Important!

This replacement procedure can be used for:
CITROËN C3 III Box Body / Hatchback (SX, SY) BlueHDi, CITROËN C3 III Box Body / Hatchback (SX, SY) BlueHDi, CITROËN C3 III Box Body / Hatchback (SX, SY) BlueHDi, CITROËN C3 III Box Body / Hatchback (SX, SY) PureTech, CITROËN C3 III Box Body / Hatchback (SX, SY) PureTech … View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

Alternative products

Anti-roll bar link

Replacement: anti roll bar links – CITROËN C3 III Kasten / Schrägheck (SX, SY). Tools you might need:

                      Wire brush
                    
                      WD-40 spray
                    
                      Brake cleaner 
                    
                      Copper grease 
                    
                      Torx bit T30
                    
                      Drive socket # 17 
                    
                      Combination spanner #17
                    
                      Wheel impact socket #17
                    
                      Ratchet wrench
                    
                      Torque wrench
                    
                      Wheel chock

Buy tools

AUTODOC recommends:

Replace the stabiliser links on CITROËN C3 III Kasten / Schrägheck (SX, SY) in pairs.
The replacement procedure is identical for both stabiliser links on the same axle.
All work should be done with the engine stopped.

Replacement: anti roll bar links – CITROËN C3 III Kasten / Schrägheck (SX, SY). Recommended sequence of steps:

Step 1

Secure the wheels with chocks.
Step 2

Loosen the wheel mounting bolts. Use wheel impact socket #17.
Step 3

Raise the front of the car and secure on supports.

Step 4

Unscrew the wheel bolts.

AUTODOC recommends:
Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. CITROËN C3 III Kasten / Schrägheck (SX, SY)
Step 5

Remove the wheel.
Step 6

Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray.
Step 7

Unscrew the fastener connecting the stabilizer link to the shock strut. Use a combination spanner #17. Use Torx T30. Use a ratchet wrench.
Step 8

Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray.
Step 9

Unscrew the fastener connecting the stabilizer link to the stabilizer bar. Use a combination spanner #17. Use Torx T30. Use a ratchet wrench.
Step 10

Remove the stabilizer rod.

Replacement: anti roll bar links – CITROËN C3 III Kasten / Schrägheck (SX, SY). Tip from AUTODOC experts:
Examine stabiliser bushes. Replace them if needed.
Step 11

Clean the mounting seats of the stabiliser link. Use a wire brush. Use WD-40 spray.
Step 12

Install a new rod, tighten the fasteners.
Step 13

Tighten the fastener connecting the stabilizer link to the stabilizer bar. Use a drive socket #17. Use a torque wrench. Tighten it to 35 Nm torque.
Step 14

Tighten the fastener connecting the stabilizer link to the shock strut. Use a drive socket #17. Use a torque wrench. Tighten it to 35 Nm torque.
Step 15

Treat all joints of the stabiliser link. Use copper grease.
Step 16

Treat the surface where the brake disc contacts the wheel rim. Use copper grease.
Step 17

Clean the brake disk surface. Use a brake cleaner.

AUTODOC recommends:
Replacement: anti roll bar links – CITROËN C3 III Kasten / Schrägheck (SX, SY). After applying the spray, wait a few minutes.
Step 18

Install the wheel.

AUTODOC recommends:
Important! Hold the wheel while screwing in the fastening bolts. CITROËN C3 III Kasten / Schrägheck (SX, SY)
Step 19

Screw in the wheel bolts. Use wheel impact socket #17.
Step 20

Lower the car and working in a cross order, tighten the wheel bolts. Use wheel impact socket #17. Use a torque wrench. Tighten it to 90 nm torque.
Step 21

Remove the jacks and chocks.

Was this manual helpful?

Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.

Need New Tyres?

Find out which tyre and wheel sizes are compatible with the CITROËN C3 III Box Body / Hatchback (SX, SY) model

CITROËN C3 III Kasten / Schrägheck (SX, SY) tyre size

How to change front lower arm on CITROËN C3 III Box Body / Hatchback (SX, SY) – replacement guide

Free download PDF
2.68 MB
How to change front wheel bearing on CITROËN C3 III Box Body / Hatchback (SX, SY) – replacement guide

Free download PDF
3.6 MB
How to change rear brake pads on CITROËN C3 III Box Body / Hatchback (SX, SY) – replacement guide

Free download PDF
1.58 MB
How to change front brake pads on CITROËN C3 III Box Body / Hatchback (SX, SY) – replacement guide

Free download PDF
1.43 MB
How to change front brake discs on CITROËN C3 III Box Body / Hatchback (SX, SY) – replacement guide

Free download PDF
1.73 MB
How to change spark plugs on CITROËN C3 III Box Body / Hatchback (SX, SY) – replacement guide

Free download PDF
1.36 MB

How to change front anti roll bar links on CITROËN C3 Picasso – replacement guide

Free download PDF
1.25 MB
How to change front anti roll bar links on CITROËN C3 II (SC_) – replacement guide

Free download PDF
1.25 MB
How to change front anti roll bar links on Citroen C3 1 – replacement guide

Free download PDF
1.31 MB
How to change front anti roll bar links on CITROËN C3 III (SX) – replacement guide

Free download PDF
1.25 MB
How to change front anti roll bar links on CITROËN C3 Aircross II (2R_, 2C_) – replacement guide

Free download PDF
1.26 MB
How to change front anti roll bar links on CITROËN C3 Pluriel (HB_) – replacement guide

Free download PDF
1.24 MB

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

What to do if your car’s bonnet won’t open | AUTODOC tips

20K views

Published on: 12/09/2024
BMW E30 Turbo Suspension Swap: Boost Your Handling | AUTODOC project

2K views

Published on: 04/03/2021
The Fast and Easy Way to Fix a Broken Wheel Stud | AUTODOC tips

9K views

Published on: 08/12/2020
5 Essential Tips to Prepare Your Car for Winter | AUTODOC tips

7K views

Published on: 05/02/2024