How to carry out replacement: Anti Roll Bar Links 2.7 ALPINA B3 Estate (E30)
Disclaimer
Change ALPINA B3 Estate (E30) 2.7 Anti Roll Bar Links yourself – manuals and video tutorials

How to change front anti roll bar links on ALPINA B3 Estate (E30) – replacement guide

downloads: 0
Views: 3
Download your free tutorial and fix ALPINA B3 Estate (E30) 2.7 problems yourself Download for free 1.55 MB Anti Roll Bar Links for ALPINA B3 Estate (E30) Shop now
Leave a comment Open in a new tab
Important!
This replacement procedure can be used for:
ALPINA B3 Estate (E30) 2.7 … View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Anti Roll Bar Links for B3 Estate (E30) and other ALPINA models
Alternative products
How to change Anti-roll bar link on ALPINA B3 Estate (E30) 2.7 – step-by-step instructions for straightforward car repair Anti-roll bar link
Tools
Replacement: anti roll bar links – ALPINA B3 Estate (E30). Tools you might need:
Wire brush
WD-40 spray
Brake cleaner
Copper grease
Torque wrench
Combination spanner #13
Combination spanner #16
Combination spanner #17
Drive socket # 13
Drive socket # 16
Drive socket # 17
Wheel impact socket #17
Ratchet wrench
Hydraulic transmission jack
Wheel chock
Buy tools
AUTODOC recommends:
  • Replace the stabiliser links on ALPINA B3 Estate (E30) in pairs.
  • The replacement procedure is identical for both stabiliser links on the same axle.
  • Please note: all work on the car – ALPINA B3 Estate (E30) – should be done with the engine switched off.
Carry out replacement in the following order:
  1. Step 1
    Secure the wheels with chocks.
    Step 2
    How to change Anti Roll Bar Links on ALPINA B3 Estate (E30) 1987 - free PDF and video manuals
    Loosen the wheel mounting bolts. Use wheel impact socket #17.
  2. Step 3
    Raise the front of the car and secure on supports.
    Step 4
    How to replace ALPINA B3 Estate (E30) 2.7 1988 Anti Roll Bar Links - step-by-step manuals and video guides
    Unscrew the wheel bolts.
    AUTODOC recommends:
    Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. ALPINA B3 Estate (E30)
  3. Step 5
    ALPINA B3 Estate (E30) 2.7 1989 Anti Roll Bar Links replacement: free workshop manuals
    Remove the wheel.
  4. Step 6
    Changing Anti Roll Bar Links on ALPINA B3 Estate (E30) 2.7 1990 by yourself
    Clean all joints of the stabiliser link. Use a wire brush. Use WD-40 spray.
  5. Step 7
    How to remove ALPINA B3 2.7 1991 Anti Roll Bar Links - online easy-to-follow instructions
    Unscrew the fastener connecting the stabilizer bar with the control arm. Use a combination spanner #13. Use a drive socket #13. Use a ratchet wrench.
  6. Step 8
    How to replace Anti Roll Bar Links on ALPINA B3 Estate (E30) 1992: download PDF manuals and video instructions
    Remove the fastening bolt.
  7. Step 9
    How hard is it to do yourself: Anti Roll Bar Links replacement on ALPINA B3 Estate (E30) 2.7 1987 - download illustrated guide
    Unscrew the fastener connecting the stabilizer link to the stabilizer bar. Use a combination spanner #16. Use a drive socket #16. Use a ratchet wrench.
  8. Step 10
    Need to know how to renew Anti Roll Bar Links on ALPINA B3 1988? This free workshop manual will help you to do it yourself
    Remove the stabilizer rod.
    Replacement: anti roll bar links – ALPINA B3 Estate (E30). AUTODOC experts recommend:
    Examine the stabiliser bushes. Replace them if necessary.
  9. Step 11
    Changing of Anti Roll Bar Links on ALPINA B3 Estate (E30) 1989 won't be an issue if you follow this illustrated step-by-step guide
    Clean the mounting seats of the stabiliser link. Use a wire brush. Use WD-40 spray.
  10. Step 12
    ALPINA B3 2.7 Anti Roll Bar Links replacement: online guides and video tutorials
    Ιnstall the transverse stabilizer link.
  11. Step 13
    Install the fastening bolt.
    Step 14
    Replacing Anti Roll Bar Links on ALPINA B3 Estate (E30) 1991 2.7 by yourself
    Tighten the stabiliser link fastener. Use a combination spanner #17. Use a drive socket #17. Use a ratchet wrench.
  12. Step 15
    B3 Estate (E30) 2.7 1992 Anti Roll Bar Links DIY replacement workshop manual
    Support the arm. Use a hydraulic transmission jack.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the ALPINA B3 Touring (E30) model

ALPINA B3 Estate (E30) tyre size

Popular maintenance tutorials for ALPINA B3 Estate (E30)

More manuals for ALPINA B3 Estate (E30)

Complete guides for changing the Drop links on different ALPINA B3 models

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY ALPINA B3 Estate (E30) Anti Roll Bar Links replacement - online guide
Tips & tricks for your ALPINA B3 Estate (E30)
View more
  • How to change Drop links on ALPINA B3 Estate (E30) 2.7 - replacement tricks
    Fuse Replacement Made Simple: Step-by-Step Guide | AUTODOC
    2K views
    Published on: 15/08/2020
  • Changing Stabilizer link ALPINA B3 Estate (E30) 2.7 - Replacement Tips
    #TPMS Explained: Why Your Light is On and How to Respond Safely
    8K views
    Published on: 28/09/2023
  • Maintenance Hacks - ALPINA B3 Estate (E30) 2.7 Sway bar link replacement guide
    How to repair a bumper yourself | AUTODOC tips
    16K views
    Published on: 01/06/2023
  • Replace Drop link on ALPINA B3 Estate (E30) - free video tips
    How to prevent car windows from fogging up | AUTODOC tips
    13K views
    Published on: 04/02/2021

Most commonly replaced car parts on ALPINA B3

Professional manuals for the most common ALPINA models

Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
ALPINA B3 Estate (E30) Anti Roll Bar Links replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME