Disclaimer
How to change front anti roll bar links on PEUGEOT Partner II Platform / Chassis – replacement guide
downloads:
1
Views:
9
Important!
This replacement procedure can be used for:
PEUGEOT PARTNER Platform/Chassis 1.6 BlueHDi, PEUGEOT PARTNER Platform/Chassis 1.6 HDi, PEUGEOT PARTNER Platform/Chassis 1.6 HDi 16V, PEUGEOT PARTNER Platform/Chassis 1.6 HDi … View more
The steps may slightly vary depending on the car design.
PEUGEOT PARTNER Platform/Chassis 1.6 BlueHDi, PEUGEOT PARTNER Platform/Chassis 1.6 HDi, PEUGEOT PARTNER Platform/Chassis 1.6 HDi 16V, PEUGEOT PARTNER Platform/Chassis 1.6 HDi … View more
The steps may slightly vary depending on the car design.
All the parts you need to replace – Anti Roll Bar Links for PARTNER Platform/Chassis and other PEUGEOT models
Alternative products
Anti-roll bar link
Wire brush
WD-40 spray
Brake cleaner
Copper grease
Combination spanner #16
Drive socket # 15
Drive socket # 17
Wheel impact socket #17
Ratchet wrench
Wheel chock
Replacement: anti roll bar links – PEUGEOT PARTNER Platform/Chassis. AUTODOC experts recommend:
- Replace the stabiliser links on PEUGEOT PARTNER Platform/Chassis in pairs.
- The replacement procedure is identical for both stabiliser links on the same axle.
- All work should be done with the engine stopped.
Replacement: anti roll bar links – PEUGEOT PARTNER Platform/Chassis. Recommended sequence of steps:
- Step 1Secure the wheels with chocks.Step 2
Loosen the wheel mounting bolts. Use wheel impact socket #17. - Step 3Raise the front of the car and secure on supports.Step 4
Unscrew the wheel bolts.Replacement: anti roll bar links – PEUGEOT PARTNER Platform/Chassis. AUTODOC recommends:To avoid injury, hold up the wheel when unscrewing the bolts. - Step 5
Remove the wheel. - Step 6
Remove the ABS wiring harness bracket. - Step 7
Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray. - Step 8
Unscrew the fastener connecting the stabilizer link to the shock strut. Use a drive socket #15. Use a ratchet wrench. - Step 9
Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray. - Step 10
Unscrew the fastener connecting the stabilizer link to the stabilizer bar. Use a combination spanner #16. Use a drive socket #15. Use a ratchet wrench. - Step 11
Remove the stabilizer rod.Replacement: anti roll bar links – PEUGEOT PARTNER Platform/Chassis. Tip from AUTODOC experts:Examine stabiliser bushes. Replace them if needed. - Step 12
Clean the mounting seats of the stabiliser link. Use a wire brush. Use WD-40 spray. - Step 13
Install a new rod, tighten the fasteners.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the PEUGEOT Partner II Platform / Chassis model
Popular maintenance tutorials for PEUGEOT PARTNER Platform/Chassis
Free download PDF
1.93 MB
Free download PDF5.98 MB
Free download PDF2.46 MB
Free download PDF2.84 MB
Free download PDF686.08 KB
Free download PDF1.41 MB
Complete guides for changing the Drop links on different PEUGEOT PARTNER models
Free download PDF1.33 MB
Free download PDF1.33 MB
Free download PDF1.1 MB
Free download PDF1.32 MB
Free download PDF1.33 MB
Free download PDF1.33 MB
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your PEUGEOT PARTNER Platform/Chassis
View more
What to do if your check engine light is on | AUTODOC tips
How to Make a DIY Foam Sprayer | AUTODOC tips
Reviving Your Car: How to Start After Extended Idle Time | AUTODOC Tips
TOP 5 mistakes when replacing shock absorbers | AUTODOC tips
Most commonly replaced car parts on PEUGEOT PARTNER
Time to replace parts? Get even better deals in our Shop app.
SCAN ME