Important!

This replacement procedure can be used for:
SKODA YETI (5L) 1.2 TSI, SKODA YETI (5L) 1.8 TSI 4x4, SKODA YETI (5L) 2.0 TDI, SKODA YETI (5L) 2.0 TDI 4x4, SKODA YETI (5L) 2.0 TDI 4x4, SKODA YETI (5L) 2.0 TDI 4x4 … View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Anti Roll Bar Links for YETI (5L) and other SKODA models

Alternative products

Anti-roll bar link

Replacement: anti roll bar links – SKODA YETI (5L). Tools you need:

                      Wire brush
                    
                      WD-40 spray
                    
                      Brake cleaner
                    
                      Copper grease
                    
                      Combination spanner #18
                    
                      HEX bit no.H5.
                    
                      XZN socket bit # 6
                    
                      Drive socket # 18
                    
                      Wheel impact socket #17
                    
                      Ratchet wrench
                    
                      Torque wrench
                    
                      Wheel chock

Buy tools

Replacement: anti roll bar links – SKODA YETI (5L). AUTODOC recommends:

Replace the stabiliser links on SKODA YETI (5L) in pairs.
The replacement procedure is identical for both stabiliser links on the same axle.
All work should be done with the engine stopped.

Replacement: anti roll bar links – SKODA YETI (5L). Take the following steps:

Step 1

Secure the wheels with chocks.
Step 2

Loosen the wheel mounting bolts. Use wheel impact socket #17.
Step 3

Raise the front of the car and secure on supports.

Step 4

Unscrew the wheel bolts.

Replacement: anti roll bar links – SKODA YETI (5L). Tip:
To avoid injury, hold up the wheel when unscrewing the bolts.
Step 5

Remove the wheel.
Step 6

Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray.
Step 7

Unscrew the fastener connecting the stabilizer link to the shock strut. Use a drive socket #18. Use a ratchet wrench.
Step 8

Unscrew the fasteners connecting the stabiliser link to the stabiliser bar. Use a combination spanner #18. Use XZN #6. Use a ratchet wrench.
Step 9

Remove the stabilizer rod.

Replacement: anti roll bar links – SKODA YETI (5L). Professionals recommend:
Examine stabiliser bushes. Replace them if needed.
Step 10

Clean the mounting seats of the stabiliser link. Use a wire brush. Use WD-40 spray.
Step 11

Install a new rod, tighten the fasteners. Use a combination spanner #18. Use a drive socket #18. Use HEX No.H5. Use a ratchet wrench.
Step 12

Tighten the fastener connecting the stabilizer link to the shock strut. Use a drive socket #18. Use a torque wrench. Tighten it to 60 Nm torque.
Step 13

Tighten the fastener connecting the stabilizer link to the stabilizer bar. Use a drive socket #18. Use a torque wrench. Tighten it to 60 Nm torque.
Step 14

Treat all joints of the stabiliser link. Use copper grease.
Step 15

Treat the surface where the brake disc contacts the wheel rim. Use copper grease.
Step 16

Clean the brake disk surface. Use a brake cleaner.

AUTODOC recommends:
Replacement: anti roll bar links – SKODA YETI (5L). After applying the spray, wait a few minutes.
Step 17

Install the wheel.

Replacement: anti roll bar links – SKODA YETI (5L). AUTODOC experts recommend:
To avoid injury, hold up the wheel when screwing in the fastening bolts.
Step 18

Screw in the wheel bolts. Use wheel impact socket #17.
Step 19

Lower the car and working in a cross order, tighten the wheel bolts. Use wheel impact socket #17. Use a torque wrench. Tighten it to 120 Nm torque.
Step 20

Remove the jacks and chocks.

Was this manual helpful?

Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.

Need New Tyres?

Find out which tyre and wheel sizes are compatible with the SKODA Yeti (5L) model

Skoda Yeti 5L tyre size

How to change rear strut mount on SKODA YETI (5L) – replacement guide

Free download PDF
1.68 MB
How to change rear suspension lower trailing arm on SKODA YETI (5L) – replacement guide

Free download PDF
1.66 MB
How to change front lower arm on SKODA YETI (5L) – replacement guide

Free download PDF
2.1 MB
How to change rear suspension lower control arm on SKODA YETI (5L) – replacement guide

Free download PDF
1.62 MB
How to change front strut mount on SKODA YETI (5L) – replacement guide

Free download PDF
3.87 MB
How to change track rod end on SKODA YETI (5L) – replacement guide

Free download PDF
1.39 MB

How to change rear anti roll bar links on SKODA YETI (5L) – replacement guide

Free download PDF
1.41 MB
How to change anti roll bar links on a car – replacement tutorial

Universal

Free download PDF
972.8 KB
How to change front anti roll bar links on Skoda Octavia 1Z5 – replacement guide

Free download PDF
1.3 MB
How to change rear anti roll bar links on Skoda Octavia 1Z5 – replacement guide

Free download PDF
1.38 MB
How to change front anti roll bar links on Skoda Fabia 6Y5 – replacement guide

Free download PDF
1.41 MB
How to change front anti roll bar links on SKODA SUPERB (3U4) – replacement guide

Free download PDF
1.19 MB

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

How to fix your car with AUTODOC CLUB

17K views

Published on: 30/11/2021
Top 5 reasons why your car squeals | AUTODOC Tips

9K views

Published on: 26/10/2023
Don’t Replace, Restore: Fixing Damaged Threads at Home

8K views

Published on: 04/05/2023
DIY starter repair | AUTODOC tips

131K views

Published on: 31/08/2023