Disclaimer
How to change front anti roll bar links on OPEL Ampera (R12) – replacement guide
downloads:
1
Views:
24
Important!
This replacement procedure can be used for:
OPEL Ampera (R12) EV 150 … View more
The steps may slightly vary depending on the car design.
OPEL Ampera (R12) EV 150 … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Anti Roll Bar Links for Ampera (R12) and other OPEL models
Alternative products

Wire brush
WD-40 spray
Brake cleaner
Copper grease
Combination spanner #18
Combination spanner #19
Drive socket # 18
Drive socket # 19
Wheel impact socket #19
Ratchet wrench
Torque wrench
Wheel chock
Replacement: anti roll bar links – OPEL AMPERA. AUTODOC recommends:
- Replace the stabiliser links on OPEL AMPERA in pairs.
- The replacement procedure is identical for both stabiliser links on the same axle.
- All work should be done with the engine stopped.
Replacement: anti roll bar links – OPEL AMPERA. Use the following procedure:
- Step 1
Secure the wheels with chocks. - Step 2
Loosen the wheel mounting bolts. Use wheel impact socket #19. - Step 3Raise the front of the car and secure on supports.Step 4
Unscrew the wheel bolts.AUTODOC recommends:Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. OPEL AMPERA - Step 5
Remove the wheel. - Step 6
Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray. - Step 7
Unscrew the fastener connecting the stabilizer link to the shock strut. Use a combination spanner #19. Use a drive socket #19. Use a ratchet wrench. - Step 8
Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray. - Step 9
Unscrew the fastener connecting the stabilizer link to the stabilizer bar. Use a combination spanner #19 (2 pieces). - Step 10
Remove the stabilizer rod.Replacement: anti roll bar links – OPEL AMPERA. AUTODOC experts recommend:Examine stabiliser bushes. Replace them if needed. - Step 11
Clean the mounting seats of the stabiliser link. Use a wire brush. Use WD-40 spray. - Step 12
Ιnstall the transverse stabilizer link. - Step 13
Tighten the stabiliser link fastener. Use a combination spanner #18.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the OPEL Ampera (R12) model
Popular maintenance tutorials for OPEL AMPERA
Complete guides for changing the Drop links on different OPEL AMPERA models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your OPEL Ampera (R12)
View more
5 most common causes of oil leaks | AUTODOC tips
How to clean the engine bay perfectly
How to Use Sandblasting Equipment: Step-by-Step Guide | AUTODOC Tips
Cold starts | 5 mistakes that wreck your car
Most commonly replaced car parts on OPEL AMPERA
Time to replace parts? Get even better deals in our Shop app.

SCAN ME





















