Important!
This replacement procedure can be used for:
VAUXHALL COMBO TOUR Mk II (C) (F25) 1.4, VAUXHALL COMBO TOUR Mk II (C) (F25) 1.6, VAUXHALL COMBO TOUR Mk II (C) (F25) 1.3 CDTI 16V, VAUXHALL COMBO TOUR Mk II (C) (F25) 1.3 CDTI 16V, VAUXHALL COMBO TOUR Mk II (C) (F25) 1.7 DI 16V, VAUXHALL COMBO TOUR Mk II (C) (F25) 1.7 DTI 16V, VAUXHALL COMBO TOUR Mk II (C) (F25) 1.7 CDTI 16V View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Track Rod End for COMBO TOUR Mk II (C) (F25) and other VAUXHALL models
Alternative products
How to change Track rod end on VAUXHALL COMBO TOUR Mk II (C) (F25) 1.3 CDTI 16V – step-by-step instructions for straightforward car repair Track rod end
Tools
Replacement: track rod end – VAUXHALL COMBO TOUR Mk II (C) (F25). Tools you need:
Wire brush
WD-40 spray
Brake cleaner
Copper grease
Combination spanner #19
Drive socket # 17
Wheel impact socket #17
Ratchet wrench
Torque wrench
Vernier caliper
Ball joint puller
Wheel chock
Replacement: track rod end – VAUXHALL COMBO TOUR Mk II (C) (F25). AUTODOC recommends:
  • Replace tie rod ends in pairs.
  • The replacement procedure is identical for the right and left tie rod ends.
  • All work should be done with the engine stopped.
Replacement: track rod end – VAUXHALL COMBO TOUR Mk II (C) (F25). Use the following procedure:
  1. Step 1
    How to change Track Rod End on VAUXHALL COMBO TOUR Mk II (C) (F25) 2001 - free PDF and video manuals
    Secure the wheels with chocks.
  2. Step 2
    How to replace VAUXHALL COMBO TOUR Mk II (C) (F25) 1.3 CDTI 16V 2002 Track Rod End - step-by-step manuals and video guides
    Loosen the wheel mounting bolts. Use wheel impact socket #17.
  3. Step 3
    Raise the front of the car and secure on supports.
    Step 4
    VAUXHALL COMBO TOUR Mk II (C) (F25) 1.4 2003 Track Rod End replacement: free workshop manuals
    Unscrew the wheel bolts.
    AUTODOC recommends:
    Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. VAUXHALL COMBO TOUR Mk II (C) (F25)
  4. Step 5
    Changing Track Rod End on VAUXHALL COMBO TOUR Mk II (C) (F25) 1.6 2004 by yourself
    Remove the wheel.
  5. Step 6
    Clean the fastener connecting the tie rod end to the steering knuckle. Use a wire brush. Use WD-40 spray.
    Step 7
    How to remove VAUXHALL COMBO 1.7 DI 16V 2005 Track Rod End - online easy-to-follow instructions
    When deinstalling, mark or measure the precise position of the ball joint on the track rod, or count the number of turns in order to prevent misalignment afterward. Use a vernier caliper.
  6. Step 8
    How to replace Track Rod End on VAUXHALL COMBO TOUR Mk II (C) (F25) 2006: download PDF manuals and video instructions
    Unscrew the end fastening nut to the steering knuckle. Use a drive socket #17. Use a ratchet wrench.
  7. Step 9
    How hard is it to do yourself: Track Rod End replacement on VAUXHALL COMBO TOUR Mk II (C) (F25) 1.7 CDTI 16V 2007 - download illustrated guide
    Disconnect the tie rod end from the steering knuckle. Use a ball joint puller.
  8. Step 10
    Need to know how to renew Track Rod End on VAUXHALL COMBO 2008? This free workshop manual will help you to do it yourself
    Loosen the lock nut securing the tie rod end to the tie rod. Use a combination spanner #19.
  9. Step 11
    Changing of Track Rod End on VAUXHALL COMBO TOUR Mk II (C) (F25) 2009 won't be an issue if you follow this illustrated step-by-step guide
    Screw the end out of the tie rod.
  10. Step 12
    VAUXHALL COMBO 1.4 Track Rod End replacement: online guides and video tutorials
    Clean the mounting seats of the tie rod end. Use a wire brush. Use WD-40 spray.
  11. Step 13
    Replacing Track Rod End on VAUXHALL COMBO TOUR Mk II (C) (F25) 2011 1.3 CDTI 16V by yourself
    Screw on a new tie rod end.
    Replacement: track rod end – VAUXHALL COMBO TOUR Mk II (C) (F25). Professionals recommend:
    While installing the steering rod end remember to make the same number of turns or to leave the same length of thread showing as per your measurements.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the VAUXHALL Combo Tour Mk2 (C) (F25) model

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY VAUXHALL COMBO TOUR Mk II (C) (F25) Track Rod End replacement - online guide
Tips & tricks for your VAUXHALL COMBO TOUR Mk II (C) (F25)
View more
  • How to change Tie rod end on VAUXHALL COMBO TOUR Mk II (C) (F25) 1.6 CNG - replacement tricks
    Regain Your Confidence on the Road: Easy Headlight Restoration Tips
  • Changing Outer tie rod VAUXHALL COMBO TOUR Mk II (C) (F25) 1.3 CDTI 16V - Replacement Tips
    #DIY guide: Changing your car's color with a spray can | AUTODOC tips
  • Maintenance Hacks - VAUXHALL COMBO TOUR Mk II (C) (F25) 1.4 Track rod end ball joint replacement guide
    7 signs of faulty fuel injectors | AUTODOC tips
  • Replace Outer tie rod end on VAUXHALL COMBO TOUR Mk II (C) (F25) - free video tips
    Preventing Engine Failure: Head Gasket Inspection Tutorial | AUTODOC
Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
VAUXHALL COMBO TOUR Mk II (C) (F25) Track Rod End replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME