Disclaimer
How to change front anti roll bar links on RENAULT Laguna II Hatchback (BG) – replacement guide
downloads:
1
Views:
23
Important!
This replacement procedure can be used for:
RENAULT LAGUNA II (BG0/1_) 1.6 16V (BG0A, BG0L), RENAULT LAGUNA II (BG0/1_) 1.8 16V (BG0B, BG0C, BG0J, BG0M, BG0V), RENAULT LAGUNA II (BG0/1_) 3.0 V6 24V (BG01, BG02, BG0D, BG0Y), RENAULT LAGUNA II (BG0/1_) 1.9 dCi (BG08, BG0G), RENAULT LAGUNA II (BG0/1_) 2.0 16V IDE (BG0N), RENAULT LAGUNA II (BG0/1_) 1.9 dCI (BG0E), RENAULT LAGUNA II (BG0/1_) 2.2 dCi (BG0F), RENAULT LAGUNA II (BG0/1_) 1.8 16V (BG0B, BG0M), RENAULT LAGUNA II (BG0/1_) 1.8 16V (BG06, BG0J, BG0M), RENAULT LAGUNA II (BG0/1_) 1.9 dCi (BG0R, BG0E), RENAULT LAGUNA II (BG0/1_) 2.0 16V (BG00, BG0K, BG0P, BG0W), RENAULT LAGUNA II (BG0/1_) 2.0 16V Turbo (BG0S, BG1L, BG1M), RENAULT LAGUNA II (BG0/1_) 1.9 dCi (BG05), RENAULT LAGUNA II (BG0/1_) 2.0 16V (BG03, BG0Z, BG0T, BG1Y), RENAULT LAGUNA II (BG0/1_) 2.0 16V (BG1Y), RENAULT LAGUNA II (BG0/1_) 1.9 dCi (BG1A, BG1W, BG0G), RENAULT LAGUNA II (BG0/1_) 1.9 dCi (BG1A, BG1V), RENAULT LAGUNA II (BG0/1_) 2.2 dCi, RENAULT LAGUNA II (BG0/1_) 1.6 16V (BG1G, BG1H), RENAULT LAGUNA II (BG0/1_) 2.0 dCi (BG1T), RENAULT LAGUNA II (BG0/1_) 2.0 dCi (BG14, BG1S), RENAULT LAGUNA II (BG0/1_) 2.2 dCi (BG09), RENAULT LAGUNA II (BG0/1_) 1.9 dCi, RENAULT LAGUNA II (BG0/1_) 1.8 16V (BG04, BG0B, BG0C, BG0V), RENAULT LAGUNA II (BG0/1_) 1.9 dCi, RENAULT LAGUNA II (BG0/1_) 1.9 dCi (BG12), RENAULT LAGUNA II (BG0/1_) 2.0 16V (BG00, BG0W, BG0K, BG0P), RENAULT LAGUNA II (BG0/1_) 1.6 LPG, RENAULT LAGUNA II (BG0/1_) 2.9 V6 24V … View more
The steps may slightly vary depending on the car design.
