Disclaimer
How to change tailgate struts on VAUXHALL Meriva Mk I (A) (X03) – replacement guide
downloads:
3
Views:
54
Important!
This replacement procedure can be used for:
VAUXHALL Meriva Mk I (A) (X03) 1.7 DTI, VAUXHALL Meriva Mk I (A) (X03) 1.6 i, VAUXHALL Meriva Mk I (A) (X03) 1.6 i 16V, VAUXHALL Meriva Mk I (A) (X03) 1.8 i 16V, VAUXHALL Meriva Mk I (A) (X03) 1.7 CDTi, VAUXHALL Meriva Mk I (A) (X03) 1.3 CDTI, VAUXHALL Meriva Mk I (A) (X03) 1.6 Turbo, VAUXHALL Meriva Mk I (A) (X03) 1.4 16V Twinport, VAUXHALL Meriva Mk I (A) (X03) 1.6 i 16V Twinport, VAUXHALL Meriva Mk I (A) (X03) 1.3 CDTI … View more
The steps may slightly vary depending on the car design.
VAUXHALL Meriva Mk I (A) (X03) 1.7 DTI, VAUXHALL Meriva Mk I (A) (X03) 1.6 i, VAUXHALL Meriva Mk I (A) (X03) 1.6 i 16V, VAUXHALL Meriva Mk I (A) (X03) 1.8 i 16V, VAUXHALL Meriva Mk I (A) (X03) 1.7 CDTi, VAUXHALL Meriva Mk I (A) (X03) 1.3 CDTI, VAUXHALL Meriva Mk I (A) (X03) 1.6 Turbo, VAUXHALL Meriva Mk I (A) (X03) 1.4 16V Twinport, VAUXHALL Meriva Mk I (A) (X03) 1.6 i 16V Twinport, VAUXHALL Meriva Mk I (A) (X03) 1.3 CDTI … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Tailgate Struts for Meriva Mk I (A) (X03) and other VAUXHALL models
Alternative products

WD-40 spray
Flat Screwdriver
Hydraulic transmission jack
Replacement: tailgate struts – VAUXHALL MERIVA Mk I (A). AUTODOC experts recommend:
- Right and left gas struts of the boot lid should be replaced simultaneously.
- The replacement procedure is identical for the right and left gas struts of the boot lid.
- All work should be done with the engine stopped.
Replacement: tailgate struts – VAUXHALL MERIVA Mk I (A). Use the following procedure:
- Step 1Open the boot lid.Step 2
Support the boot lid. Use a hydraulic transmission jack. - Step 3
Release the circlip connecting the gas strut to the boot lid. Use a flat screwdriver. - Step 4
Release the circlip connecting the gas strut to the car body. Use a flat screwdriver.Replacement: tailgate struts – VAUXHALL MERIVA Mk I (A). Tip:To avoid any injuries, be sure to hold the boot lid while demounting the gas struts. - Step 5Remove the boot lid gas strut.Step 6
Clean the mounting seats of the boot strut. Use WD-40 spray. - Step 7Install the new boot lid gas strut.Replacement: tailgate struts – VAUXHALL MERIVA Mk I (A). Tip from AUTODOC experts:To avoid any injuries, be sure to hold the boot lid while installing the gas strut.Step 8
Snap on the circlip connecting the gas strut to the car body. - Step 9
Snap on the circlip connecting the gas strut to the boot lid. - Step 10
Release the circlip connecting the gas strut to the car body. Use a flat screwdriver.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the VAUXHALL Meriva Mk1 (A) (X03) model
Popular maintenance tutorials for VAUXHALL MERIVA Mk I (A)
Complete guides for changing the Tailgate struts on different VAUXHALL MERIVA models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your VAUXHALL Meriva Mk I (A) (X03)
View more
5 more brake repair mistakes | Stop making these brake repair mistakes
DIY jack restoration | AUTODOC tips
Drive with Care: 8 Common Bad Driving Habits Explained | AUTODOC
Why Checking Your Oil is Crucial for Engine Performance
Most commonly replaced car parts on VAUXHALL MERIVA
Time to replace parts? Get even better deals in our Shop app.

SCAN ME























