
Disclaimer
How to change rear wheel bearing on RENAULT Super 5 Van (s40) – replacement guide
downloads:
0
Views:
8
Important!
This replacement procedure can be used for:
RENAULT SUPER 5 Box (S40_) 1.6 D (S404), RENAULT SUPER 5 Box (S40_) 1.2 (S40F, S407), RENAULT SUPER 5 Box (S40_) 1.1 (S401), RENAULT SUPER 5 Box (S40_) 1.0 (S400) … View more
The steps may slightly vary depending on the car design.
RENAULT SUPER 5 Box (S40_) 1.6 D (S404), RENAULT SUPER 5 Box (S40_) 1.2 (S40F, S407), RENAULT SUPER 5 Box (S40_) 1.1 (S401), RENAULT SUPER 5 Box (S40_) 1.0 (S400) … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Wheel Bearing for SUPER 5 Box (S40_) and other RENAULT models
Wheel bearing kit
Alternative products

WD-40 spray
All-purpose cleaning spray
Multipurpose grease
Copper grease
Torque wrench
Drive socket # 30
Wheel impact socket #17
Tap wrench
Hammer
Rubber mallet
Bush and bearing driver set
Circlip pliers
Crow bar
Wheel chock
Replacement: wheel bearing – RENAULT SUPER 5 Box (S40_). AUTODOC experts recommend:
- Do not re-use the bearing assembly of your RENAULT SUPER 5 Box (S40_) car.
- The wheel hub bearing replacement procedure is identical for both wheels on the same axle.
- All work should be done with the engine stopped.
Replacement: wheel bearing – RENAULT SUPER 5 Box (S40_). Use the following procedure:
- Step 1Secure the wheels with chocks.Step 2Loosen the wheel mounting bolts. Use wheel impact socket #17.
- Step 3Raise the rear of the car and secure on supports.Step 4Unscrew the wheel bolts.Replacement: wheel bearing – RENAULT SUPER 5 Box (S40_). Professionals recommend:To avoid injury, hold up the wheel when unscrewing the bolts.
- Step 5Remove the wheel.
- Step 6Remove the hub bearing protection cap. Use a hammer. Use a crowbar.Replacement: wheel bearing – RENAULT SUPER 5 Box (S40_). Tip:Some cars are not equipped with wheel hub caps.
- Step 7Clean the wheel hub fastener. Use WD-40 spray.Step 8Unscrew the wheel hub axle nut. Use a drive socket #30. Use a tap wrench.
- Step 9Remove the brake drum assembled with the wheel hub bearing.Replacement: wheel bearing – RENAULT SUPER 5 Box (S40_). AUTODOC experts recommend:Examine the brake drum. Replace it if necessary.
- Step 10Clean the fasteners of the wheel hub bearing.
- Step 11Remove the wheel hub bearing retaining ring. Use circlip pliers.
- Step 12Press out the wheel hub bearing. Use a bush and bearing driver set.
- Step 13Clean the hub bearing mounting seat. Use WD-40 spray.
- Step 14Press fit the new wheel hub bearing into the brake drum. Use a bush and bearing driver set.Replacement: wheel bearing – RENAULT SUPER 5 Box (S40_). Tip from AUTODOC experts:Check to make sure the wheel hub bearing is positioned correctly. Avoid its misalignment. Stop pressing on the surface of the bearing immediately after it has been fitted into its mounting seat.
- Step 15Install the wheel hub bearing retaining ring. Use circlip pliers.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the RENAULT Super 5 Van (s40) model
Popular maintenance tutorials for Super 5 Van (s40)
Complete guides for changing the Wheel bearings on different RENAULT SUPER 5 models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your RENAULT SUPER 5 Box (S40_)
View more
- How do EGR valves work? | AUTODOC
- How to prevent car windows from fogging up | AUTODOC tips
- Extend your engine's life: Avoid these 3 damaging factors | AUTODOC tips
- The Ultimate Guide to Engine Bay Cleaning | AUTODOC
Most commonly replaced car parts on RENAULT SUPER 5
Time to replace parts? Get even better deals in our Shop app.

SCAN ME