Important!

This replacement procedure can be used for:
PEUGEOT 3008 Off-Road (M_) 2.0 BlueHDi 180, PEUGEOT 3008 Off-Road (M_) 1.6 BlueHDi 120, PEUGEOT 3008 Off-Road (M_) 2.0 BlueHDi 150 (MJAHXH, MJAHXV, MJAHXG, MJAHSH, MJAHRH,..., PEUGEOT 3008 Off-Road (M_) 1.6 THP 165 (M45GYW, M45GZW, M45GYV), PEUGEOT 3008 Off-Road (M_) 1.2 THP/ PureTech 130 (MRHNSM, MRHNSU, MRHNSJ, MRHNYW,..., PEUGEOT 3008 Off-Road (M_) 1.6 BlueHDi 100, PEUGEOT 3008 Off-Road (M_) 1.6 BlueHDi 115 (MCBHXW, MCBHYB), PEUGEOT 3008 Off-Road (M_) 2.0 BlueHDi 136, PEUGEOT 3008 Off-Road (M_) 2.0 BlueHDi 180, PEUGEOT 3008 Off-Road (M_) 1.5 BlueHDi 130, PEUGEOT 3008 Off-Road (M_) 1.6 PureTech 180 (M45GFR, M45GFU), PEUGEOT 3008 Off-Road (M_) Hybrid, PEUGEOT 3008 Off-Road (M_) Hybrid4 (M45GBU), PEUGEOT 3008 Off-Road (M_) Hybrid4 (M45GBU), PEUGEOT 3008 Off-Road (M_) Hybrid … View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Anti Roll Bar Links for 3008 Off-Road (M_) and other PEUGEOT models

Anti-roll bar link

        Anti-roll bar link for 3008 II Off-Road (M_) Diesel (181 hp)
      
        Anti-roll bar link for 3008 II Off-Road (M_) Diesel (120 hp)
      
        Anti-roll bar link for 3008 II Off-Road (M_) Diesel (150 hp)
      
        Anti-roll bar link for 3008 II Off-Road (M_) Petrol (165 hp)
      
        Anti-roll bar link for 3008 II Off-Road (M_) Petrol (131 hp)
      
        Anti-roll bar link for 3008 II Off-Road (M_) Diesel (100 hp)
      
        Anti-roll bar link for 3008 II Off-Road (M_) Diesel (116 hp)
      
        Anti-roll bar link for 3008 II Off-Road (M_) Diesel (136 hp)
      
        Anti-roll bar link for 3008 II Off-Road (M_) Diesel (177 hp)

Replacement: anti roll bar links – PEUGEOT 3008 SUV. Tools you need:

                        Wire brush
                      
                        WD-40 spray
                      
                        Brake cleaner 
                      
                        Copper grease 
                      
                        Combination spanner #16
                      
                        Drive socket # 15 
                      
                        Drive socket # 17 
                      
                        Wheel impact socket #17
                      
                        Ratchet wrench
                      
                        Wheel chock

Buy tools

Replacement: anti roll bar links – PEUGEOT 3008 SUV. AUTODOC experts recommend:

Replace the stabiliser links on PEUGEOT 3008 SUV in pairs.
The replacement procedure is identical for both stabiliser links on the same axle.
All work should be done with the engine stopped.

Replacement: anti roll bar links – PEUGEOT 3008 SUV. Recommended sequence of steps:

Step 1

Secure the wheels with chocks.

Step 2

Loosen the wheel mounting bolts. Use wheel impact socket #17.
Step 3

Raise the front of the car and secure on supports.

Step 4

Unscrew the wheel bolts.

