
Disclaimer
How to change spark plugs on CITROËN C3 III Box Body / Hatchback (SX, SY) – replacement guide
downloads:
6
Views:
37

Recommended replacement interval for the part category Spark plug : 18 month / 30000 km
Important!
This replacement procedure can be used for:
CITROËN C3 III Box Body / Hatchback (SX, SY) PureTech … View more
The steps may slightly vary depending on the car design.
CITROËN C3 III Box Body / Hatchback (SX, SY) PureTech … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Spark Plug for C3 III Box Body / Hatchback (SX, SY) and other CITROËN models
Spark plug
Alternative products

Electronic spray
High-temperature anti-seize lubricant
Drive socket # 8
Spark plug socket # 16
Torque wrench
Flat Screwdriver
Fender cover
Replacement: spark plugs – CITROËN C3 III Kasten / Schrägheck (SX, SY). AUTODOC recommends:
- The replacement procedure is the same for all spark plugs.
- All work should be done with the engine stopped.
Replacement: spark plugs – CITROËN C3 III Kasten / Schrägheck (SX, SY). Recommended sequence of steps:
- Step 1Open the hood.Step 2Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.Step 3Unplug the connectors from the ignition coils. Use a flat screwdriver.
- Step 4Unscrew the ignition coil bracket. Use a drive socket #8.
- Step 5Take out the ignition coils from the spark plug wells.Replacement: spark plugs – CITROËN C3 III Kasten / Schrägheck (SX, SY). Professionals recommend:Remember the sequence of steps for ignition coil demounting.
- Step 6Clean dirt, dust and debris from inside the spark plug wells.
- Step 7Unscrew the spark plugs. Use the spark plug socket #16.
- Step 8Take out the spark plugs.
- Step 9Apply a thin layer of a special high temperature anti-seize lubricant to the threads of the new spark plugs.
- Step 10Install the new spark plugs into their mounting seats.
- Step 11Screw new spark plugs and tighten them. Use the spark plug socket #16. Use a torque wrench. Tighten it to 22 nm torque.Replacement: spark plugs – CITROËN C3 III Kasten / Schrägheck (SX, SY). Tip from AUTODOC experts:Don't tighten the plugs with excessive force. Exceeding tightening torque can damage the thread connection. Be careful when working with a spark plug wrench. Its skewing can cause damage to the threaded connection.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the CITROËN C3 III Box Body / Hatchback (SX, SY) model
Popular maintenance tutorials for CITROËN C3 III Kasten / Schrägheck (SX, SY)
Complete guides for changing the Engine spark plug on different CITROËN C3 models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your CITROËN C3 III Box Body / Hatchback (SX, SY)
View more
- What to do if your car’s bonnet won’t open | AUTODOC tips
- Top 5 Mistakes to Avoid for Safe Engine Bay Repairs | AUTODOC Tips
- How to Fix a Squealing Belt: Causes & Solutions | AUTODOC Expert Tips
- How to restore a steering wheel | AUTODOC tips
Most commonly replaced car parts on CITROËN C3
Time to replace parts? Get even better deals in our Shop app.

SCAN ME