
Disclaimer
How to change track rod end on VAUXHALL Zafira Mk II (B) (A05) – replacement guide
downloads:
11
Views:
69
Important!
This replacement procedure can be used for:
VAUXHALL Zafira Mk II (B) (A05) 1.7 CDTI, VAUXHALL Zafira Mk II (B) (A05) 1.6, VAUXHALL Zafira Mk II (B) (A05) 1.8, VAUXHALL Zafira Mk II (B) (A05) 2.2, VAUXHALL Zafira Mk II (B) (A05) 1.9 CDTI, VAUXHALL Zafira Mk II (B) (A05) 2.0, VAUXHALL Zafira Mk II (B) (A05) 2.0, VAUXHALL Zafira Mk II (B) (A05) 1.9 CDTI, VAUXHALL Zafira Mk II (B) (A05) 1.6, VAUXHALL Zafira Mk II (B) (A05) 1.7 CDTI, VAUXHALL Zafira Mk II (B) (A05) 1.8 … View more
The steps may slightly vary depending on the car design.
VAUXHALL Zafira Mk II (B) (A05) 1.7 CDTI, VAUXHALL Zafira Mk II (B) (A05) 1.6, VAUXHALL Zafira Mk II (B) (A05) 1.8, VAUXHALL Zafira Mk II (B) (A05) 2.2, VAUXHALL Zafira Mk II (B) (A05) 1.9 CDTI, VAUXHALL Zafira Mk II (B) (A05) 2.0, VAUXHALL Zafira Mk II (B) (A05) 2.0, VAUXHALL Zafira Mk II (B) (A05) 1.9 CDTI, VAUXHALL Zafira Mk II (B) (A05) 1.6, VAUXHALL Zafira Mk II (B) (A05) 1.7 CDTI, VAUXHALL Zafira Mk II (B) (A05) 1.8 … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Track Rod End for Zafira Mk II (B) (A05) and other VAUXHALL models
Track rod end
Alternative products

Wire brush
WD-40 spray
Brake cleaner
Copper grease
Combination spanner #22
Drive socket # 18
Wheel impact socket #17
Ratchet wrench
Torque wrench
Vernier caliper
Ball joint puller
Wheel chock
Replacement: track rod end – VAUXHALL ZAFIRA Mk II (B) (M75). AUTODOC experts recommend:
- Replace tie rod ends in pairs.
- The replacement procedure is identical for the right and left tie rod ends.
- Please note: all work on the car – VAUXHALL ZAFIRA Mk II (B) (M75) – should be done with the engine switched off.
Carry out replacement in the following order:
- Step 1Secure the wheels with chocks.
- Step 2Loosen the wheel mounting bolts. Use wheel impact socket #17.
- Step 3Raise the front of the car and secure on supports.Step 4Unscrew the wheel bolts.AUTODOC recommends:Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. VAUXHALL ZAFIRA Mk II (B) (M75)
- Step 5Remove the wheel.
- Step 6When deinstalling, mark or measure the precise position of the ball joint on the track rod, or count the number of turns in order to prevent misalignment afterward. Use a vernier caliper.
- Step 7Clean the fastener connecting the tie rod end to the steering knuckle. Use a wire brush. Use WD-40 spray.
- Step 8Unscrew the end fastening nut to the steering knuckle. Use a drive socket #18. Use a ratchet wrench.
- Step 9Disconnect the tie rod end from the steering knuckle. Use a ball joint puller.
- Step 10Clean the lock nut that connects the tie rod to the tie rod end. Use a wire brush. Use WD-40 spray.
- Step 11Loosen the lock nut securing the tie rod end to the tie rod. Use a combination spanner #22.
- Step 12Screw the end out of the tie rod.
- Step 13Clean the mounting seats of the tie rod end. Use a wire brush. Use WD-40 spray.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the VAUXHALL Zafira Mk2 (B) (A05) model
Popular maintenance tutorials for Vauxhall Zafira B
Complete guides for changing the Tie rod end on different VAUXHALL ZAFIRA models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your VAUXHALL Zafira Mk II (B) (A05)
View more
- TOP 6 WD-40 lifehacks | AUTODOC tips
- 5 mistakes made when washing the engine | AUTODOC tips
- BMW E30 Turbo Suspension Swap: Boost Your Handling | AUTODOC project
- 5 Ways You’re Scrubbing Your Car Wrong | AUTODOC Tips
Most commonly replaced car parts on VAUXHALL ZAFIRA
Time to replace parts? Get even better deals in our Shop app.

SCAN ME