Important!
This replacement procedure can be used for:
RENAULT 19 I Cabriolet (D53_) 1.7, RENAULT 19 I Cabriolet (D53_) 1.8 16V (D53D), RENAULT 19 I Cabriolet (D53_) 1.7, RENAULT 19 I Cabriolet (D53_) 1.7 View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

Tools
Replacement: wheel bearing – RENAULT 19 I Cabriolet (D53_). List of the tools you'll need:
Wire brush
WD-40 spray
All-purpose cleaning spray
Copper grease
Drive socket # 30
Wheel impact socket #17
Torque wrench
Tap wrench
Hammer
Circlip pliers
Bush and bearing driver set
Rubber mallet
Crow bar
Wheel chock
Replacement: wheel bearing – RENAULT 19 I Cabriolet (D53_). Professionals recommend:
  • Do not re-use the bearing assembly of your RENAULT 19 I Cabriolet (D53_) car.
  • The wheel hub bearing replacement procedure is identical for both wheels on the same axle.
  • All work should be done with the engine stopped.
Replacement: wheel bearing – RENAULT 19 I Cabriolet (D53_). Recommended sequence of steps:
  1. Step 1
    How to change Wheel Bearing on Renault 19 Convertible 1991 - free PDF and video manuals
    Secure the wheels with chocks.
  2. Step 2
    How to replace RENAULT 19 I Cabriolet (D53_) 1.8 16V 1992 Wheel Bearing - step-by-step manuals and video guides
    Loosen the wheel mounting bolts. Use wheel impact socket #17.
  3. Step 3
    Raise the rear of the car and secure on supports.
    Step 4
    Renault 19 Convertible 1.7 1991 Wheel Bearing replacement: free workshop manuals
    Unscrew the wheel bolts.
    AUTODOC recommends:
    Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. RENAULT 19 I Cabriolet (D53_)
  4. Step 5
    Changing Wheel Bearing on RENAULT 19 I Cabriolet (D53_) 1.7 1992 by yourself
    Remove the wheel.
  5. Step 6
    How to remove RENAULT 19 1.8 16V 1991 Wheel Bearing - online easy-to-follow instructions
    Clean the brake drum. Use a wire brush. Use WD-40 spray.
  6. Step 7
    How to replace Wheel Bearing on RENAULT 19 I Cabriolet (D53_) 1992: download PDF manuals and video instructions
    Remove the hub bearing protection cap. Use a hammer. Use a crowbar.
    Replacement: wheel bearing – RENAULT 19 I Cabriolet (D53_). AUTODOC recommends:
    Some cars are not equipped with wheel hub caps.
  7. Step 8
    How hard is it to do yourself: Wheel Bearing replacement on Renault 19 Convertible 1.8 16V 1991 - download illustrated guide
    Clean the wheel hub fastener. Use WD-40 spray.
  8. Step 9
    Need to know how to renew Wheel Bearing on RENAULT 19 1992? This free workshop manual will help you to do it yourself
    Unscrew the wheel hub axle nut. Use a drive socket #30. Use a tap wrench.
  9. Step 10
    Changing of Wheel Bearing on Renault 19 Convertible 1991 won't be an issue if you follow this illustrated step-by-step guide
    Remove the brake drum.
    Replacement: wheel bearing – RENAULT 19 I Cabriolet (D53_). AUTODOC experts recommend:
    Examine the brake drum. Replace it if necessary.
  10. Step 11
    RENAULT 19 1.8 16V Wheel Bearing replacement: online guides and video tutorials
    Remove the wheel hub bearing retaining ring. Use circlip pliers.
  11. Step 12
    Replacing Wheel Bearing on Renault 19 Convertible 1991 1.8 16V by yourself
    Press out the wheel hub bearing. Use a bush and bearing driver set.
  12. Step 13
    19 I Cabriolet (D53_) 1.8 16V 1992 Wheel Bearing DIY replacement workshop manual
    Clean the hub bearing mounting seat. Use WD-40 spray.
  13. Step 14
    How to change Wheel Bearing on RENAULT 19 I Cabriolet (D53_) 1991 - tips and tricks
    Press a new bearing into the wheel hub. Use a bush and bearing driver set.
    AUTODOC recommends:
    Replacement: wheel bearing – RENAULT 19 I Cabriolet (D53_). Do not use excessive force during installation. This may damage the part.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the RENAULT 19 I Convertible model.

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
RENAULT 19 I Cabriolet (D53_) Wheel Bearing replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY RENAULT 19 I Cabriolet (D53_) Wheel Bearing replacement - online guide
Tips & tricks for your RENAULT 19 I Cabriolet (D53_)
View more
  • How to change Wheel bearings on RENAULT 19 I Cabriolet (D53_) 1.8 16V - replacement tricks
    How to unlock your car without a key | AUTODOC tips
  • Changing Hub bearing Renault 19 Convertible 1.8 16V - Replacement Tips
    How to check your head gasket | AUTODOC
  • Maintenance Hacks - RENAULT 19 I Cabriolet (D53_) 1.7 Wheel bearing kit replacement guide
    What to check when buying a used car | AUTODOC tips
  • Replace Wheel hub bearing on Renault 19 Convertible - free video tips
    Important differences between car tools | AUTODOC tips