Important!
This replacement procedure can be used for:
SEAT Inca (6K9) 1.6 i, SEAT Inca (6K9) 1.4 16V, SEAT Inca (6K9) 1.7 D, SEAT Inca (6K9) 1.9 SDI, SEAT Inca (6K9) 1.9 D, SEAT Inca (6K9) 1.6 i, SEAT Inca (6K9) 1.4 i View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

Tools
Replacement: ABS sensor – SEAT INCA (6K9). Tools you might need:
Wire brush
Nylon cleaning brush
WD-40 spray
Brake cleaner
Electronic spray
Copper grease
Multipurpose grease
Torque wrench
Torx bit T30
HEX bit No.H5
HEX bit No.H7
Wheel impact socket #17
Ratchet wrench
Flat screwdriver
Pin punch
Tap wrench
Hammer
Crow bar
Wheel chock
Replacement: ABS sensor – SEAT INCA (6K9). Tip from AUTODOC:
  • All work should be done with the engine stopped.
Replacement: ABS sensor – SEAT INCA (6K9). Take the following steps:
  1. Step 1
    Secure the wheels with chocks.
    Step 2
    How to change ABS Sensor on Seat Inca 6K9 1995 - free PDF and video manuals
    Loosen the wheel mounting bolts. Use wheel impact socket #17.
  2. Step 3
    Raise the front of the car and secure on supports.
    Step 4
    How to replace SEAT Inca (6K9) 1.9 D 1996 ABS Sensor - step-by-step manuals and video guides
    Unscrew the wheel bolts.
    AUTODOC recommends:
    Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. SEAT INCA (6K9)
  3. Step 5
    Seat Inca 6K9 1.9 SDI 1997 ABS Sensor replacement: free workshop manuals
    Remove the wheel.
  4. Step 6
    Changing ABS Sensor on SEAT Inca (6K9) 1.6 i 1998 by yourself
    Clean the ABS sensor fastener. Use a nylon cleaning brush. Use WD-40 spray.
  5. Step 7
    How to remove SEAT INCA 1.7 D 1999 ABS Sensor - online easy-to-follow instructions
    Detach the ABS sensor connector. Use a flat screwdriver.
  6. Step 8
    How to replace ABS Sensor on SEAT Inca (6K9) 2000: download PDF manuals and video instructions
    Clean the ABS sensor fastener. Use a wire brush. Use WD-40 spray.
  7. Step 9
    How hard is it to do yourself: ABS Sensor replacement on Seat Inca 6K9 1.9 TDI 2001 - download illustrated guide
    Unscrew the ABS sensor fastener. Use HEX No.H5. Use a ratchet wrench.
  8. Step 10
    Need to know how to renew ABS Sensor on SEAT INCA 2002? This free workshop manual will help you to do it yourself
    Remove the caps from the brake caliper guide pin boots. Use a crowbar.
  9. Step 11
    Changing of ABS Sensor on Seat Inca 6K9 2003 won't be an issue if you follow this illustrated step-by-step guide
    Unscrew the brake caliper fastening. Use HEX No.H7. Use a ratchet wrench. Use a tap wrench.
  10. Step 12
    SEAT INCA 1.9 D ABS Sensor replacement: online guides and video tutorials
    Spread the brake pads. Use a crowbar.
  11. Step 13
    Replacing ABS Sensor on Seat Inca 6K9 1996 1.9 D by yourself
    Remove the brake caliper.
    Replacement: ABS sensor – SEAT INCA (6K9). Professionals recommend:
    Tie the caliper to the suspension or to the body with a wire without disconnecting from the brake hose to prevent depressurization of the brake system.Make sure that the brake caliper is not hanging on the brake hose.Don't press the brake pedal after the brake caliper has been removed. As a result, the piston can fall out from the brake cylinder, and brake fluid leakage and depressurization of the system may occur. Check the brake caliper bracket, brake caliper guide pins and boots. Clean them. Replace, if necessary.
  12. Step 14
    Inca (6K9) 1.7 D 1997 ABS Sensor DIY replacement workshop manual
    Clean the brake disc fastener. Use a wire brush. Use WD-40 spray.
  13. Step 15
    How to change ABS Sensor on SEAT Inca (6K9) 1998 - tips and tricks
    Unscrew the brake disc fastening. Use Torx T30. Use a ratchet wrench.
  14. Step 16
    Step-by-step recommendations for DIY replacement Seat Inca 6K9 1999 1.7 D ABS Sensor
    Remove the brake disc.
  15. Step 17
    DIY replacement of ABS Sensor on SEAT Inca (6K9) 1.4 i 2000 is not an issue anymore with our step-by-step tutorial
    Disconnect the ABS sensor. Use a pin punch. Use a hammer. Use a crowbar.
  16. Step 18
    How to change ABS Sensor on Seat Inca 6K9 1995 - free PDF and video manuals
    Clean the ABS sensor mounting seat. Use a wire brush. Use WD-40 spray.
  17. Step 19
    How to replace SEAT Inca (6K9) 1.9 D 1996 ABS Sensor - step-by-step manuals and video guides
    Treat the ABS sensor fastener. Use a multipurpose grease.
  18. Step 20
    Seat Inca 6K9 1.9 SDI 1997 ABS Sensor replacement: free workshop manuals
    Connect the ABS sensor.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the SEAT Inca (6K9) model.

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
SEAT Inca (6K9) ABS Sensor replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY SEAT Inca (6K9) ABS Sensor replacement - online guide
Tips & tricks for your SEAT Inca (6K9)
View more
  • How to change Wheel speed sensor on SEAT Inca (6K9) 1.4 i - replacement tricks
    TOP 5 mistakes during DIY oil change | AUTODOC tips
  • Changing ABS wheel speed sensor Seat Inca 6K9 1.9 D - Replacement Tips
    3 things to know before buying summer tyres | AUTODOC tips
  • Maintenance Hacks - SEAT Inca (6K9) 1.9 SDI Anti lock brake sensor replacement guide
    How to polish your car | AUTODOC tips
  • Replace Wheel speed sensor on Seat Inca 6K9 - free video tips
    5 car tips for a winter's day | AUTODOC tips