
Combination spanner #19
Drive socket # 13
Drive socket # 18
Wheel impact socket #17
Brake caliper wind back tool
Ratchet wrench
Tap wrench
Crow bar
Fender cover
Wheel chock
Replacement: brake discs – Renault Clio 3. AUTODOC experts recommend:
- Replace the brake disks on the car Renault Clio 3 in complete set for each axis. Regardless of the state of components. This will ensure even braking.
- The replacement procedure is identical for both brake disks on the same axle.
- When changing the brake discs, always replace the brake pads.
- All work should be done with the engine stopped.
Replacement: brake discs – Renault Clio 3. Recommended sequence of steps:
- Step 1
Open the bonnet. - Step 2Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.Step 3
Unscrew the brake fluid reservoir cap. - Step 4
Secure the wheels with chocks. - Step 5
Loosen the wheel mounting bolts. Use wheel impact socket #17. - Step 6
Raise the front of the car and secure on supports. - Step 7
Unscrew the wheel bolts.Replacement: brake discs – Renault Clio 3. Tip:To avoid injury, hold up the wheel when unscrewing the bolts. - Step 8
Remove the wheel. - Step 9
Clean the brake caliper fasteners. Use a wire brush. Use WD-40 spray. - Step 10
Unscrew the brake caliper fastening. Use a combination spanner #13. Use a combination spanner #19. - Step 11
Spread the brake pads. Use a crowbar. - Step 12
Remove the brake caliper.Replacement: brake discs – Renault Clio 3. AUTODOC experts recommend:Tie the caliper to the suspension or to the body with a wire without disconnecting from the brake hose to prevent depressurization of the brake system.Make sure that the brake caliper is not hanging on the brake hose.Don't press the brake pedal after the brake caliper has been removed. As a result, the piston can fall out from the brake cylinder, and brake fluid leakage and depressurization of the system may occur. Check the brake caliper bracket, brake caliper guide pins and boots. Clean them. Replace, if necessary. - Step 13
Remove the brake pads. - Step 14
Clean the brake caliper bracket fasteners. Use a wire brush. Use WD-40 spray. - Step 15
Unscrew the caliper bracket fastening. Use a drive socket #18. Use a tap wrench. - Step 16
Remove the caliper bracket. - Step 17
Clean the brake disc fasteners. Use a wire brush. Use WD-40 spray. - Step 18
Unscrew the brake disc fastening. Use Torx T30. Use a ratchet wrench. - Step 19
Remove the brake disc. - Step 20
Clean the hub. Use a wire brush. Treat the contacting surface. Use copper grease. - Step 21
Install the brake disc. - Step 22
Tighten the brake disc fastening. Use Torx T30. Use a torque wrench. Tighten it to 9 Nm torque. - Step 23
Clean the brake caliper bracket from dirt and dust. Use a wire brush. Use a brake cleaner.AUTODOC recommends:Replacement: brake discs – Renault Clio 3. After applying the spray, wait a few minutes.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the RENAULT Clio III Hatchback (BR0/1, CR0/1) model
Popular maintenance tutorials for Renault Clio 3
Complete guides for changing the Brake rotors on different RENAULT CLIO models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your RENAULT Clio III Hatchback (BR0/1, CR0/1)
View more
What to do if the ABS light comes on: DIY Diagnostics Tips
DIY alternator repair | AUTODOC tips
Why does it burn oil? The main cause of oil consumption in EA888 Gen 1
Top 5 Car Interior Cleaning Mistakes You Should Avoid | AUTODOC Tips
Most commonly replaced car parts on RENAULT CLIO
Time to replace parts? Get even better deals in our Shop app.

SCAN ME

































