If it stalls and then doesn't start for a few minutes FIAT Scudo (270_, 272_)
@Smisprome
29.09.2020 19:16
Member
Good afternoon!
I’ve recently bought a Fiat Scudo 2 2007. 2-liter turbodiesel 100kw 140 hp.
It has been stalled several times while I was getting used to the clutch.
But if it stalled then it doesn’t start for about 5 minutes,
But if you let it stand then it starts up immediately and goes without problems.
Is this necessary to do? Or maybe this is some kind of protection? Or is there something wrong? Thank you in advance!
29.09.20
06.07.21
- @Quist197330.09.2020 08:08MemberYou need to read the errors and the computer will show. Any to start with (it is not necessary to look for a diesel service)
- @Sitimme01.10.2020 08:03MemberI've had this. The car stalled.I took out the key.Then I was waiting for the screen to go out.Inserted the key and then it started.I did not find another method, so I still have not figured it out (
FIAT 500 (312) 1.2@user_43487529.06.2021 19:02MemberI have fiat 500 1.2 petrol. When the engine is cold it works perfectly. Then when it warms noticed the idle goes below 600rpm and is fluctuating but not too much.However the check engine light is off.Does anyone knows what is the problem?
@Anna Johnson30.06.2021 09:49AUTODOC expertWe advise first of all to check the throttle valve, it may be dirty, because of this, the idle speed sensor does not work correctly, also check the idle speed sensor itself.- FIAT 500 (312) 1.2@user_43487530.06.2021 23:21MemberThe throttle valve is cleaned, I need to check the idle speed sensor which is underneath the throttle body.What can I use to clean the idle speed sensor?
@Crent193606.07.2021 09:51@user_434875MemberVD-40 or carburettor cleaner
- FIAT 500 (312) 1.2@user_43487505.07.2021 15:28MemberWith brake cleaner is good to clean the breather valve?Thanks
- @Crent193606.07.2021 09:52MemberIt is better to use the same carburettor cleaner
