Important!
This replacement procedure can be used for:
VW Passat Saloon (3G2, CB2) 1.4 TSI, VW Passat Saloon (3G2, CB2) 2.0 TDI, VW Passat Saloon (3G2, CB2) 2.0 TDI 4motion, VW Passat Saloon (3G2, CB2) 1.4 TSI, VW Passat Saloon (3G2, CB2) 1.6 TDI, VW Passat Saloon (3G2, CB2) 2.0 TDI, VW Passat Saloon (3G2, CB2) 2.0 TDI 4motion, VW Passat Saloon (3G2, CB2) 1.4 TSI 4motion, VW Passat Saloon (3G2, CB2) 1.8 TSI, VW Passat Saloon (3G2, CB2) 2.0 TDI 4motion, VW Passat Saloon (3G2, CB2) 2.0 TSI, VW Passat Saloon (3G2, CB2) 2.0 TSI 4motion, VW Passat Saloon (3G2, CB2) 1.4 GTE Hybrid, VW Passat Saloon (3G2, CB2) 2.0 TDI, VW Passat Saloon (3G2, CB2) 2.0 TDI (DBGB), VW Passat Saloon (3G2, CB2) 1.5 TSI, VW Passat Saloon (3G2, CB2) 2.0 TSI 4motion, VW Passat Saloon (3G2, CB2) 2.0 TSI, VW Passat Saloon (3G2, CB2) 2.0 TDI 4motion, VW Passat Saloon (3G2, CB2) 2.0 TDI, VW Passat Saloon (3G2, CB2) 2.0 TDI View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Track Rod End for Passat Saloon (3G2, CB2) and other VW models
Tools
Replacement: track rod end – VW PASSAT (3G2). Tools you might need:
Wire brush
WD-40 spray
Brake cleaner
Copper grease
Combination spanner #22
Combination spanner #24
Drive socket # 18
Wheel impact socket #17
Ratchet wrench
Torque wrench
Vernier caliper
Tap wrench
Wheel chock
Replacement: track rod end – VW PASSAT (3G2). Tip from AUTODOC experts:
  • Replace tie rod ends in pairs.
  • The replacement procedure is identical for the right and left tie rod ends.
  • All work should be done with the engine stopped.
Replacement: track rod end – VW PASSAT (3G2). Use the following procedure:
  1. Step 1
    How to change Track Rod End on VW Passat B8 3G Saloon 2014 - free PDF and video manuals
    Secure the wheels with chocks.
  2. Step 2
    How to replace VW Passat Saloon (3G2, CB2) 2.0 TDI 2015 Track Rod End - step-by-step manuals and video guides
    Loosen the wheel mounting bolts. Use wheel impact socket #17.
  3. Step 3
    Raise the front of the car and secure on supports.
    Step 4
    VW Passat B8 3G Saloon 1.6 TDI 2016 Track Rod End replacement: free workshop manuals
    Unscrew the wheel bolts.
    Replacement: track rod end – VW PASSAT (3G2). AUTODOC recommends:
    To avoid injury, hold up the wheel when unscrewing the bolts.
  4. Step 5
    Changing Track Rod End on VW Passat Saloon (3G2, CB2) 1.4 TSI 2017 by yourself
    Remove the wheel.
  5. Step 6
    How to remove VW PASSAT 1.4 GTE Hybrid 2018 Track Rod End - online easy-to-follow instructions
    Clean the fastener connecting the tie rod end to the steering knuckle. Use a wire brush. Use WD-40 spray.
  6. Step 7
    How to replace Track Rod End on VW Passat Saloon (3G2, CB2) 2019: download PDF manuals and video instructions
    Unscrew the end fastening nut to the steering knuckle. Use a drive socket #18. Use a tap wrench.
  7. Step 8
    How hard is it to do yourself: Track Rod End replacement on VW Passat B8 3G Saloon 2.0 TDI 2020 - download illustrated guide
    When deinstalling, mark or measure the precise position of the ball joint on the track rod, or count the number of turns in order to prevent misalignment afterward. Use a vernier caliper.
  8. Step 9
    Need to know how to renew Track Rod End on VW PASSAT 2021? This free workshop manual will help you to do it yourself
    Loosen the lock nut securing the tie rod end to the tie rod. Use a combination spanner #24.
  9. Step 10
    Changing of Track Rod End on VW Passat B8 3G Saloon 2022 won't be an issue if you follow this illustrated step-by-step guide
    Disconnect the tie rod end from the steering knuckle.
  10. Step 11
    VW PASSAT 2.0 TDI 4motion Track Rod End replacement: online guides and video tutorials
    Screw the end out of the tie rod.
  11. Step 12
    Replacing Track Rod End on VW Passat B8 3G Saloon 2024 2.0 TDI by yourself
    Clean the mounting seats of the tie rod end. Use a wire brush. Use WD-40 spray.
  12. Step 13
    Screw on a new tie rod end.
    Replacement: track rod end – VW PASSAT (3G2). Professionals recommend:
    While installing the steering rod end remember to make the same number of turns or to leave the same length of thread showing as per your measurements.
    Step 14
    Passat Saloon (3G2, CB2) 1.4 GTE Hybrid 2014 Track Rod End DIY replacement workshop manual
    Connect the tie rod end to the steering knuckle.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the VW Passat B8 Saloon (3G2, CB2) model.

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
VW Passat Saloon (3G2, CB2) Track Rod End replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY VW Passat Saloon (3G2, CB2) Track Rod End replacement - online guide
Tips & tricks for your VW Passat Saloon (3G2, CB2)
View more
  • How to change Tie rod end on VW Passat Saloon (3G2, CB2) 2.0 TDI 4motion - replacement tricks
    Important differences between car tools | AUTODOC tips
  • Changing Outer tie rod VW Passat B8 3G Saloon 2.0 TDI - Replacement Tips
    Top 5 mistakes when working in the engine bay | AUTODOC tips
  • Maintenance Hacks - VW Passat Saloon (3G2, CB2) 1.6 TDI Track rod end ball joint replacement guide
    What to do if the belt squeals | AUTODOC tips
  • Replace Outer tie rod end on VW Passat B8 3G Saloon - free video tips
    5 most common causes of oil leaks | AUTODOC tips