Disclaimer
How to change serpentine belt on MERCEDES-BENZ T1/TN Platform/Chassis – replacement guide
downloads:
3
Views:
90
Recommended replacement interval for the part category Serpentine belt : 30000 km
Important!
This replacement procedure can be used for:
MERCEDES-BENZ T1/TN Platform/Chassis 410 D (611.417, 611.418), MERCEDES-BENZ T1/TN Platform/Chassis 408 D (611.317, 611.318), MERCEDES-BENZ T1/TN Platform/Chassis 410 D (611.417, 611.418), MERCEDES-BENZ T1/TN Platform/Chassis 408 D (611.317, 611.318) … View more
The steps may slightly vary depending on the car design.
MERCEDES-BENZ T1/TN Platform/Chassis 410 D (611.417, 611.418), MERCEDES-BENZ T1/TN Platform/Chassis 408 D (611.317, 611.318), MERCEDES-BENZ T1/TN Platform/Chassis 410 D (611.417, 611.418), MERCEDES-BENZ T1/TN Platform/Chassis 408 D (611.317, 611.318) … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Poly V-Belt for T1/TN Platform/Chassis and other MERCEDES-BENZ models
Alternative products
Serpentine belt
Combination spanner #16
3/8" square drive extension bar
Fender cover
Replacement: serpentine belt – MERCEDES-BENZ T1/TN Platform/Chassis. AUTODOC recommends:
- All work should be done with the engine stopped.
Replacement: serpentine belt – MERCEDES-BENZ T1/TN Platform/Chassis. Take the following steps:
- Step 1Open the bonnet.Step 2
Use a fender protection cover to prevent damaging paintwork and plastic parts of the car. - Step 3
Unscrew the fastening bolt of the belt tensioner. Use a combination spanner #16 (2 pieces). - Step 4
Use a lever of the correct diameter to loosen the tensioner and remove the fastening bolt. Use a 3/8" square drive extension bar. - Step 5
Remove the V-ribbed belt.AUTODOC recommends:Check the condition of the tensioner pulley and idler pulley. Replace them if necessary. - Step 6
Install the V-ribbed belt.Replacement: serpentine belt – MERCEDES-BENZ T1/TN Platform/Chassis. Professionals recommend:Make sure that the V-ribbed belt fits all pulleys snugly. - Step 7
Return the tensioner to its original position and install the fastening bolt. Use a 3/8" square drive extension bar.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the MERCEDES-BENZ T1/TN Platform/Chassis model
Popular maintenance tutorials for MERCEDES-BENZ T1/TN Platform/Chassis
Free download PDF 1.08 MB
Free download PDF 583.68 KB
Free download PDF 1.83 MB
Free download PDF 1.18 MB
Free download PDF 1.52 MB
Complete guides for changing the Alternator belt on different MERCEDES-BENZ T1 models
Free download PDF 757.76 KB
Free download PDF 757.76 KB
Free download PDF 757.76 KB
Free download PDF 747.52 KB
Free download PDF 757.76 KB
Free download PDF 747.52 KB
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your MERCEDES-BENZ T1/TN Platform/Chassis
View more
Stop Rust Before It Starts: Top 5 Tips for Car Body Protection | AUTODOC Insights
How to tighten cylinder head bolts
How to Use Sandblasting Equipment: Step-by-Step Guide | AUTODOC Tips
How to align the timing marks correctly on an EA888 engine
Most commonly replaced car parts on MERCEDES-BENZ T1
Time to replace parts? Get even better deals in our Shop app.
SCAN ME