
Disclaimer
How to change front anti roll bar links on CITROËN C3 Picasso – replacement guide
downloads:
11
Views:
241
Important!
This replacement procedure can be used for:
CITROËN C3 Picasso 1.6 HDi, CITROËN C3 Picasso 1.4 VTi, CITROËN C3 Picasso 1.6 VTi, CITROËN C3 Picasso 1.6 HDi, CITROËN C3 Picasso 1.6, CITROËN C3 Picasso 1.6 HDi, CITROËN C3 Picasso 1.6 HDI, CITROËN C3 Picasso 1.4 VTi LPG, CITROËN C3 Picasso 1.6 HDi, CITROËN C3 Picasso 1.2 THP, CITROËN C3 Picasso 1.6 BlueHDi, CITROËN C3 Picasso 1.6 VTi … View more
The steps may slightly vary depending on the car design.
CITROËN C3 Picasso 1.6 HDi, CITROËN C3 Picasso 1.4 VTi, CITROËN C3 Picasso 1.6 VTi, CITROËN C3 Picasso 1.6 HDi, CITROËN C3 Picasso 1.6, CITROËN C3 Picasso 1.6 HDi, CITROËN C3 Picasso 1.6 HDI, CITROËN C3 Picasso 1.4 VTi LPG, CITROËN C3 Picasso 1.6 HDi, CITROËN C3 Picasso 1.2 THP, CITROËN C3 Picasso 1.6 BlueHDi, CITROËN C3 Picasso 1.6 VTi … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Anti Roll Bar Links for C3 Picasso and other CITROËN models
Anti-roll bar link
Alternative products

Wire brush
WD-40 spray
Brake cleaner
Copper grease
Torque wrench
Combination spanner #16
Torx bit T30
Drive socket # 17
Wheel impact socket #17
Ratchet wrench
Wheel chock
Replacement: anti roll bar links – CITROËN C3 Picasso. AUTODOC recommends:
- Replace the stabiliser links on CITROËN C3 Picasso in pairs.
- The replacement procedure is identical for both stabiliser links on the same axle.
- All work should be done with the engine stopped.
Replacement: anti roll bar links – CITROËN C3 Picasso. Recommended sequence of steps:
- Step 1Secure the wheels with chocks.
- Step 2Loosen the wheel mounting bolts. Use wheel impact socket #17.
- Step 3Raise the front of the car and secure on supports.Step 4Unscrew the wheel bolts.Replacement: anti roll bar links – CITROËN C3 Picasso. Tip:To avoid injury, hold up the wheel when unscrewing the bolts.
- Step 5Remove the wheel.
- Step 6Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray.
- Step 7Unscrew the fastener connecting the stabilizer link to the stabilizer bar. Use a combination spanner #16. Use Torx T30. Use a ratchet wrench.
- Step 8Unscrew the fastener connecting the stabilizer link to the shock strut. Use a combination spanner #16. Use Torx T30. Use a ratchet wrench.
- Step 9Remove the stabilizer rod.AUTODOC recommends:Examine stabiliser bushes. Replace them if needed.
- Step 10Clean the mounting seats of the stabiliser link. Use a wire brush. Use WD-40 spray.
- Step 11Install a new rod, tighten the fasteners.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the CITROËN C3 Picasso model
Popular maintenance tutorials for Citroen C3 Picasso
Complete guides for changing the Drop links on different CITROËN C3 models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your CITROËN C3 Picasso
View more
- How to repair a bumper yourself | AUTODOC tips
- How to Use Sandblasting Equipment: Step-by-Step Guide | AUTODOC Tips
- 5 Essential Tips to Prepare Your Car for Winter | AUTODOC tips
- Top 5 Car Interior Cleaning Mistakes You Should Avoid | AUTODOC Tips
Most commonly replaced car parts on CITROËN C3
Time to replace parts? Get even better deals in our Shop app.

SCAN ME