How to carry out replacement: Poly V-Belt 1.4 Renault Symbol Thalia
Disclaimer
Change Renault Symbol Thalia 1.5 dCi Poly V-Belt yourself – manuals and video tutorials

How to change serpentine belt on RENAULT Symbol / Thalia I (LB) – replacement guide

downloads: 16
Views: 326
Download your free tutorial and fix RENAULT Thalia I (LB_) 1.4 16V problems yourself Download for free 1.97 MB Poly V-Belt for Renault Symbol Thalia Shop now
Leave a comment Open in a new tab
When to replace the Poly V-Belt on your RENAULT SYMBOL / THALIA
Recommended replacement interval for the part category Serpentine belt : 5 year / 120000 km
Important!
This replacement procedure can be used for:
RENAULT Thalia I (LB_) 1.6 16V, RENAULT Thalia I (LB_) 1.4 16V, RENAULT Thalia I (LB_) 1.4 … View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Poly V-Belt for Thalia I (LB_) and other RENAULT models
Alternative products
How to change Serpentine belt on Renault Symbol Thalia 1.4 – step-by-step instructions for straightforward car repair Serpentine belt
Tools
Replacement: serpentine belt – RENAULT THALIA I (LB0/1/2_). Tools you need:
Torque wrench
Combination spanner #13
Drive socket # 18
Wheel impact socket #19
Ratchet wrench
Phillips Screwdriver
Fender cover
Wheel chock
Buy tools
AUTODOC recommends:
  • Please note: all work on the car – RENAULT THALIA I (LB0/1/2_) – should be done with the engine switched off.
Carry out replacement in the following order:
  1. Step 1
    Open the bonnet.
    Step 2
    Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
    Step 3
    How to change Poly V-Belt on Renault Symbol Thalia 1998 - free PDF and video manuals
    Secure the wheels with chocks. Loosen the wheel mounting bolts. Use wheel impact socket #19.
  2. Step 4
    Raise the car.
    Replacement: serpentine belt – RENAULT THALIA I (LB0/1/2_). Tip from AUTODOC:
    If you are using a jack, make sure it rests on a flat surface without any unevenness.Be sure to additionally secure the car with jack stands.
    Step 5
    How to replace RENAULT Thalia I (LB_) 1.4 1999 Poly V-Belt - step-by-step manuals and video guides
    Unscrew the wheel bolts.
    AUTODOC recommends:
    Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. RENAULT THALIA I (LB0/1/2_)
  3. Step 6
    Renault Symbol Thalia 1.4 16V 2000 Poly V-Belt replacement: free workshop manuals
    Remove the wheel.
  4. Step 7
    Changing Poly V-Belt on RENAULT Thalia I (LB_) 1.2 16V 2001 by yourself
    Unscrew and remove the wheel arch cover fasteners. Use a Phillips screwdriver.
  5. Step 8
    How to remove RENAULT SYMBOL / THALIA 1.0 Expression Hi-Flex (LB3B) 2002 Poly V-Belt - online easy-to-follow instructions
    Remove the wheel arch cover.
  6. Step 9
    How to replace Poly V-Belt on RENAULT Thalia I (LB_) 2003: download PDF manuals and video instructions
    Pull aside the V-ribbed belt tensioner pulley. Use a combination spanner #13.
  7. Step 10
    How hard is it to do yourself: Poly V-Belt replacement on Renault Symbol Thalia 1.4 2004 - download illustrated guide
    Remove the V-ribbed belt.
    Replacement: serpentine belt – RENAULT THALIA I (LB0/1/2_). Professionals recommend:
    Check the condition of the tensioner pulley and idler pulley. Replace them if necessary.
  8. Step 11
    Need to know how to renew Poly V-Belt on RENAULT SYMBOL / THALIA 2005? This free workshop manual will help you to do it yourself
    Install the V-ribbed belt.
    AUTODOC recommends:
    Make sure that the V-ribbed belt fits all pulleys snugly.
  9. Step 12
    Changing of Poly V-Belt on Renault Symbol Thalia 2006 won't be an issue if you follow this illustrated step-by-step guide
    Pull aside the V-ribbed belt tensioner pulley. Use a combination spanner #13.
  10. Step 13
    RENAULT SYMBOL / THALIA 1.5 dCi Poly V-Belt replacement: online guides and video tutorials
    Place the V-ribbed belt on the tensioner pulley. Return the tensioner pulley to its initial position.
  11. Step 14
    Replacing Poly V-Belt on Renault Symbol Thalia 2008 1.4 by yourself
    Rotate the crankshaft several times to check whether the new V-ribbed belt is working correctly. Use a drive socket #18. Use a ratchet wrench.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the RENAULT Symbol / Thalia I (LB) model

Renault Symbol Thalia tyre size

Popular maintenance tutorials for Renault Symbol Thalia

More manuals for Renault Symbol Thalia

Complete guides for changing the Alternator belt on different RENAULT SYMBOL / THALIA models

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY RENAULT Thalia I (LB_) Poly V-Belt replacement - online guide
Tips & tricks for your RENAULT Thalia I (LB_)
View more
  • How to change Alternator belt on RENAULT Thalia I (LB_) 1.5 dCi - replacement tricks
    How to replace a timing chain yourself
    21K views
    Published on: 12/12/2024
  • Changing Auxiliary belt Renault Symbol Thalia 1.4 - Replacement Tips
    Easy Steps to Fix Minor Scratches on Your Vehicle | AUTODOC tips
    8K views
    Published on: 12/05/2022
  • Maintenance Hacks - RENAULT Thalia I (LB_) 1.4 16V Poly V-belt replacement guide
    How to easily repair a punctured tyre | AUTODOC tips
    3K views
    Published on: 25/02/2021
  • Replace Drive belt on Renault Symbol Thalia - free video tips
    How to Fix P0401 ✅ error code Insufficient EGR flow
    7K views
    Published on: 08/05/2025

Most commonly replaced car parts on RENAULT SYMBOL / THALIA

Professional manuals for the most common RENAULT models

ОЕ number
Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
RENAULT Thalia I (LB_) Poly V-Belt replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME