Disclaimer
How to change front anti roll bar links on ALPINA D10 Estate (E39) – replacement guide
downloads:
0
Views:
3
Important!
This replacement procedure can be used for:
ALPINA D10 Estate (E39) 3.0 D Biturbo … View more
The steps may slightly vary depending on the car design.
ALPINA D10 Estate (E39) 3.0 D Biturbo … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Anti Roll Bar Links for D10 Estate (E39) and other ALPINA models
Alternative products
Anti-roll bar link
Wire brush
WD-40 spray
Brake cleaner
Copper grease
Combination spanner #17
Drive socket # 17
Wheel impact socket #17
Ratchet wrench
Torque wrench
Wheel chock
Replacement: anti roll bar links – ALPINA D10 Estate (E39). AUTODOC experts recommend:
- Replace the stabiliser links on ALPINA D10 Estate (E39) in pairs.
- The replacement procedure is identical for both stabiliser links on the same axle.
- All work should be done with the engine stopped.
Replacement: anti roll bar links – ALPINA D10 Estate (E39). Take the following steps:
- Step 1
Secure the wheels with chocks. - Step 2
Loosen the wheel mounting bolts. Use wheel impact socket #17. - Step 3Raise the front of the car and secure on supports.Step 4
Unscrew the wheel bolts.Replacement: anti roll bar links – ALPINA D10 Estate (E39). Tip:To avoid injury, hold up the wheel when unscrewing the bolts. - Step 5
Remove the wheel. - Step 6
Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray. - Step 7
Unscrew the fastener connecting the stabilizer link to the stabilizer bar. Use a drive socket #17. Use a ratchet wrench. - Step 8
Unscrew the fastener connecting the stabilizer link to the shock strut. Use a combination spanner #17. Use a drive socket #17. Use a ratchet wrench. - Step 9
Remove the stabilizer rod.Replacement: anti roll bar links – ALPINA D10 Estate (E39). AUTODOC recommends:Examine stabiliser bushes. Replace them if needed. - Step 10
Clean the mounting seats of the stabiliser link. Use a wire brush. Use WD-40 spray. - Step 11
Ιnstall the transverse stabilizer link. - Step 12
Tighten the stabiliser link fastener. Use a combination spanner #17. Use a drive socket #17. Use a ratchet wrench.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the ALPINA D10 Touring (E39) model
Popular maintenance tutorials for ALPINA D10 Estate (E39)
Free download PDF
2.02 MB
Free download PDF1.78 MB
Free download PDF1.98 MB
Free download PDF1.98 MB
Free download PDF1.98 MB
Free download PDF1.6 MB
Complete guides for changing the Drop links on different ALPINA D10 models
Free download PDF1.18 MB
Free download PDF972.8 KB
Free download PDF1.57 MB
Free download PDF1.55 MB
Free download PDF1.47 MB
Free download PDF1.18 MB
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your ALPINA D10 Estate (E39)
View more
Understanding Airbag Light Warnings | Essential Tips for Car Safety
The most common problems when buying a used car | AUTODOC
Top Automatic Transmission Blunders You Must Dodge | AUTODOC Insights
5 Essential Tips to Prepare Your Car for Winter | AUTODOC tips
Most commonly replaced car parts on ALPINA D10
Time to replace parts? Get even better deals in our Shop app.
SCAN ME