Important!
This replacement procedure can be used for:
AUDI 80 (89, 89Q, 8A, B3) 1.6, AUDI 80 (89, 89Q, 8A, B3) 1.8 S, AUDI 80 (89, 89Q, 8A, B3) 1.8 S, AUDI 80 (89, 89Q, 8A, B3) 1.6, AUDI 80 (89, 89Q, 8A, B3) 1.8 S quattro View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

Tools
Replacement: distributor cap – AUDI 80 (89, 89Q, 8A, B3). Tools you need:
Electronic spray
Crow bar
Fender cover
Replacement: distributor cap – AUDI 80 (89, 89Q, 8A, B3). Tip from AUTODOC experts:
  • Follow the terms, recommendations and requirements of the part operation provided by the manufacturer.
  • Thoroughly inspect the ignition distributor assembly. Replace any worn parts.
  • All work should be done with the engine stopped.
Replacement: distributor cap – AUDI 80 (89, 89Q, 8A, B3). Use the following procedure:
  1. Step 1
    Open the hood.
    Step 2
    Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
    Step 3
    How to change Distributor Cap on Audi 80 B3 1986 - free PDF and video manuals
    Make marks on the distributor cap to indicate the installation order of the spark plug wires.
  2. Step 4
    How to replace AUDI 80 (89, 89Q, 8A, B3) 1.8 S 1987 Distributor Cap - step-by-step manuals and video guides
    Disconnect the spark plug wires from the distributor cap.
    Replacement: distributor cap – AUDI 80 (89, 89Q, 8A, B3). Tip from AUTODOC experts:
    Be careful to avoid damaging spark plug wires.
  3. Step 5
    Audi 80 B3 1.6 1988 Distributor Cap replacement: free workshop manuals
    Release the distributor cap clips. Use a crowbar.
  4. Step 6
    Changing Distributor Cap on AUDI 80 (89, 89Q, 8A, B3) 1.8 1989 by yourself
    Remove the distributor cap.
    AUTODOC recommends:
    Replacement: distributor cap – AUDI 80 (89, 89Q, 8A, B3). Do not use excessive force when removing the part as this may damage it.
  5. Step 7
    How to remove AUDI 80 2.0 E 1990 Distributor Cap - online easy-to-follow instructions
    Install a new distributor cap.
    AUTODOC recommends:
    Replacement: distributor cap – AUDI 80 (89, 89Q, 8A, B3). Do not use excessive force during installation. This may damage the part.
  6. Step 8
    How to replace Distributor Cap on AUDI 80 (89, 89Q, 8A, B3) 1991: download PDF manuals and video instructions
    Fasten the distributor cap clips.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the AUDI 80 B3 (89, 89Q, 8A) model.

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
AUDI 80 (89, 89Q, 8A, B3) Distributor Cap replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY AUDI 80 (89, 89Q, 8A, B3) Distributor Cap replacement - online guide
Tips & tricks for your AUDI 80 (89, 89Q, 8A, B3)
View more
  • How to change Ignition distributor cap on AUDI 80 (89, 89Q, 8A, B3) 1.6 TD - replacement tricks
    Top 5 mistakes when replacing spark plugs | AUTODOC tips
  • Changing Ignition distributor cap Audi 80 B3 1.8 S - Replacement Tips
    How to restore a damaged thread | AUTODOC tips
  • Maintenance Hacks - AUDI 80 (89, 89Q, 8A, B3) 1.6 Ignition distributor cap replacement guide
    What to do if your car heater isn't working | AUTODOC tips
  • Replace Ignition distributor cap on Audi 80 B3 - free video tips
    5 car tips for a winter's day | AUTODOC tips

Professional manuals for the most common AUDI models