Important!

This replacement procedure can be used for:
CITROËN C3 Aircross II (2R_, 2C_) 1.6 BlueHDi (2CBHYB), CITROËN C3 Aircross II (2R_, 2C_) 1.6 BlueHDi (2CBHZH), CITROËN C3 Aircross II (2R_, 2C_) 1.2 PureTech (2RHMRC, 2RHMZB), CITROËN C3 Aircross II (2R_, 2C_) 1.2 PureTech (2RHNZB, 2RHNZW, 2RHNPX, 2RHNPJ), CITROËN C3 Aircross II (2R_, 2C_) 1.2 PureTech (2RHNYH), CITROËN C3 Aircross II (2R_, 2C_) 1.6 BlueHDi (2CBHXH), CITROËN C3 Aircross II (2R_, 2C_) 1.5 BlueHDi (2CYHYJ), CITROËN C3 Aircross II (2R_, 2C_) 1.5 BlueHDi (2CYHXX), CITROËN C3 Aircross II (2R_, 2C_) 1.5 BlueHDi (2CYHYJ), CITROËN C3 Aircross II (2R_, 2C_) 1.6 HDi (2C9HPA), CITROËN C3 Aircross II (2R_, 2C_) 1.5 BlueHDi … View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

Alternative products

Anti-roll bar link

Replacement: anti roll bar links – CITROËN C3 AIRCROSS II. Tools you'll need:

                      Wire brush
                    
                      WD-40 spray
                    
                      Brake cleaner 
                    
                      Copper grease 
                    
                      Torque wrench
                    
                      Combination spanner #16
                    
                      Torx bit T30
                    
                      Drive socket # 17 
                    
                      Wheel impact socket #17
                    
                      Ratchet wrench
                    
                      Wheel chock

Buy tools

Replacement: anti roll bar links – CITROËN C3 AIRCROSS II. AUTODOC recommends:

Replace the stabiliser links on CITROËN C3 AIRCROSS II in pairs.
The replacement procedure is identical for both stabiliser links on the same axle.
All work should be done with the engine stopped.

Replacement: anti roll bar links – CITROËN C3 AIRCROSS II. Recommended sequence of steps:

Step 1

Secure the wheels with chocks.
Step 2

Loosen the wheel mounting bolts. Use wheel impact socket #17.
Step 3

Raise the front of the car and secure on supports.

Step 4

Unscrew the wheel bolts.

Replacement: anti roll bar links – CITROËN C3 AIRCROSS II. Tip:
To avoid injury, hold up the wheel when unscrewing the bolts.
Step 5

Remove the wheel.
Step 6

Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray.
Step 7

Unscrew the fastener connecting the stabilizer link to the stabilizer bar. Use a combination spanner #16. Use Torx T30. Use a ratchet wrench.
Step 8

Unscrew the fastener connecting the stabilizer link to the shock strut. Use a combination spanner #16. Use Torx T30. Use a ratchet wrench.
Step 9

Remove the stabilizer rod.

AUTODOC recommends:
Examine stabiliser bushes. Replace them if needed.
Step 10

Clean the mounting seats of the stabiliser link. Use a wire brush. Use WD-40 spray.
Step 11

Install a new rod, tighten the fasteners.
Step 12

Tighten the fastener connecting the stabilizer link to the shock strut. Use a drive socket #17. Use a torque wrench. Tighten it to 43 Nm torque.
Step 13

Tighten the fastener connecting the stabilizer link to the stabilizer bar. Use a drive socket #17. Use a torque wrench. Tighten it to 43 Nm torque.
Step 14

Treat all joints of the stabiliser link. Use copper grease.
Step 15

Treat the surface where the brake disc contacts the wheel rim. Use copper grease.
Step 16

Clean the brake disk surface. Use a brake cleaner.

Replacement: anti roll bar links – CITROËN C3 AIRCROSS II. Tip from AUTODOC:
After applying the spray, wait a few minutes.
Step 17

Install the wheel.

AUTODOC recommends:
Warning! To avoid injury, hold the wheel while screwing in the fastening bolts on the car. CITROËN C3 AIRCROSS II
Step 18

Screw in the wheel bolts. Use wheel impact socket #17.
Step 19

Lower the car and working in a cross order, tighten the wheel bolts. Use wheel impact socket #17. Use a torque wrench. Tighten it to 100 nm torque.
Step 20

Remove the jacks and chocks.

Was this manual helpful?

Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.

Need New Tyres?

Find out which tyre and wheel sizes are compatible with the CITROËN C3 Aircross II (2R, 2C) model

Citroen C3 Aircross 2 tyre size

How to change front wheel bearing on CITROËN C3 Aircross II (2R_, 2C_) – replacement guide

Free download PDF
5.01 MB
How to change rear wheel bearing on CITROËN C3 Aircross II (2R_, 2C_) – replacement guide

Free download PDF
2.16 MB
How to change front brake pads on CITROËN C3 Aircross II (2R_, 2C_) – replacement guide

Free download PDF
1.29 MB
How to change rear brake pads on CITROËN C3 Aircross II (2R_, 2C_) – replacement guide

Free download PDF
1.59 MB
How to change front brake discs on CITROËN C3 Aircross II (2R_, 2C_) – replacement guide

Free download PDF
1.74 MB
How to change rear brake discs on CITROËN C3 Aircross II (2R_, 2C_) – replacement guide

Free download PDF
2.32 MB

How to change front anti roll bar links on CITROËN C3 Picasso – replacement guide

Free download PDF
1.25 MB
How to change front anti roll bar links on CITROËN C3 II (SC_) – replacement guide

Free download PDF
1.25 MB
How to change front anti roll bar links on Citroen C3 1 – replacement guide

Free download PDF
1.31 MB
How to change front anti roll bar links on CITROËN C3 III (SX) – replacement guide

Free download PDF
1.25 MB
How to change front anti roll bar links on CITROËN C3 Pluriel (HB_) – replacement guide

Free download PDF
1.24 MB
How to change front anti roll bar links on CITROËN C3 III Box Body / Hatchback (SX, SY) – replacement guide

Free download PDF
1.25 MB

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

How to Fix P0401 ✅ error code Insufficient EGR flow

7K views

Published on: 08/05/2025
How to restore a steering wheel | AUTODOC tips

63K views

Published on: 17/02/2022
How to choose the right engine oil for your car | AUTODOC

15K views

Published on: 01/07/2020
How to tighten cylinder head bolts

14K views

Published on: 06/03/2025