Disclaimer
How to change brake drum on VW SCIROCCO (53) – replacement guide
downloads:
1
Views:
7
Recommended replacement interval for the part category Brake drum : 100000 km
Important!
This replacement procedure can be used for:
VW SCIROCCO (53) 1.6 … View more
The steps may slightly vary depending on the car design.
VW SCIROCCO (53) 1.6 … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Brake Drum for SCIROCCO (53) and other VW models
Alternative products

Wire brush
All-purpose cleaning spray
Multipurpose grease
Copper grease
Torque wrench
Combination spanner #10
Drive socket # 24
Wheel impact socket #17
Ratchet wrench
Hammer
Crow bar
Wheel chock
AUTODOC recommends:
- Replace the brake drums on VW SCIROCCO (53) in pair for the rear axle. Disregarding the parts state. It ensures even braking.
- The replacement procedure is identical for the right and left brake drums on the same axle.
- When replacing the brake drums, be sure to also change the brake shoes.
- Please note: all work on the car – VW SCIROCCO (53) – should be done with the engine switched off.
Carry out replacement in the following order:
- Step 1
Engage the parking brake lever. - Step 2
Loosen the parking brake cable. Use a combination spanner #10. - Step 3Secure the wheels with chocks.Step 4
Loosen the wheel mounting bolts. Use wheel impact socket #17. - Step 5Raise the rear of the car and secure on supports.Step 6
Unscrew the wheel bolts.AUTODOC recommends:Important! Hold the wheel while unscrewing the fastening bolts. VW SCIROCCO (53) - Step 7
Remove the wheel. - Step 8
Clean the brake drum. Use a wire brush. Use all-purpose cleaning spray. - Step 9
Remove the wheel hub nut cap. Use a crowbar. Use a hammer. - Step 10
Remove the cotter pin securing the hub nut. Use a crowbar. Use a hammer. - Step 11
Unscrew the hub nut. Use a drive socket #24. Use a ratchet wrench. - Step 12
Remove the brake drum assembled with the wheel hub bearing. - Step 13
Clean the hub bearing mounting seat. Use all-purpose cleaning spray. - Step 14
Treat the wheel hub in the area where it contacts the brake drum. Use a multipurpose grease. - Step 15
Install the new brake drum assembled with the wheel hub bearing. - Step 16
Install the wheel.AUTODOC recommends:Important! Hold the wheel while screwing in the fastening bolts. VW SCIROCCO (53) - Step 17
Screw in the wheel bolts. Use wheel impact socket #17.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the VW Scirocco I (53) model
Popular maintenance tutorials for VW Scirocco 1
Complete guides for changing the Drum brakes on different VW SCIROCCO models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your VW SCIROCCO (53)
View more
Top 5 car noises you shouldn't ignore
#TPMS Explained: Why Your Light is On and How to Respond Safely
Prevent Engine Damage: How to Identify Rocker Cover Gasket Issues and Proper Replacement | AUTODOC
Discover the 4 Key Reasons Your CHECK ENGINE Light Could Be On | AUTODOC Tips
Most commonly replaced car parts on VW SCIROCCO
ОЕ number
Time to replace parts? Get even better deals in our Shop app.

SCAN ME




























