
Disclaimer
How to change engine thermostat on VW Passat Saloon (3C2) – replacement guide
downloads:
10
Views:
94

Recommended replacement interval for the part category Thermostat : 50000 km
Important!
This replacement procedure can be used for:
VW Passat Saloon (3C2) 1.9 TDI … View more
The steps may slightly vary depending on the car design.
VW Passat Saloon (3C2) 1.9 TDI … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Thermostat for Passat Saloon (3C2) and other VW models
Thermostat
Alternative products

Torque wrench
Drive socket # 7
Drive socket # 10
Drive socket # 13
Ratchet wrench
Fluid container
Funnel
Fender cover
Replacement: engine thermostat – VW PASSAT (3C2). Tip from AUTODOC:
- Check the condition of the coolant every time you replace the thermostat. Change the coolant if necessary.
- Please note: all work on the car – VW PASSAT (3C2) – should be done with the engine switched off.
Carry out replacement in the following order:
- Step 1Open the hood.Step 2Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.Step 3Unscrew the coolant reservoir cap.
- Step 4Prepare a container for fluids.
- Step 5Loosen the coolant hose clamp. Use a drive socket #7. Use a ratchet wrench.
- Step 6Detach the coolant hose.
- Step 7Drain the coolant from the engine.Replacement: engine thermostat – VW PASSAT (3C2). Tip:Caution! The coolant can be very hot.Wear gloves to prevent contact with hot liquid.All work should be done with the engine stopped.Wait until the coolant has completely flowed out of the drain hole.
- Step 8Unscrew the thermostat housing fasteners. Use a drive socket #13. Use a ratchet wrench.
- Step 9Remove the thermostat housing.AUTODOC recommends:Replacement: engine thermostat – VW PASSAT (3C2). Do not use excessive force when removing the part as this may damage it.
- Step 10Remove the thermostat.AUTODOC recommends:Replacement: engine thermostat – VW PASSAT (3C2). Do not use excessive force when removing the part as this may damage it.Caution! Coolant may leak out of the coolant lines and thermostat housing.
- Step 11Install a new thermostat.Replacement: engine thermostat – VW PASSAT (3C2). Tip:When installing, do not use excessive force to avoid damage to the part.
- Step 12Install the thermostat housing.
- Step 13Tighten the thermostat housing fasteners. Use a drive socket #10. Use a torque wrench. Tighten it to 13 nm torque.
- Step 14Attach the coolant hose.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the VW Passat B6 Saloon (3C2) model
Popular maintenance tutorials for Passat B6
Complete guides for changing the Thermostat housing on different VW PASSAT models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your VW Passat Saloon (3C2)
View more
- Checking the starter without removing it | AUTODOC tips
- Understanding Airbag Light Warnings | Essential Tips for Car Safety
- Save Money on Fuel with These Easy Tips | AUTODOC
- Stop Rust Before It Starts: Top 5 Tips for Car Body Protection | AUTODOC Insights
Most commonly replaced car parts on VW PASSAT
Time to replace parts? Get even better deals in our Shop app.

SCAN ME