Disclaimer
How to change front anti roll bar links on SKODA Octavia I Combi (1U5) – replacement guide
downloads:
2
Views:
15
Important!
This replacement procedure can be used for:
SKODA Octavia I Combi (1U5) 1.6, SKODA Octavia I Combi (1U5) 1.8 20V, SKODA Octavia I Combi (1U5) 1.9 SDI, SKODA Octavia I Combi (1U5) 1.9 TDI, SKODA Octavia I Combi (1U5) 1.9 TDI, SKODA Octavia I Combi (1U5) 1.8 T, SKODA Octavia I Combi (1U5) 1.6, SKODA Octavia I Combi (1U5) 1.9 TDI 4x4, SKODA Octavia I Combi (1U5) 2.0, SKODA Octavia I Combi (1U5) 1.9 TDI 4x4, SKODA Octavia I Combi (1U5) 1.4 16V, SKODA Octavia I Combi (1U5) 1.6, SKODA Octavia I Combi (1U5) 1.8 T 4x4, SKODA Octavia I Combi (1U5) 2.0 4x4, SKODA Octavia I Combi (1U5) RS 1.8 T, SKODA Octavia I Combi (1U5) 1.9 TDI, SKODA Octavia I Combi (1U5) 1.9 TDI … View more
The steps may slightly vary depending on the car design.
SKODA Octavia I Combi (1U5) 1.6, SKODA Octavia I Combi (1U5) 1.8 20V, SKODA Octavia I Combi (1U5) 1.9 SDI, SKODA Octavia I Combi (1U5) 1.9 TDI, SKODA Octavia I Combi (1U5) 1.9 TDI, SKODA Octavia I Combi (1U5) 1.8 T, SKODA Octavia I Combi (1U5) 1.6, SKODA Octavia I Combi (1U5) 1.9 TDI 4x4, SKODA Octavia I Combi (1U5) 2.0, SKODA Octavia I Combi (1U5) 1.9 TDI 4x4, SKODA Octavia I Combi (1U5) 1.4 16V, SKODA Octavia I Combi (1U5) 1.6, SKODA Octavia I Combi (1U5) 1.8 T 4x4, SKODA Octavia I Combi (1U5) 2.0 4x4, SKODA Octavia I Combi (1U5) RS 1.8 T, SKODA Octavia I Combi (1U5) 1.9 TDI, SKODA Octavia I Combi (1U5) 1.9 TDI … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Anti Roll Bar Links for Octavia I Combi (1U5) and other SKODA models
Alternative products

Wire brush
WD-40 spray
Combination spanner #16
Drive socket # 16
Torque wrench
AUTODOC recommends:
- Replace the stabiliser links on SKODA OCTAVIA Combi (1U5) in pairs.
- The replacement procedure is identical for both stabiliser links on the same axle.
- All work should be done with the engine stopped.
Replacement: anti roll bar links – SKODA OCTAVIA Combi (1U5). Use the following procedure:
- Step 1Raise the front of the car and secure on supports.Step 2
Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray. - Step 3
Unscrew the fasteners connecting the stabiliser link to the stabiliser bar and to the suspension control arm. Use a combination spanner #16. Use a torque wrench. - Step 4
Remove the stabilizer rod.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the SKODA Octavia I Combi (1U5) model
Popular maintenance tutorials for Skoda Octavia 1u5
Complete guides for changing the Drop links on different SKODA OCTAVIA models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your SKODA Octavia I Combi (1U5)
View more
5 signs of a faulty strut mount and how to fix it
DIY alternator repair | AUTODOC tips
Unveiling the secrets: Detecting vacuum leaks with a Smoke Machine | AUTODOC
What to do if the ABS light comes on: DIY Diagnostics Tips
Most commonly replaced car parts on SKODA OCTAVIA
Time to replace parts? Get even better deals in our Shop app.

SCAN ME





















