Disclaimer
How to change front anti roll bar links on VW Vento (1H2) – replacement guide
downloads:
1
Views:
19
Important!
This replacement procedure can be used for:
VW Vento (1H2) 1.9 D, VW Vento (1H2) 1.9 TD, VW Vento (1H2) 1.9 TDI, VW Vento (1H2) 1.4, VW Vento (1H2) 1.6, VW Vento (1H2) 1.8, VW Vento (1H2) 1.8, VW Vento (1H2) 2.0, VW Vento (1H2) 1.6, VW Vento (1H2) 1.9 TDI, VW Vento (1H2) 1.9 SDI, VW Vento (1H2) 2.0 GL … View more
The steps may slightly vary depending on the car design.
VW Vento (1H2) 1.9 D, VW Vento (1H2) 1.9 TD, VW Vento (1H2) 1.9 TDI, VW Vento (1H2) 1.4, VW Vento (1H2) 1.6, VW Vento (1H2) 1.8, VW Vento (1H2) 1.8, VW Vento (1H2) 2.0, VW Vento (1H2) 1.6, VW Vento (1H2) 1.9 TDI, VW Vento (1H2) 1.9 SDI, VW Vento (1H2) 2.0 GL … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Anti Roll Bar Links for Vento (1H2) and other VW models
Alternative products

Wire brush
WD-40 spray
Copper grease
Drive socket # 13
Drive socket # 19
Wheel impact socket #17
Ratchet wrench
Torque wrench
Crow bar
Wheel chock
AUTODOC recommends:
- Replace the stabiliser links on VW VENTO (1H2) in pairs.
- The replacement procedure is identical for both stabiliser links on the same axle.
- All work should be done with the engine stopped.
Replacement: anti roll bar links – VW VENTO (1H2). Take the following steps:
- Step 1
Secure the wheels with chocks. - Step 2
Loosen the wheel mounting bolts. Use wheel impact socket #17. - Step 3Raise the front of the car and secure on supports.Step 4
Unscrew the wheel bolts.AUTODOC recommends:Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. VW VENTO (1H2) - Step 5
Remove the wheel. - Step 6
Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray. - Step 7
Unscrew the fastener connecting the stabilizer bar with the control arm. Use a drive socket #13. Use a ratchet wrench. - Step 8
Remove the stabilizer rod. Use a crowbar.Replacement: anti roll bar links – VW VENTO (1H2). AUTODOC recommends:Examine stabiliser bushes. Replace them if needed. - Step 9
Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the VW Vento (1H2) model
Popular maintenance tutorials for VW Vento 1h2
Complete guides for changing the Drop links on different VW VENTO models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your VW Vento (1H2)
View more
What to do if your car’s bonnet won’t open | AUTODOC tips
#DIY guide: Changing your car's color with a spray can | AUTODOC tips
How to choose the right engine oil for your car | AUTODOC
How to get your motorcycle ready for spring
Most commonly replaced car parts on VW VENTO
Time to replace parts? Get even better deals in our Shop app.

SCAN ME


























