Important!
This replacement procedure can be used for:
CITROËN VISA Convertible 11 RE View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Track Rod End for VISA Convertible and other CITROËN models
Tools
Replacement: track rod end – CITROËN VISA Convertible. Tools you'll need:
Wire brush
WD-40 spray
Brake cleaner
Copper grease
Combination spanner #19
Combination spanner #21
Drive socket # 17
Wheel impact socket #19
Torque wrench
Tap wrench
Vernier caliper
Ball joint puller
Wheel chock
Replacement: track rod end – CITROËN VISA Convertible. AUTODOC experts recommend:
  • Replace tie rod ends in pairs.
  • The replacement procedure is identical for the right and left tie rod ends.
  • During the installation process, use only new bolts and nuts.
  • Please note: all work on the car – CITROËN VISA Convertible – should be done with the engine switched off.
Carry out replacement in the following order:
  1. Step 1
    How to change Track Rod End on CITROËN VISA Convertible 1983 - free PDF and video manuals
    Secure the wheels with chocks.
  2. Step 2
    How to replace CITROËN VISA Convertible 1.1 R 1984 Track Rod End - step-by-step manuals and video guides
    Loosen the wheel mounting bolts. Use wheel impact socket #19.
  3. Step 3
    Raise the front of the car and secure on supports.
    Step 4
    CITROËN VISA Convertible 1.1 R 1985 Track Rod End replacement: free workshop manuals
    Unscrew the wheel bolts.
    Replacement: track rod end – CITROËN VISA Convertible. Tip from AUTODOC:
    To avoid injury, hold up the wheel when unscrewing the bolts.
  4. Step 5
    Changing Track Rod End on CITROËN VISA Convertible 1.1 R 1986 by yourself
    Remove the wheel.
  5. Step 6
    How to remove CITROËN VISA 1.1 R 1987 Track Rod End - online easy-to-follow instructions
    Clean the fastener connecting the tie rod end to the steering knuckle. Use a wire brush. Use WD-40 spray.
  6. Step 7
    How to replace Track Rod End on CITROËN VISA Convertible 1988: download PDF manuals and video instructions
    When deinstalling, mark or measure the precise position of the ball joint on the track rod, or count the number of turns in order to prevent misalignment afterward. Use a vernier caliper.
  7. Step 8
    How hard is it to do yourself: Track Rod End replacement on CITROËN VISA Convertible 1.1 R 1983 - download illustrated guide
    Loosen the lock nut securing the tie rod end to the tie rod. Use a combination spanner #21 (2 pieces).
  8. Step 9
    Need to know how to renew Track Rod End on CITROËN VISA 1984? This free workshop manual will help you to do it yourself
    Unscrew the end fastening nut to the steering knuckle. Use a drive socket #17. Use a tap wrench.
  9. Step 10
    Changing of Track Rod End on CITROËN VISA Convertible 1985 won't be an issue if you follow this illustrated step-by-step guide
    Disconnect the tie rod end from the steering knuckle. Use a ball joint puller.
  10. Step 11
    CITROËN VISA 1.1 R Track Rod End replacement: online guides and video tutorials
    Screw the end out of the tie rod.
  11. Step 12
    Replacing Track Rod End on CITROËN VISA Convertible 1987 1.1 R by yourself
    Clean the mounting seats of the tie rod end. Use a wire brush. Use WD-40 spray.
  12. Step 13
    VISA Convertible 1.1 R 1988 Track Rod End DIY replacement workshop manual
    Screw on a new tie rod end.
    Replacement: track rod end – CITROËN VISA Convertible. AUTODOC recommends:
    While installing the steering rod end remember to make the same number of turns or to leave the same length of thread showing as per your measurements.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the CITROËN Visa Convertible model.

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
CITROËN VISA Convertible Track Rod End replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY CITROËN VISA Convertible Track Rod End replacement - online guide
Tips & tricks for your CITROËN VISA Convertible
View more
  • How to change Tie rod end on CITROËN VISA Convertible 1.1 R - replacement tricks
    TOP 6 WD-40 lifehacks | AUTODOC tips
  • Changing Outer tie rod CITROËN VISA Convertible 1.1 R - Replacement Tips
    How to reduce fuel consumption | AUTODOC
  • Maintenance Hacks - CITROËN VISA Convertible 1.1 R Track rod end ball joint replacement guide
    Replacing your engine cooling fan | AUTODOC tips
  • Replace Outer tie rod end on CITROËN VISA Convertible - free video tips
    Coolant comparison test | AUTODOC