
Disclaimer
How to change front ABS sensor on VW TOURAN (1T3) – replacement guide
downloads:
5
Views:
47
Important!
This replacement procedure can be used for:
VW TOURAN (1T3) 1.2 TSI, VW TOURAN (1T3) 2.0 TDI, VW TOURAN (1T3) 1.6 TDI, VW TOURAN (1T3) 2.0 TDI, VW TOURAN (1T3) 2.0 TDI, VW TOURAN (1T3) 1.6 TDI, VW TOURAN (1T3) 1.4 TSI, VW TOURAN (1T3) 1.4 TSI EcoFuel, VW TOURAN (1T3) 2.0 TDI, VW TOURAN (1T3) 1.4 TSI … View more
The steps may slightly vary depending on the car design.
VW TOURAN (1T3) 1.2 TSI, VW TOURAN (1T3) 2.0 TDI, VW TOURAN (1T3) 1.6 TDI, VW TOURAN (1T3) 2.0 TDI, VW TOURAN (1T3) 2.0 TDI, VW TOURAN (1T3) 1.6 TDI, VW TOURAN (1T3) 1.4 TSI, VW TOURAN (1T3) 1.4 TSI EcoFuel, VW TOURAN (1T3) 2.0 TDI, VW TOURAN (1T3) 1.4 TSI … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – ABS Sensor for TOURAN (1T3) and other VW models
ABS sensor
Alternative products

Wire brush
Nylon cleaning brush
WD-40 spray
Brake cleaner
Electronic spray
Multipurpose grease
Copper grease
Torque wrench
HEX bit No.H5
Wheel impact socket #17
Ratchet wrench
Flat screwdriver
Wheel chock
Replacement: ABS sensor – VW TOURAN (1T3). AUTODOC experts recommend:
- All work should be done with the engine stopped.
Replacement: ABS sensor – VW TOURAN (1T3). Use the following procedure:
- Step 1Secure the wheels with chocks.Step 2Loosen the wheel mounting bolts. Use wheel impact socket #17.
- Step 3Raise the front of the car and secure on supports.Step 4Unscrew the wheel bolts.AUTODOC recommends:Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. VW TOURAN (1T3)
- Step 5Remove the wheel.
- Step 6Detach the ABS sensor connector.
- Step 7Clean the ABS sensor fastener. Use a wire brush. Use WD-40 spray.
- Step 8Unscrew the ABS sensor fastener. Use HEX No.H5. Use a ratchet wrench.
- Step 9Disconnect the ABS sensor.
- Step 10Clean the ABS sensor mounting seat. Use a wire brush. Use WD-40 spray.
- Step 11Treat the ABS sensor fastener. Use a multipurpose grease. Use a flat screwdriver.
- Step 12Connect the ABS sensor.
- Step 13Tighten the fastener that connects the ABS sensor to the steering knuckle. Use HEX No.H5. Use a torque wrench. Tighten it to 7 Nm torque.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the VW Touran I (1T3) model
Popular maintenance tutorials for Touran 1t3
Complete guides for changing the Wheel speed sensor on different VW TOURAN models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your VW TOURAN (1T3)
View more
- Revive Your Tyres: Expert Tips for a Lasting Shine | AUTODOC Guide
- How to remove scratches from car plastic | AUTODOC tips
- How to Fix a Squealing Belt: Causes & Solutions | AUTODOC Expert Tips
- DIY vehicle AC compressor restoration
Most commonly replaced car parts on VW TOURAN
Time to replace parts? Get even better deals in our Shop app.

SCAN ME