Important!
This replacement procedure can be used for:
VW Beetle Convertible (5C7, 5C8) 1.2 TSI, VW Beetle Convertible (5C7, 5C8) 1.4 TSI, VW Beetle Convertible (5C7, 5C8) 1.6 TDI, VW Beetle Convertible (5C7, 5C8) 2.0 TDI, VW Beetle Convertible (5C7, 5C8) 2.0 TFSI, VW Beetle Convertible (5C7, 5C8) 2.0 TSI, VW Beetle Convertible (5C7, 5C8) 2.0 TDI, VW Beetle Convertible (5C7, 5C8) 2.0 TSI, VW Beetle Convertible (5C7, 5C8) 1.4 TSI, VW Beetle Convertible (5C7, 5C8) 2.0 TDI, VW Beetle Convertible (5C7, 5C8) 2.5, VW Beetle Convertible (5C7, 5C8) 1.2 TSI 16V View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Track Rod End for Beetle Convertible (5C7, 5C8) and other VW models
Tools
Replacement: track rod end – VW BEETLE Convertible (5C7). Tools you might need:
Wire brush
WD-40 spray
Brake cleaner
Copper grease
Combination spanner #22
Combination spanner #24
Drive socket # 18
Wheel impact socket #17
Ratchet wrench
Torque wrench
Vernier caliper
Tap wrench
Wheel chock
Replacement: track rod end – VW BEETLE Convertible (5C7). Tip from AUTODOC experts:
  • Replace tie rod ends in pairs.
  • The replacement procedure is identical for the right and left tie rod ends.
  • All work should be done with the engine stopped.
Replacement: track rod end – VW BEETLE Convertible (5C7). Use the following procedure:
  1. Step 1
    How to change Track Rod End on VW Beetle Convertible 2011 - free PDF and video manuals
    Secure the wheels with chocks.
  2. Step 2
    How to replace VW Beetle Convertible (5C7, 5C8) 1.2 TSI 2012 Track Rod End - step-by-step manuals and video guides
    Loosen the wheel mounting bolts. Use wheel impact socket #17.
  3. Step 3
    Raise the front of the car and secure on supports.
    Step 4
    VW Beetle Convertible 1.6 TDI 2013 Track Rod End replacement: free workshop manuals
    Unscrew the wheel bolts.
    Replacement: track rod end – VW BEETLE Convertible (5C7). AUTODOC recommends:
    To avoid injury, hold up the wheel when unscrewing the bolts.
  4. Step 5
    Changing Track Rod End on VW Beetle Convertible (5C7, 5C8) 1.2 TSI 16V 2014 by yourself
    Remove the wheel.
  5. Step 6
    How to remove VW BEETLE 2.0 TDI 2015 Track Rod End - online easy-to-follow instructions
    Clean the fastener connecting the tie rod end to the steering knuckle. Use a wire brush. Use WD-40 spray.
  6. Step 7
    How to replace Track Rod End on VW Beetle Convertible (5C7, 5C8) 2016: download PDF manuals and video instructions
    Unscrew the end fastening nut to the steering knuckle. Use a drive socket #18. Use a tap wrench.
  7. Step 8
    How hard is it to do yourself: Track Rod End replacement on VW Beetle Convertible 2.0 TSI 2017 - download illustrated guide
    When deinstalling, mark or measure the precise position of the ball joint on the track rod, or count the number of turns in order to prevent misalignment afterward. Use a vernier caliper.
  8. Step 9
    Need to know how to renew Track Rod End on VW BEETLE 2018? This free workshop manual will help you to do it yourself
    Loosen the lock nut securing the tie rod end to the tie rod. Use a combination spanner #24.
  9. Step 10
    Changing of Track Rod End on VW Beetle Convertible 2019 won't be an issue if you follow this illustrated step-by-step guide
    Disconnect the tie rod end from the steering knuckle.
  10. Step 11
    VW BEETLE 1.6 TDI Track Rod End replacement: online guides and video tutorials
    Screw the end out of the tie rod.
  11. Step 12
    Replacing Track Rod End on VW Beetle Convertible 2012 1.2 TSI by yourself
    Clean the mounting seats of the tie rod end. Use a wire brush. Use WD-40 spray.
  12. Step 13
    Screw on a new tie rod end.
    Replacement: track rod end – VW BEETLE Convertible (5C7). Professionals recommend:
    While installing the steering rod end remember to make the same number of turns or to leave the same length of thread showing as per your measurements.
    Step 14
    Beetle Convertible (5C7, 5C8) 2.0 TDI 2013 Track Rod End DIY replacement workshop manual
    Connect the tie rod end to the steering knuckle.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the VW Beetle Convertible (5C7, 5C8) model.

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
VW Beetle Convertible (5C7, 5C8) Track Rod End replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY VW Beetle Convertible (5C7, 5C8) Track Rod End replacement - online guide
Tips & tricks for your VW Beetle Convertible (5C7, 5C8)
View more
  • How to change Tie rod end on VW Beetle Convertible (5C7, 5C8) 1.4 TSI - replacement tricks
    How do EGR valves work? | AUTODOC
  • Changing Outer tie rod VW Beetle Convertible 1.2 TSI - Replacement Tips
    How to polish an old engine valve cover to a shiny finish | AUTODOC Tips
  • Maintenance Hacks - VW Beetle Convertible (5C7, 5C8) 1.6 TDI Track rod end ball joint replacement guide
    Car checks you need to carry out on your car after the winter | AUTODOC tips
  • Replace Outer tie rod end on VW Beetle Convertible - free video tips
    DIY jack restoration | AUTODOC tips