RENAULT LAGUNA II (BG0/1_) 1.6 16V (BG0A, BG0L), RENAULT LAGUNA II (BG0/1_) 1.8 16V (BG0B, BG0C, BG0J, BG0M, BG0V), RENAULT LAGUNA II (BG0/1_) 3.0 V6 24V (BG01, BG02, BG0D, BG0Y), RENAULT LAGUNA II (BG0/1_) 1.9 dCi (BG08, BG0G), RENAULT LAGUNA II (BG0/1_) 2.0 16V IDE (BG0N), RENAULT LAGUNA II (BG0/1_) 1.9 dCI (BG0E), RENAULT LAGUNA II (BG0/1_) 2.2 dCi (BG0F), RENAULT LAGUNA II (BG0/1_) 1.8 16V (BG0B, BG0M), RENAULT LAGUNA II (BG0/1_) 1.8 16V (BG06, BG0J, BG0M), RENAULT LAGUNA II (BG0/1_) 1.9 dCi (BG0R, BG0E), RENAULT LAGUNA II (BG0/1_) 2.0 16V (BG00, BG0K, BG0P, BG0W), RENAULT LAGUNA II (BG0/1_) 2.0 16V Turbo (BG0S, BG1L, BG1M), RENAULT LAGUNA II (BG0/1_) 1.9 dCi (BG05), RENAULT LAGUNA II (BG0/1_) 2.0 16V (BG03, BG0Z, BG0T, BG1Y), RENAULT LAGUNA II (BG0/1_) 2.0 16V (BG1Y), RENAULT LAGUNA II (BG0/1_) 1.9 dCi (BG1A, BG1W, BG0G), RENAULT LAGUNA II (BG0/1_) 1.9 dCi (BG1A, BG1V), RENAULT LAGUNA II (BG0/1_) 2.2 dCi, RENAULT LAGUNA II (BG0/1_) 1.6 16V (BG1G, BG1H), RENAULT LAGUNA II (BG0/1_) 2.0 dCi (BG1T), RENAULT LAGUNA II (BG0/1_) 2.0 dCi (BG14, BG1S), RENAULT LAGUNA II (BG0/1_) 2.2 dCi (BG09), RENAULT LAGUNA II (BG0/1_) 1.9 dCi, RENAULT LAGUNA II (BG0/1_) 1.8 16V (BG04, BG0B, BG0C, BG0V), RENAULT LAGUNA II (BG0/1_) 1.9 dCi, RENAULT LAGUNA II (BG0/1_) 1.9 dCi (BG12), RENAULT LAGUNA II (BG0/1_) 2.0 16V (BG00, BG0W, BG0K, BG0P), RENAULT LAGUNA II (BG0/1_) 1.6 LPG, RENAULT LAGUNA II (BG0/1_) 2.9 V6 24V … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Anti Roll Bar Links for LAGUNA II (BG0/1_) and other RENAULT models
Alternative products

Wire brush
WD-40 spray
Brake cleaner
Copper grease
Torque wrench
Combination spanner #16
Drive socket # 16
Drive socket # 17
HEX bit No.H6.
Wheel impact socket #17
Ratchet wrench
Wheel chock
Replacement: anti roll bar links – RENAULT LAGUNA II (BG0/1_). Tip from AUTODOC:
- Replace the stabiliser links on RENAULT LAGUNA II (BG0/1_) in pairs.
- The replacement procedure is identical for both stabiliser links on the same axle.
- Warning! Shut down the engine before starting any work – RENAULT LAGUNA II (BG0/1_)
Carry out replacement in the following order:
- Step 1
Secure the wheels with chocks. - Step 2
Loosen the wheel mounting bolts. Use wheel impact socket #17. - Step 3Raise the front of the car and secure on supports.Step 4
Unscrew the wheel bolts.AUTODOC recommends:Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. RENAULT LAGUNA II (BG0/1_) - Step 5
Remove the wheel. - Step 6
Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray. - Step 7
Unscrew the fastener connecting the stabilizer link to the stabilizer bar. Use a combination spanner #16. Use HEX No.H6. Use a ratchet wrench. - Step 8
Unscrew the fastener connecting the stabilizer link to the shock strut. Use a drive socket #16. Use a ratchet wrench. - Step 9
Remove the stabilizer rod.Replacement: anti roll bar links – RENAULT LAGUNA II (BG0/1_). Tip:Examine stabiliser bushes. Replace them if needed. - Step 10
Clean the mounting seats of the stabiliser link. Use a wire brush. Use WD-40 spray. - Step 11
Ιnstall the transverse stabilizer link.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the RENAULT Laguna II Hatchback (BG) model
Popular maintenance tutorials for Renault Laguna 2
Complete guides for changing the Drop links on different RENAULT LAGUNA models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your RENAULT LAGUNA II (BG0/1_)
View more
How to Swap an M50 Engine in a BMW E30 Turbo | AUTODOC Project
Top 5 Car Interior Cleaning Mistakes You Should Avoid | AUTODOC Tips
Kolbenschmidt plastic gauge overview
Motorcycle fuel tank restoration
Most commonly replaced car parts on RENAULT LAGUNA
Time to replace parts? Get even better deals in our Shop app.

SCAN ME
























