
Disclaimer
How to change spark plugs on SKODA SUPERB (3T4) – replacement guide
downloads:
8
Views:
149

Recommended replacement interval for the part category Spark plug : 6 year / 90000 km
Important!
This replacement procedure can be used for:
SKODA SUPERB (3T4) 1.8 TSI 4x4, SKODA SUPERB (3T4) 1.8 TSI, SKODA SUPERB (3T4) 2.0 TFSI, SKODA SUPERB (3T4) 1.8 TSI 4x4, SKODA SUPERB (3T4) 1.8 TSI … View more
The steps may slightly vary depending on the car design.
SKODA SUPERB (3T4) 1.8 TSI 4x4, SKODA SUPERB (3T4) 1.8 TSI, SKODA SUPERB (3T4) 2.0 TFSI, SKODA SUPERB (3T4) 1.8 TSI 4x4, SKODA SUPERB (3T4) 1.8 TSI … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Spark Plug for SUPERB (3T4) and other SKODA models
Spark plug
Alternative products

High-temperature anti-seize lubricant
Spark plug socket # 16
Ratchet wrench
Torque wrench
Fender cover
Replacement: spark plugs – SKODA SUPERB (3T4). AUTODOC recommends:
- The replacement procedure is the same for all spark plugs.
- All work should be done with the engine stopped.
Replacement: spark plugs – SKODA SUPERB (3T4). Use the following procedure:
- Step 1Open the hood.Step 2Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.Step 3Remove the engine cover.AUTODOC recommends:Raise the engine cover, holding it on two sides simultaneously.Replacement: spark plugs – SKODA SUPERB (3T4). Do not use excessive force when removing the part as this may damage it.
- Step 4Unplug the connectors from the ignition coils.
- Step 5Take out the ignition coil from the spark plug well.Replacement: spark plugs – SKODA SUPERB (3T4). Tip:Remember the sequence of steps for ignition coil demounting.
- Step 6Clean dirt, dust and debris from inside the spark plug wells.
- Step 7Unscrew the spark plugs. Use the spark plug socket #16. Use a ratchet wrench.
- Step 8Take out the spark plugs. Use the spark plug socket #16.
- Step 9Apply a thin layer of a special high temperature anti-seize lubricant to the threads of the new spark plugs.
- Step 10Install the new spark plugs into their mounting seats. Use the spark plug socket #16.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the SKODA Superb II Hatchback (3T4) model
Popular maintenance tutorials for Skoda Superb 3t
Complete guides for changing the Engine spark plug on different SKODA SUPERB models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your SKODA SUPERB (3T4)
View more
- Don’t Replace, Restore: Fixing Damaged Threads at Home
- DIY car soundproofing | AUTODOC tips
- The most common problems when buying a used car | AUTODOC
- How I started restoring a driveshaft | Drivetrain restoration – Part 1
Most commonly replaced car parts on SKODA SUPERB
Time to replace parts? Get even better deals in our Shop app.

SCAN ME