How to change air filter on Renault Clio 2 – replacement guide
downloads:
8
Views:
231
0
Users voted – 0
Recommended replacement interval for the part category Air filter : 2year / 60000km
Important!
This replacement procedure can be used for:
RENAULT KANGOO (KC0/1_) 1.2 16V (KC05, KC06, KC03, KC0T, KC0W, KC1D),
RENAULT KANGOO (KC0/1_) 1.0,
RENAULT KANGOO Express (FC0/1_) 1.2 16V (FC05, FC0W, FC1D, FC1P, FC1K, FC0T),
RENAULT KANGOO Express (FC0/1_) 1.0,
RENAULT TWINGO I (C06_) 1.2 16V (C06C, C06D, C06K),
RENAULT TWINGO I (C06_) 1.2 16V (C060),
RENAULT Thalia I (LB_) 1.2 16V,
RENAULT TWINGO I Box (S06_) 1.2
…
View more
The steps may slightly vary depending on the car design.
How to change air filter on RENAULT CLIO 2 (C65) [TUTORIAL AUTODOC]
All the parts you need to replace – Air Filter for CLIO II (BB0/1/2_, CB0/1/2_) and other RENAULT models
Replacement: air filter – Renault Clio 2. AUTODOC recommends:
Follow the terms, recommendations and requirements of the part operation provided by the manufacturer.
Please note: all work on the car – Renault Clio 2 – should be done with the engine switched off.
Carry out replacement in the following order:
Step 1
Open the bonnet.
Step 2
Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
Step 3
Detach the coolant tank hose.
Step 4
Disconnect the air intake pipe from the air filter housing.
Step 5
Undo the fastening screws of the air filter cover. Use a drive socket #10. Use a ratchet wrench.
Step 6
Take off the filter lid.
Step 7
Remove the filter element from the filter housing.
Step 8
Insert a new filter element into the filter housing. Make sure that the filter edge fits tight to the housing.
Replacement: air filter – Renault Clio 2. AUTODOC experts recommend:
Check out the correct location of the filter element. Do not skew.Renault Clio 2 – It's important to only use high-quality filters.During installation, make sure to prevent dust and dirt from getting into the air filter housing.
Step 9
Reinstall the air filter cover. Fasten it.
Step 10
Screw in the fastening screws of the air filter cover. Use a drive socket #10. Use a ratchet wrench.
Step 11
Attach the coolant tank hose.
Step 12
Connect the air intake pipe to the air filter housing.
Step 13
Remove the fender protection cover.
Step 14
Close the hood.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?
Find out which tyre and wheel sizes are compatible with the RENAULT Clio II Hatchback (BB, CB) model.
It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents
Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
Scan
To download the app:
- scan the QR code
- download from App Store
- download from Google Play
Tips & tricks for your RENAULT CLIO II (BB0/1/2_, CB0/1/2_)
View more
How to save when buying car parts
How to unlock your car without a key | AUTODOC tips
How to easily repair a punctured tyre | AUTODOC tips