Replacement: anti roll bar links – PEUGEOT 3008 SUV. AUTODOC recommends:
To avoid injury, hold up the wheel when unscrewing the bolts.
Step 5

Remove the wheel.
Step 6

Remove the ABS wiring harness bracket.
Step 7

Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray.
Step 8

Unscrew the fastener connecting the stabilizer link to the shock strut. Use a drive socket #15. Use a ratchet wrench.
Step 9

Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray.
Step 10

Unscrew the fastener connecting the stabilizer link to the stabilizer bar. Use a combination spanner #16. Use a drive socket #15. Use a ratchet wrench.
Step 11

Remove the stabilizer rod.

Replacement: anti roll bar links – PEUGEOT 3008 SUV. Tip from AUTODOC experts:
Examine stabiliser bushes. Replace them if needed.
Step 12

Clean the mounting seats of the stabiliser link. Use a wire brush. Use WD-40 spray.
Step 13

Install a new rod, tighten the fasteners.
Step 14

Tighten the fastener connecting the stabilizer link to the stabilizer bar. Use a drive socket #17. Use a torque wrench. Tighten it to 36 Nm torque.
Step 15

Tighten the fastener connecting the stabilizer link to the shock strut. Use a drive socket #17. Use a torque wrench. Tighten it to 36 Nm torque.
Step 16

Treat all joints of the stabiliser link. Use copper grease.
Step 17

Install the ABS wiring harness bracket.
Step 18

Treat the surface where the brake disc contacts the wheel rim. Use copper grease.
Step 19

Clean the brake disk surface. Use a brake cleaner.

AUTODOC recommends:
Replacement: anti roll bar links – PEUGEOT 3008 SUV. After applying the spray, wait a few minutes.
Step 20

Install the wheel.

Replacement: anti roll bar links – PEUGEOT 3008 SUV. Tip from AUTODOC:
To avoid injury, hold up the wheel when screwing in the fastening bolts.
Step 21

Screw in the wheel bolts. Use wheel impact socket #17.
Step 22

Lower the car and working in a cross order, tighten the wheel bolts. Use wheel impact socket #17. Use a torque wrench. Tighten it to 100 nm torque.
Step 23

Remove the jacks and chocks.

Was this manual helpful?

Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.

Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the PEUGEOT 3008 II Off-Road (M_) model.

Peugeot 3008 SUV tyre size

How to change engine oil and filter on PEUGEOT 3008 II Off-Road (M_) – replacement guide

Free download PDF
3.11 MB
How to change fuel filter on PEUGEOT 3008 II Off-Road (M_) – replacement guide

Free download PDF
942.08 KB
How to change ignition coil on PEUGEOT 3008 II Off-Road (M_) – replacement guide

Free download PDF
1.71 MB
How to change water pump & timing belt kit on Peugeot 307 SW – replacement guide

Free download PDF
7.01 MB
How to change serpentine belt on Peugeot 207 hatchback – replacement guide

Free download PDF
1.63 MB
How to change engine oil and filter on Peugeot 308 I – replacement guide

Free download PDF
3.3 MB

How to change front anti roll bar links on PEUGEOT 3008 I (0U_) – replacement guide

Free download PDF
1.33 MB
How to change front anti roll bar links on PEUGEOT 3008 (T8) – replacement guide

Free download PDF
1.33 MB
How to change anti roll bar links on a car – replacement tutorial

Universal

Free download PDF
972.8 KB
How to change front anti roll bar links on Peugeot 206 CC 2D – replacement guide

Free download PDF
1.32 MB
How to change front anti roll bar links on Peugeot 307 SW – replacement guide

Free download PDF
1.33 MB
How to change front anti roll bar links on Peugeot 407 saloon – replacement guide

Free download PDF
1.54 MB

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!

Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.

Scan

To download the app:

- scan the QR code
- download from App Store
- download from Google Play

How to repair a chipped or cracked windscreen | AUTODOC tips

7K views

Published on: 14/12/2023
What to do if the airbag light is on | AUTODOC tips

5K views

Published on: 10/04/2023
What causes engine misfire? | AUTODOC

5K views

Published on: 10/07/2020
DIY alternator repair | AUTODOC tips

1M views

Published on: 30/11/2022