Disclaimer
How to change front anti roll bar links on SKODA E-CITIGO (NE1) – replacement guide
downloads:
0
Views:
16
Important!
This replacement procedure can be used for:
SKODA E-CITIGO (NE1) e iV … View more
The steps may slightly vary depending on the car design.
SKODA E-CITIGO (NE1) e iV … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Anti Roll Bar Links for E-CITIGO (NE1) and other SKODA models
Alternative products

Wire brush
WD-40 spray
Brake cleaner
Copper grease
Drive socket # 16
Combination spanner #16
Torx bit T30
Wheel impact socket #17
Ratchet wrench
Torque wrench
Crow bar
Wheel chock
AUTODOC recommends:
- Replace the stabiliser links on SKODA E-CITIGO (NE1) in pairs.
- The replacement procedure is identical for both stabiliser links on the same axle.
- All work should be done with the engine stopped.
Replacement: anti roll bar links – SKODA E-CITIGO (NE1). Recommended sequence of steps:
- Step 1
Secure the wheels with chocks. - Step 2
Loosen the wheel mounting bolts. Use wheel impact socket #17. - Step 3Raise the front of the car and secure on supports.Step 4
Unscrew the wheel bolts.AUTODOC recommends:Important! Hold the wheel while unscrewing the fastening bolts. SKODA E-CITIGO (NE1) - Step 5
Remove the wheel. - Step 6Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray.Step 7
Unscrew the fastener connecting the stabilizer link to the shock strut. Use a drive socket #16. Use a ratchet wrench. - Step 8
Unscrew the fastener connecting the stabilizer link to the stabilizer bar. Use a combination spanner #16. Use Torx T30. Use a ratchet wrench. - Step 9
Remove the stabilizer rod. Use a crowbar.Replacement: anti roll bar links – SKODA E-CITIGO (NE1). AUTODOC experts recommend:Examine stabiliser bushes. Replace them if needed. - Step 10
Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray. - Step 11
Install a new rod, tighten the fasteners. Use a combination spanner #16. Use a drive socket #16. Use Torx T30. Use a ratchet wrench.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the SKODA Citigo-e iV (NE1) model
Popular maintenance tutorials for SKODA E-CITIGO (NE1)
Complete guides for changing the Drop links on different SKODA CITIGO models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your SKODA E-CITIGO (NE1)
View more
Top 5 reasons why the suspension knocks | AUTODOC tips
Checking the starter without removing it | AUTODOC tips
Can You Hear Your Brakes Squeaking? Learn the Causes and DIY Solutions! | AUTODOC Tips
TOP 6 WD-40 lifehacks | AUTODOC tips
Most commonly replaced car parts on SKODA CITIGO
Time to replace parts? Get even better deals in our Shop app.

SCAN ME




























