How to carry out replacement: Anti Roll Bar Links 1.0 VTi Citroen C1 2
Disclaimer
Change Citroen C1 2 1.0 VTi Anti Roll Bar Links yourself – manuals and video tutorials

How to change front anti roll bar links on CITROËN C1 II (PA, PS) – replacement guide

downloads: 8
Views: 187
Download your free tutorial and fix CITROËN C1 II (PA_, PS_) 1.2 VTi problems yourself Download for free 1.32 MB Anti Roll Bar Links for Citroen C1 2 Shop now
Leave a comment Open in a new tab
Important!
This replacement procedure can be used for:
CITROËN C1 II (PA_, PS_) 1.0 VTi, CITROËN C1 II (PA_, PS_) 1.2 VTi, CITROËN C1 II (PA_, PS_) 1.0 VTi … View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Anti Roll Bar Links for C1 II (PA_, PS_) and other CITROËN models
Alternative products
How to change Anti-roll bar link on Citroen C1 2 1.0 VTi – step-by-step instructions for straightforward car repair Anti-roll bar link
Tools
Replacement: anti roll bar links – CITROËN C1 II. Tools you might need:
Wire brush
WD-40 spray
Brake cleaner
Copper grease
Combination spanner #10
Combination spanner #12
Combination spanner #13
Drive socket # 12
Drive socket # 13
Wheel impact socket #17
Ratchet wrench
Torque wrench
Crow bar
Hydraulic transmission jack
Wheel chock
Buy tools
AUTODOC recommends:
  • Replace the stabiliser links on CITROËN C1 II in pairs.
  • The replacement procedure is identical for both stabiliser links on the same axle.
  • All work should be done with the engine stopped.
Replacement: anti roll bar links – CITROËN C1 II. Take the following steps:
  1. Step 1
    How to change Anti Roll Bar Links on Citroen C1 2 2014 - free PDF and video manuals
    Secure the wheels with chocks.
  2. Step 2
    How to replace CITROËN C1 II (PA_, PS_) 1.0 VTi 2015 Anti Roll Bar Links - step-by-step manuals and video guides
    Loosen the wheel mounting bolts. Use wheel impact socket #17.
  3. Step 3
    Raise the front of the car and secure on supports.
    Step 4
    Citroen C1 2 1.2 VTi 2016 Anti Roll Bar Links replacement: free workshop manuals
    Unscrew the wheel bolts.
    AUTODOC recommends:
    Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. CITROËN C1 II
  4. Step 5
    Changing Anti Roll Bar Links on CITROËN C1 II (PA_, PS_) 1.2 VTi 2017 by yourself
    Remove the wheel.
  5. Step 6
    How to remove CITROËN C1 1.0 VTi 2018 Anti Roll Bar Links - online easy-to-follow instructions
    Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray.
  6. Step 7
    How to replace Anti Roll Bar Links on CITROËN C1 II (PA_, PS_) 2019: download PDF manuals and video instructions
    Unscrew the fastener connecting the stabilizer link to the stabilizer bar. Use a combination spanner #12.
  7. Step 8
    How hard is it to do yourself: Anti Roll Bar Links replacement on Citroen C1 2 1.0 VTi 2020 - download illustrated guide
    Unscrew the fastener connecting the stabilizer bar with the control arm. Use a drive socket #12. Use a ratchet wrench.
  8. Step 9
    Need to know how to renew Anti Roll Bar Links on CITROËN C1 2021? This free workshop manual will help you to do it yourself
    Remove the stabilizer rod. Use a crowbar.
    Replacement: anti roll bar links – CITROËN C1 II. AUTODOC recommends:
    Examine stabiliser bushes. Replace them if needed.
  9. Step 10
    Clean the mounting seats of the stabiliser link. Use a wire brush. Use WD-40 spray.
    Step 11
    Changing of Anti Roll Bar Links on Citroen C1 2 2014 won't be an issue if you follow this illustrated step-by-step guide
    Ιnstall the transverse stabilizer link.
  10. Step 12
    CITROËN C1 1.0 VTi Anti Roll Bar Links replacement: online guides and video tutorials
    Support the arm. Use a hydraulic transmission jack.
  11. Step 13
    Replacing Anti Roll Bar Links on Citroen C1 2 2016 1.0 VTi by yourself
    Tighten the fastener connecting the stabilizer bar with the control arm. Use a combination spanner #10. Use a combination spanner #13. Use a drive socket #13. Use a torque wrench. Tighten it to 18 Nm torque.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the CITROËN C1 II (PA, PS) model

Citroen C1 2 tyre size

Popular maintenance tutorials for Citroen C1 2

More manuals for Citroen C1 2

Complete guides for changing the Drop links on different CITROËN C1 models

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY CITROËN C1 II (PA_, PS_) Anti Roll Bar Links replacement - online guide
Tips & tricks for your CITROËN C1 II (PA_, PS_)
View more
  • How to change Drop links on CITROËN C1 II (PA_, PS_) 1.0 VTi - replacement tricks
    Checking the starter without removing it | AUTODOC tips
    28K views
    Published on: 01/12/2020
  • Changing Stabilizer link Citroen C1 2 1.0 VTi - Replacement Tips
    What to do if your car’s bonnet won’t open | AUTODOC tips
    18K views
    Published on: 12/09/2024
  • Maintenance Hacks - CITROËN C1 II (PA_, PS_) 1.2 VTi Sway bar link replacement guide
    TOP 8 mistakes car owners make | AUTODOC tips
    14K views
    Published on: 09/12/2021
  • Replace Drop link on Citroen C1 2 - free video tips
    How to repair a bumper yourself | AUTODOC tips
    19K views
    Published on: 01/06/2023

Most commonly replaced car parts on CITROËN C1

Professional manuals for the most common CITROËN models

ОЕ number
Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
CITROËN C1 II (PA_, PS_) Anti Roll Bar Links replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME