Disclaimer
How to change front anti roll bar links on RENAULT Zoe (BFM_) – replacement guide
downloads:
25
Views:
236
Important!
This replacement procedure can be used for:
RENAULT Zoe (BFM_) ZOE, RENAULT Zoe (BFM_) ZOE, RENAULT Zoe (BFM_) ZOE (BFMD), RENAULT Zoe (BFM_) Electric (BFME), RENAULT Zoe (BFM_) ZOE (BFMC, BFMD) … View more
The steps may slightly vary depending on the car design.
RENAULT Zoe (BFM_) ZOE, RENAULT Zoe (BFM_) ZOE, RENAULT Zoe (BFM_) ZOE (BFMD), RENAULT Zoe (BFM_) Electric (BFME), RENAULT Zoe (BFM_) ZOE (BFMC, BFMD) … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Anti Roll Bar Links for Zoe (BFM_) and other RENAULT models
Alternative products
Anti-roll bar link
Wire brush
WD-40 spray
All-purpose cleaning spray
Ceramic grease
Torque wrench
Combination spanner #17
Drive socket # 17
HEX bit no.H5.
Wheel impact socket #17
Ratchet wrench
Tap wrench
Wheel chock
AUTODOC recommends:
- Replace the stabiliser links on RENAULT ZOE in pairs.
- The replacement procedure is identical for both stabiliser links on the same axle.
- All work should be done with the engine stopped.
Replacement: anti roll bar links – RENAULT ZOE. Take the following steps:
- Step 1Secure the wheels with chocks.Step 2
Loosen the wheel bolts. Use wheel impact socket #17. Use a tap wrench. - Step 3Raise the car.Replacement: anti roll bar links – RENAULT ZOE. AUTODOC recommends:If you are using a jack, make sure it rests on a flat surface without any unevenness.Be sure to additionally secure the car with jack stands.Step 4
Unscrew the wheel bolts.AUTODOC recommends:To avoid injury, hold up the wheel when unscrewing the bolts. - Step 5
Remove the wheel. - Step 6
Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray. - Step 7
Unscrew the fastener connecting the stabilizer link to the shock strut. Use a combination spanner #17. Use HEX No.H5. Use a ratchet wrench. - Step 8
Unscrew the fastener connecting the stabilizer link to the stabilizer bar. Use a combination spanner #17. Use HEX No.H5. Use a ratchet wrench. - Step 9
Remove the stabiliser link. - Step 10
Clean the mounting seats of the stabiliser link. Use a wire brush. Use all-purpose cleaning spray. - Step 11
Install a new stabiliser link and tighten the fasteners.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the RENAULT Zoe (BFM_) model
Popular maintenance tutorials for RENAULT ZOE
Free download PDF
3.2 MB
Free download PDF1.37 MB
Free download PDF512 KB
Free download PDF5.68 MB
Free download PDF1.66 MB
Free download PDF1.84 MB
Complete guides for changing the Drop links on different RENAULT ZOE models
Free download PDF972.8 KB
Free download PDF2 MB
Free download PDF2.12 MB
Free download PDF1.06 MB
Free download PDF1.43 MB
Free download PDF1.94 MB
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your RENAULT Zoe (BFM_)
View more
What to do if the ABS light comes on: DIY Diagnostics Tips
Prevent Engine Damage: How to Identify Rocker Cover Gasket Issues and Proper Replacement | AUTODOC
How to Order Car Parts Online: Avoid These 5 Common Pitfalls
Can You Hear Your Brakes Squeaking? Learn the Causes and DIY Solutions! | AUTODOC Tips
Most commonly replaced car parts on RENAULT ZOE
Time to replace parts? Get even better deals in our Shop app.
SCAN ME