When to replace the Poly V-Belt on your SEAT IBIZA
Recommended replacement interval for the part category Serpentine belt : 30000 km
Important!
This replacement procedure can be used for:
SEAT Ibiza IV ST (6J8, 6P8) 1.2 TDI, SEAT Ibiza IV ST (6J8, 6P8) 1.6 TDI, SEAT Ibiza IV ST (6J8, 6P8) 1.6 TDI View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Poly V-Belt for Ibiza IV ST (6J8, 6P8) and other SEAT models
Tools
Replacement: serpentine belt – SEAT IBIZA V ST (6J8, 6P8). List of the tools you'll need:
Torque wrench
Combination spanner #16
Wheel impact socket #17
Fender cover
Wheel chock
Replacement: serpentine belt – SEAT IBIZA V ST (6J8, 6P8). AUTODOC experts recommend:
  • All work should be done with the engine stopped.
Carry out replacement in the following order:
  1. Step 1
    Open the bonnet.
    Step 2
    Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
    Step 3
    Secure the wheels with chocks.
    Step 4
    Loosen the wheel mounting bolts. Use wheel impact socket #17.
    Step 5
    Lift the car using a jack or place it over an inspection pit.
    Step 6
    Unscrew the wheel bolts.
    AUTODOC recommends:
    Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. SEAT IBIZA V ST (6J8, 6P8)
    Step 7
    Remove the wheel.
    Step 8
    How to change Poly V-Belt on Seat Ibiza 6j Estate 2010 - free PDF and video manuals
    Pull aside the V-ribbed belt tensioner pulley. Use a combination spanner #16.
  2. Step 9
    How to replace SEAT Ibiza IV ST (6J8, 6P8) 1.2 TDI 2011 Poly V-Belt - step-by-step manuals and video guides
    Remove the V-ribbed belt.
  3. Step 10
    Return the tensioner pulley to its initial position. Use a combination spanner #16.
    Replacement: serpentine belt – SEAT IBIZA V ST (6J8, 6P8). Professionals recommend:
    Check the condition of the tensioner pulley and idler pulley. Replace them if necessary.
    Step 11
    Pull aside the V-ribbed belt tensioner pulley. Use a combination spanner #16.
    Step 12
    Seat Ibiza 6j Estate 1.6 TDI 2012 Poly V-Belt replacement: free workshop manuals
    Install the V-ribbed belt.
    Replacement: serpentine belt – SEAT IBIZA V ST (6J8, 6P8). Tip:
    Make sure that the V-ribbed belt fits all pulleys snugly.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the SEAT Ibiza IV ST (6J8, 6P8) model.

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
SEAT Ibiza IV ST (6J8, 6P8) Poly V-Belt replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY SEAT Ibiza IV ST (6J8, 6P8) Poly V-Belt replacement - online guide
Tips & tricks for your SEAT Ibiza IV ST (6J8, 6P8)
View more
  • How to change Alternator belt on SEAT Ibiza IV ST (6J8, 6P8) 1.4 - replacement tricks
    5 common car washing mistakes | AUTODOC tips
  • Changing Auxiliary belt Seat Ibiza 6j Estate 1.2 TDI - Replacement Tips
    Important differences between car tools | AUTODOC tips
  • Maintenance Hacks - SEAT Ibiza IV ST (6J8, 6P8) 1.6 TDI Poly V-belt replacement guide
    Replacing your engine cooling fan | AUTODOC tips
  • Replace Drive belt on Seat Ibiza 6j Estate - free video tips
    Top 5 reasons why the suspension knocks | AUTODOC tips