When to replace the Poly V-Belt on your VW TRANSPORTER
Recommended replacement interval for the part category Serpentine belt : 30000 km
Important!
This replacement procedure can be used for:
VW Transporter IV Van (70A, 70H, 7DA, 7DH) 2.0 View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Poly V-Belt for Transporter IV Van (70A, 70H, 7DA, 7DH) and other VW models
Alternative products
How to change Serpentine belt on VW T4 2.5 TDI – step-by-step instructions for straightforward car repair Serpentine belt
Tools
Replacement: serpentine belt – VW TRANSPORTER IV Box (70XA). List of the tools you'll need:
Torque wrench
Combination spanner #16
Wheel impact socket #17
Fender cover
Wheel chock
Replacement: serpentine belt – VW TRANSPORTER IV Box (70XA). AUTODOC experts recommend:
  • All work should be done with the engine stopped.
Carry out replacement in the following order:
  1. Step 1
    Open the bonnet.
    Step 2
    Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
    Step 3
    Secure the wheels with chocks.
    Step 4
    Loosen the wheel mounting bolts. Use wheel impact socket #17.
    Step 5
    Lift the car using a jack or place it over an inspection pit.
    Step 6
    Unscrew the wheel bolts.
    AUTODOC recommends:
    Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. VW TRANSPORTER IV Box (70XA)
    Step 7
    Remove the wheel.
    Step 8
    How to change Poly V-Belt on VW T4 1990 - free PDF and video manuals
    Pull aside the V-ribbed belt tensioner pulley. Use a combination spanner #16.
  2. Step 9
    How to replace VW Transporter IV Van (70A, 70H, 7DA, 7DH) 2.5 TDI 1991 Poly V-Belt - step-by-step manuals and video guides
    Remove the V-ribbed belt.
  3. Step 10
    Return the tensioner pulley to its initial position. Use a combination spanner #16.
    Replacement: serpentine belt – VW TRANSPORTER IV Box (70XA). Professionals recommend:
    Check the condition of the tensioner pulley and idler pulley. Replace them if necessary.
    Step 11
    Pull aside the V-ribbed belt tensioner pulley. Use a combination spanner #16.
    Step 12
    VW T4 1.9 TD 1992 Poly V-Belt replacement: free workshop manuals
    Install the V-ribbed belt.
    Replacement: serpentine belt – VW TRANSPORTER IV Box (70XA). Tip:
    Make sure that the V-ribbed belt fits all pulleys snugly.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the VW Transporter T4 Van (70A, 70H, 7DA, 7DH) model

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY VW Transporter IV Van (70A, 70H, 7DA, 7DH) Poly V-Belt replacement - online guide
Tips & tricks for your VW Transporter IV Van (70A, 70H, 7DA, 7DH)
View more
  • How to change Alternator belt on VW Transporter IV Van (70A, 70H, 7DA, 7DH) 2.4 D - replacement tricks
    Easy Steps to Fix Minor Scratches on Your Vehicle | AUTODOC tips
  • Changing Auxiliary belt VW T4 2.5 TDI - Replacement Tips
    5 more brake repair mistakes | Stop making these brake repair mistakes
  • Maintenance Hacks - VW Transporter IV Van (70A, 70H, 7DA, 7DH) 1.9 TD Poly V-belt replacement guide
    5 Ways You’re Scrubbing Your Car Wrong | AUTODOC Tips
  • Replace Drive belt on VW T4 - free video tips
    5 Essential Tips for beginner drivers: Avoid Common Mistakes
Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
VW Transporter IV Van (70A, 70H, 7DA, 7DH) Poly V-Belt replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME