
Disclaimer
How to change rear wheel bearing on RENAULT 19 II Hatchback – replacement guide
downloads:
0
Views:
3
Important!
This replacement procedure can be used for:
RENAULT 19 II (B/C53_) 1.8 (B/C53Y), RENAULT 19 II (B/C53_) 1.8 (B/C538), RENAULT 19 II (B/C53_) 1.8 (5/353F, B/C538), RENAULT 19 II (B/C53_) 1.8 (5/353A), RENAULT 19 II (B/C53_) 1.4, RENAULT 19 II (B/C53_) 1.2, RENAULT 19 II (B/C53_) 1.8 16V, RENAULT 19 II (B/C53_) 1.9 D, RENAULT 19 II (B/C53_) 1.9 D, RENAULT 19 II (B/C53_) 1.9 D, RENAULT 19 II (B/C53_) 1.4 … View more
The steps may slightly vary depending on the car design.
RENAULT 19 II (B/C53_) 1.8 (B/C53Y), RENAULT 19 II (B/C53_) 1.8 (B/C538), RENAULT 19 II (B/C53_) 1.8 (5/353F, B/C538), RENAULT 19 II (B/C53_) 1.8 (5/353A), RENAULT 19 II (B/C53_) 1.4, RENAULT 19 II (B/C53_) 1.2, RENAULT 19 II (B/C53_) 1.8 16V, RENAULT 19 II (B/C53_) 1.9 D, RENAULT 19 II (B/C53_) 1.9 D, RENAULT 19 II (B/C53_) 1.9 D, RENAULT 19 II (B/C53_) 1.4 … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Wheel Bearing for 19 II (B/C53_) and other RENAULT models
Wheel bearing kit
Alternative products

Wire brush
WD-40 spray
All-purpose cleaning spray
Copper grease
Drive socket # 30
Wheel impact socket #17
Torque wrench
Tap wrench
Hammer
Circlip pliers
Bush and bearing driver set
Rubber mallet
Crow bar
Wheel chock
Replacement: wheel bearing – RENAULT 19 II (B/C53_). Professionals recommend:
- Do not re-use the bearing assembly of your RENAULT 19 II (B/C53_) car.
- The wheel hub bearing replacement procedure is identical for both wheels on the same axle.
- All work should be done with the engine stopped.
Replacement: wheel bearing – RENAULT 19 II (B/C53_). Recommended sequence of steps:
- Step 1Secure the wheels with chocks.
- Step 2Loosen the wheel mounting bolts. Use wheel impact socket #17.
- Step 3Raise the rear of the car and secure on supports.Step 4Unscrew the wheel bolts.AUTODOC recommends:Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. RENAULT 19 II (B/C53_)
- Step 5Remove the wheel.
- Step 6Clean the brake drum. Use a wire brush. Use WD-40 spray.
- Step 7Remove the hub bearing protection cap. Use a hammer. Use a crowbar.Replacement: wheel bearing – RENAULT 19 II (B/C53_). AUTODOC recommends:Some cars are not equipped with wheel hub caps.
- Step 8Clean the wheel hub fastener. Use WD-40 spray.
- Step 9Unscrew the wheel hub axle nut. Use a drive socket #30. Use a tap wrench.
- Step 10Remove the brake drum.Replacement: wheel bearing – RENAULT 19 II (B/C53_). AUTODOC experts recommend:Examine the brake drum. Replace it if necessary.
- Step 11Remove the wheel hub bearing retaining ring. Use circlip pliers.
- Step 12Press out the wheel hub bearing. Use a bush and bearing driver set.
- Step 13Clean the hub bearing mounting seat. Use WD-40 spray.
- Step 14Press a new bearing into the wheel hub. Use a bush and bearing driver set.AUTODOC recommends:Replacement: wheel bearing – RENAULT 19 II (B/C53_). Do not use excessive force during installation. This may damage the part.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the RENAULT 19 II Hatchback model
Popular maintenance tutorials for Renault 19 B/C53
Complete guides for changing the Wheel bearings on different RENAULT 19 models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your RENAULT 19 II (B/C53_)
View more
- DIY brake caliper restoration | AUTODOC tips
- Stop Rust Before It Starts: Top 5 Tips for Car Body Protection | AUTODOC Insights
- Extend your engine's life: Avoid these 3 damaging factors | AUTODOC tips
- Prevent Breakdowns: Key Car Checks After Winter | AUTODOC Guide
Most commonly replaced car parts on RENAULT 19
Time to replace parts? Get even better deals in our Shop app.

SCAN ME