Important!
This replacement procedure can be used for:
VW GOLF III Variant (1H5) 1.6, VW GOLF III Variant (1H5) 1.8, VW GOLF III Variant (1H5) 1.8 View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Distributor Cap for GOLF III Variant (1H5) and other VW models
Alternative products
How to change Distributor Cap on Golf 3 Estate 1.9 TDI – step-by-step instructions for straightforward car repair Distributor Cap
Tools
Replacement: distributor cap – VW GOLF III Variant (1H5). Tools you need:
Electronic spray
Crow bar
Fender cover
Replacement: distributor cap – VW GOLF III Variant (1H5). Tip from AUTODOC experts:
  • Follow the terms, recommendations and requirements of the part operation provided by the manufacturer.
  • Thoroughly inspect the ignition distributor assembly. Replace any worn parts.
  • All work should be done with the engine stopped.
Replacement: distributor cap – VW GOLF III Variant (1H5). Use the following procedure:
  1. Step 1
    Open the hood.
    Step 2
    Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
    Step 3
    How to change Distributor Cap on Golf 3 Estate 1993 - free PDF and video manuals
    Make marks on the distributor cap to indicate the installation order of the spark plug wires.
  2. Step 4
    How to replace VW GOLF III Variant (1H5) 1.9 TDI 1994 Distributor Cap - step-by-step manuals and video guides
    Disconnect the spark plug wires from the distributor cap.
    Replacement: distributor cap – VW GOLF III Variant (1H5). Tip from AUTODOC experts:
    Be careful to avoid damaging spark plug wires.
  3. Step 5
    Golf 3 Estate 1.8 1995 Distributor Cap replacement: free workshop manuals
    Release the distributor cap clips. Use a crowbar.
  4. Step 6
    Changing Distributor Cap on VW GOLF III Variant (1H5) 1.9 TD 1996 by yourself
    Remove the distributor cap.
    AUTODOC recommends:
    Replacement: distributor cap – VW GOLF III Variant (1H5). Do not use excessive force when removing the part as this may damage it.
  5. Step 7
    How to remove VW GOLF 2.9 VR6 Syncro 1997 Distributor Cap - online easy-to-follow instructions
    Install a new distributor cap.
    AUTODOC recommends:
    Replacement: distributor cap – VW GOLF III Variant (1H5). Do not use excessive force during installation. This may damage the part.
  6. Step 8
    How to replace Distributor Cap on VW GOLF III Variant (1H5) 1998: download PDF manuals and video instructions
    Fasten the distributor cap clips.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the VW Golf III Estate (1H5) model

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY VW GOLF III Variant (1H5) Distributor Cap replacement - online guide
Tips & tricks for your VW GOLF III Variant (1H5)
View more
  • How to change Ignition distributor cap on VW GOLF III Variant (1H5) 1.6 - replacement tricks
    How to tighten cylinder head bolts
  • Changing Ignition distributor cap Golf 3 Estate 1.9 TDI - Replacement Tips
    How to inspect and troubleshoot your car heater when it’s not working
  • Maintenance Hacks - VW GOLF III Variant (1H5) 1.8 Ignition distributor cap replacement guide
    Easy Steps to Paint Brake Calipers Without Special Skills or High Costs
  • Replace Ignition distributor cap on Golf 3 Estate - free video tips
    DIY vehicle AC compressor restoration
Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
VW GOLF III Variant (1H5) Distributor Cap replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME