Important!
This replacement procedure can be used for:
CITROËN C3 Pluriel (HB_) 1.6, CITROËN C3 Pluriel (HB_) 1.4, CITROËN C3 Pluriel (HB_) 1.4 HDi, CITROËN C3 Pluriel (HB_) 1.4 View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

Tools
Replacement: track rod end – CITROËN C3 Pluriel (HB_). List of the tools you'll need:
Wire brush
WD-40 spray
Brake cleaner
Copper grease
Combination spanner #22
Drive socket # 17
Wheel impact socket #17
Ratchet wrench
Torque wrench
Tap wrench
Vernier caliper
Wheel chock
Replacement: track rod end – CITROËN C3 Pluriel (HB_). Tip:
  • Replace tie rod ends in pairs.
  • The replacement procedure is identical for the right and left tie rod ends.
  • During the installation process, use only new bolts and nuts.
  • All work should be done with the engine stopped.
Replacement: track rod end – CITROËN C3 Pluriel (HB_). Recommended sequence of steps:
  1. Step 1
    How to change Track Rod End on Citroën C3 Pluriel 2003 - free PDF and video manuals
    Secure the wheels with chocks.
  2. Step 2
    How to replace CITROËN C3 Pluriel (HB_) 1.4 HDi 2004 Track Rod End - step-by-step manuals and video guides
    Loosen the wheel mounting bolts. Use wheel impact socket #17.
  3. Step 3
    Raise the front of the car and secure on supports.
    Step 4
    Citroën C3 Pluriel 1.4 2005 Track Rod End replacement: free workshop manuals
    Unscrew the wheel bolts.
    Replacement: track rod end – CITROËN C3 Pluriel (HB_). AUTODOC recommends:
    To avoid injury, hold up the wheel when unscrewing the bolts.
  4. Step 5
    Changing Track Rod End on CITROËN C3 Pluriel (HB_) 1.4 Hybrid 2006 by yourself
    Remove the wheel.
  5. Step 6
    How to remove CITROËN C3 1.4 HDi 2007 Track Rod End - online easy-to-follow instructions
    Clean the fastener connecting the tie rod end to the steering knuckle. Use a wire brush. Use WD-40 spray.
  6. Step 7
    How to replace Track Rod End on CITROËN C3 Pluriel (HB_) 2008: download PDF manuals and video instructions
    When deinstalling, mark or measure the precise position of the ball joint on the track rod, or count the number of turns in order to prevent misalignment afterward. Use a vernier caliper.
  7. Step 8
    How hard is it to do yourself: Track Rod End replacement on Citroën C3 Pluriel 1.6 2009 - download illustrated guide
    Unscrew the end fastening nut to the steering knuckle. Use a drive socket #17. Use a tap wrench.
  8. Step 9
    Need to know how to renew Track Rod End on CITROËN C3 2010? This free workshop manual will help you to do it yourself
    Loosen the lock nut securing the tie rod end to the tie rod. Use a combination spanner #22.
  9. Step 10
    Changing of Track Rod End on Citroën C3 Pluriel 2011 won't be an issue if you follow this illustrated step-by-step guide
    Disconnect the tie rod end from the steering knuckle.
  10. Step 11
    CITROËN C3 1.4 HDi Track Rod End replacement: online guides and video tutorials
    Screw the end out of the tie rod.
  11. Step 12
    Replacing Track Rod End on Citroën C3 Pluriel 2013 1.4 HDi by yourself
    Clean the mounting seats of the tie rod end. Use a wire brush. Use WD-40 spray.
  12. Step 13
    C3 Pluriel (HB_) 1.4 HDi 2014 Track Rod End DIY replacement workshop manual
    Screw on a new tie rod end.
    Replacement: track rod end – CITROËN C3 Pluriel (HB_). AUTODOC experts recommend:
    While installing the steering rod end remember to make the same number of turns or to leave the same length of thread showing as per your measurements.
  13. Step 14
    How to change Track Rod End on CITROËN C3 Pluriel (HB_) 2015 - tips and tricks
    Treat the threaded part of the tie rod. Use copper grease.
  14. Step 15
    Step-by-step recommendations for DIY replacement Citroën C3 Pluriel 2016 1.4 HDi Track Rod End
    Connect the tie rod end to the steering knuckle.
  15. Step 16
    DIY replacement of Track Rod End on CITROËN C3 Pluriel (HB_) 1.6 2017 is not an issue anymore with our step-by-step tutorial
    Screw on the fastening nut that connects the tie rod end to the steering knuckle. Use a drive socket #17. Use a ratchet wrench.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the CITROËN C3 Pluriel model.

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
CITROËN C3 Pluriel (HB_) Track Rod End replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY CITROËN C3 Pluriel (HB_) Track Rod End replacement - online guide
Tips & tricks for your CITROËN C3 Pluriel (HB_)
View more
  • How to change Tie rod end on CITROËN C3 Pluriel (HB_) 1.6 - replacement tricks
    4 reasons why your CHECK ENGINE light is on | AUTODOC tips
  • Changing Outer tie rod Citroën C3 Pluriel 1.4 HDi - Replacement Tips
    How to check your head gasket | AUTODOC
  • Maintenance Hacks - CITROËN C3 Pluriel (HB_) 1.4 Track rod end ball joint replacement guide
    The most common problems when buying a used car | AUTODOC
  • Replace Outer tie rod end on Citroën C3 Pluriel - free video tips
    DIY car soundproofing | AUTODOC tips