Disclaimer
How to change spark plugs on VAUXHALL Combo Mk I (B) Van (S93) petrol – replacement guide
downloads:
1
Views:
34
Recommended replacement interval for the part category Spark plug : 4 year / 60000 km
Important!
This replacement procedure can be used for:
VAUXHALL Combo Mk I (B) Van (S93) 1.4 … View more
The steps may slightly vary depending on the car design.
VAUXHALL Combo Mk I (B) Van (S93) 1.4 … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Spark Plug for Combo Mk I (B) Van (S93) and other VAUXHALL models
Alternative products

Electronic spray
High-temperature anti-seize lubricant
Torx bit T40
Spark plug socket # 16
Ratchet wrench
Torque wrench
Flat Screwdriver
Fender cover
Replacement: spark plugs – VAUXHALL COMBO Mk I (B). AUTODOC experts recommend:
- The replacement procedure is the same for all spark plugs.
- All work should be done with the engine stopped.
Replacement: spark plugs – VAUXHALL COMBO Mk I (B). Recommended sequence of steps:
- Step 1Open the hood.Step 2Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.Step 3
Undo the engine cover screws. Use a flat screwdriver. - Step 4
Remove the engine cover. - Step 5
Detach the connector from the ignition coil. Use a flat screwdriver. - Step 6
Unscrew the ignition coil bracket. Use Torx T40. Use a ratchet wrench. - Step 7
Take out the ignition coil from the spark plug well. Use a flat screwdriver. - Step 8
Clean dirt, dust and debris from inside the spark plug wells. - Step 9
Unscrew the spark plugs. Use the spark plug socket #16. Use a ratchet wrench.Replacement: spark plugs – VAUXHALL COMBO Mk I (B). Tip:Make sure that the threaded part of the spark plug and the electrodes are clean and dry. - Step 10
Take out the spark plugs. - Step 11
Apply a thin layer of a special high temperature anti-seize lubricant to the threads of the new spark plugs. - Step 12Install the new spark plugs into their mounting seats.Step 13
Screw new spark plugs and tighten them. Use the spark plug socket #16. Use a torque wrench. Tighten it to 24 nm torque.Replacement: spark plugs – VAUXHALL COMBO Mk I (B). Tip from AUTODOC:Don't tighten the plugs with excessive force. Exceeding tightening torque can damage the thread connection. Be careful when working with a spark plug wrench. Its skewing can cause damage to the threaded connection.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the VAUXHALL Combo Mk1 (B) Van (S93) model
Popular maintenance tutorials for VAUXHALL COMBO Mk I (B)
Complete guides for changing the Engine spark plug on different VAUXHALL COMBO models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your VAUXHALL Combo Mk I (B) Van (S93)
View more
Top Automatic Transmission Blunders You Must Dodge | AUTODOC Insights
#DIY Wheel Rim Restoration: Revive Scratches and Chips Easily!
5 most common causes of oil leaks | AUTODOC tips
Kolbenschmidt plastic gauge overview
Most commonly replaced car parts on VAUXHALL COMBO
Time to replace parts? Get even better deals in our Shop app.

SCAN ME



















