
Disclaimer
How to change front anti roll bar links on CITROËN C2 Enterprise (JG_) – replacement guide
downloads:
2
Views:
11
Important!
This replacement procedure can be used for:
CITROËN C2 Enterprise (JG_) 1.4 HDi … View more
The steps may slightly vary depending on the car design.
CITROËN C2 Enterprise (JG_) 1.4 HDi … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Anti Roll Bar Links for C2 Enterprise (JG_) and other CITROËN models
Anti-roll bar link
Alternative products

Wire brush
WD-40 spray
Brake cleaner
Copper grease
Torx bit T30
Drive socket # 17
Combination spanner #17
Wheel impact socket #17
Ratchet wrench
Torque wrench
Wheel chock
AUTODOC recommends:
- Replace the stabiliser links on CITROËN C2 ENTERPRISE in pairs.
- The replacement procedure is identical for both stabiliser links on the same axle.
- All work should be done with the engine stopped.
Replacement: anti roll bar links – CITROËN C2 ENTERPRISE. Recommended sequence of steps:
- Step 1Secure the wheels with chocks.
- Step 2Loosen the wheel mounting bolts. Use wheel impact socket #17.
- Step 3Raise the front of the car and secure on supports.Step 4Unscrew the wheel bolts.AUTODOC recommends:Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. CITROËN C2 ENTERPRISE
- Step 5Remove the wheel.
- Step 6Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray.
- Step 7Unscrew the fastener connecting the stabilizer link to the shock strut. Use a combination spanner #17. Use Torx T30. Use a ratchet wrench.
- Step 8Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray.
- Step 9Unscrew the fastener connecting the stabilizer link to the stabilizer bar. Use a combination spanner #17. Use Torx T30. Use a ratchet wrench.
- Step 10Remove the stabilizer rod.Replacement: anti roll bar links – CITROËN C2 ENTERPRISE. Tip from AUTODOC experts:Examine stabiliser bushes. Replace them if needed.
- Step 11Clean the mounting seats of the stabiliser link. Use a wire brush. Use WD-40 spray.
- Step 12Install a new rod, tighten the fasteners.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the CITROËN C2 Enterprise (JG) model
Popular maintenance tutorials for Citroen C2 Enterprise
Complete guides for changing the Drop links on different CITROËN C2 models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your CITROËN C2 Enterprise (JG_)
View more
- How to Order Car Parts Online: Avoid These 5 Common Pitfalls
- Easy Steps to Fix Minor Scratches on Your Vehicle | AUTODOC tips
- 5 most common causes of oil leaks | AUTODOC tips
- Engine Overheating? Replace Your Cooling Fan to Fix It
Most commonly replaced car parts on CITROËN C2
Time to replace parts? Get even better deals in our Shop app.

SCAN ME